KEG LYPH MAFYA Flip Key - WORKED - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Lverasky · 08-21-2013, 11:29 AM

Hey 86'er , I first start to a big thanks on KEG LYPH MAFYA, here is their facebook page.

https://www.facebook.com/KEGLYPHMAFYABYTCHES

They had made flip keys for numbers of FRS/BRZ owner inside/outside of the forum. So I decide to try it as well. I ship my keys to them and pick CF version for the key fob. This should take less then a week to get the keys back, but the shipment from oversea is delay so I waited for 2 weeks. But trust me, these people are great, Philip and Steve are very responsible for what they doing.

I ship both of my FRS keys to them from OR (they located in MA), and once they told me the shipment might be delay, they promise me work on my keys first prior once the shipment receive and ship with overnight shipping.

After waited for 2 weeks, finally got my keys this morning. Here are some pictures of them. The mail come in very secure packaging, A big envlope with small envelop inside, then both keys are wrap very nicely inside the small envelop. They also send me back both the Original keys and with a screw driver (FREE) in the packaging.

Every buttons on the remote (Flip Key) works 100% perfect. I do have little hard time at first to try to get both keys to start up on my car, but after put on little WD-40 on the keys. Problem resolved. I guess the keys are too NEW, my car won't take it. Glad it just fix as easy as it could be.

My Original FR-S Keys...

The new Keys Fob package I received on mail...

Unpacking the package... (Triple packaing, very secure)

Both the New Flip Keys!

Again, KEG LYPH MAFYA Flip Key is very LEGIT! I had tested.

Lverasky · 08-21-2013, 11:51 AM

Reserved for EDIT later.

lbroskee · 08-21-2013, 12:02 PM

if they need ur keys how do u drive?!

Lverasky · 08-21-2013, 12:08 PM

I used the valet key to drive

sklimo · 08-21-2013, 04:56 PM

Ricepanda · 08-21-2013, 07:10 PM

Not to dig on their work or anything, but isn't that just two $15 ebay flip keyfobs with the fake leather pulled off and then a cf vinyl applied to it?

There's a thread somewhere for a pretty simple DIY on the forums. I have the same keyfob, but with the fake leather.

Also while they did send you back the original keys it looks like at least one was destroyed to get the immobilizer chip out (it's glued in, takes a lot of effort to not break something while removing it).

That said, they do look nice with the cf vinyl. Solid choice.

kasoneblaze1024 · 08-21-2013, 07:40 PM

give klm a shout for thise keys

AG3NT_5CARFAC3 · 08-21-2013, 08:34 PM

good choice! those dudes are no joke!

Ny Brz · 08-21-2013, 09:14 PM

Looks good

van_fc3s · 08-21-2013, 10:33 PM

isnt there a chip on the metal key itself?

isnt that the reason why it was hard to do the push buttom start, cuz it needed the key?

AG3NT_5CARFAC3 · 08-21-2013, 11:08 PM

Quote:

Originally Posted by van_fc3s

isnt there a chip on the metal key itself?

isnt that the reason why it was hard to do the push buttom start, cuz it needed the key?

The chip is in the plastic part of the keys plastic shell; not in the metal part of the key

Kwisak · 08-22-2013, 12:59 AM

Looks Great

OICU812 · 08-22-2013, 02:46 AM

Pretty cool really

AG3NT_5CARFAC3 · 08-22-2013, 06:10 AM

I can understand how you would have to use a little WD-40 for the new key fitting problem; Good stuff! A little lube never hurt (thats what she said)

08-21-2013, 11:29 AM	#1
Lverasky RedBunny w/ Wing Join Date: Jan 2013 Drives: FR-S Location: PDX, OR Posts: 962 Thanks: 346 Thanked 179 Times in 155 Posts Mentioned: 22 Post(s) Tagged: 0 Thread(s)	KEG LYPH MAFYA Flip Key - WORKED Hey 86'er , I first start to a big thanks on KEG LYPH MAFYA, here is their facebook page. https://www.facebook.com/KEGLYPHMAFYABYTCHES They had made flip keys for numbers of FRS/BRZ owner inside/outside of the forum. So I decide to try it as well. I ship my keys to them and pick CF version for the key fob. This should take less then a week to get the keys back, but the shipment from oversea is delay so I waited for 2 weeks. But trust me, these people are great, Philip and Steve are very responsible for what they doing. I ship both of my FRS keys to them from OR (they located in MA), and once they told me the shipment might be delay, they promise me work on my keys first prior once the shipment receive and ship with overnight shipping. After waited for 2 weeks, finally got my keys this morning. Here are some pictures of them. The mail come in very secure packaging, A big envlope with small envelop inside, then both keys are wrap very nicely inside the small envelop. They also send me back both the Original keys and with a screw driver (FREE) in the packaging. Every buttons on the remote (Flip Key) works 100% perfect. I do have little hard time at first to try to get both keys to start up on my car, but after put on little WD-40 on the keys. Problem resolved. I guess the keys are too NEW, my car won't take it. Glad it just fix as easy as it could be. My Original FR-S Keys... The new Keys Fob package I received on mail... Unpacking the package... (Triple packaing, very secure) Both the New Flip Keys! Again, KEG LYPH MAFYA Flip Key is very LEGIT! I had tested. __________________ Firestorm FR-S MT【PDX, OR】I am just driving in normal speed. dont bother Last edited by Lverasky; 08-21-2013 at 11:50 AM.

08-21-2013, 11:51 AM	#2
Lverasky RedBunny w/ Wing Join Date: Jan 2013 Drives: FR-S Location: PDX, OR Posts: 962 Thanks: 346 Thanked 179 Times in 155 Posts Mentioned: 22 Post(s) Tagged: 0 Thread(s)	Reserved for EDIT later. __________________ Firestorm FR-S MT【PDX, OR】I am just driving in normal speed. dont bother

08-21-2013, 12:08 PM	#4
Lverasky RedBunny w/ Wing Join Date: Jan 2013 Drives: FR-S Location: PDX, OR Posts: 962 Thanks: 346 Thanked 179 Times in 155 Posts Mentioned: 22 Post(s) Tagged: 0 Thread(s)	I used the valet key to drive __________________ Firestorm FR-S MT【PDX, OR】I am just driving in normal speed. dont bother

08-21-2013, 09:14 PM	#9
Ny Brz Hella Flush Join Date: Aug 2012 Drives: 2013 SWP BRZ Location: Yonkers, NY Posts: 1,090 Thanks: 170 Thanked 332 Times in 251 Posts Mentioned: 20 Post(s) Tagged: 1 Thread(s)	Looks good __________________ Ny BRZ's Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any good stereo installers in NY area that have worked on the frs?	mikeg7827	NY / NJ / CT / PA	18	09-09-2013 11:07 PM
KEG LYPH MAFYA Flip Key Mods - Legit?	Obsidiank	Scion FR-S / Toyota 86 GT86 General Forum	27	08-11-2013 12:16 AM
KW V3: To flip or not to flip	wootwoot	Tracking / Autocross / HPDE / Drifting	40	05-07-2013 06:38 AM
Car wouldn't start, and then nothing changed and it worked fine...wtf	Spicer66	Issues \| Warranty \| Recalls / TSB	10	12-22-2012 11:25 AM
Track Video: BRZ Passes worked Miata, unable to be passed by prepped s2000	gmookher	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	1	11-06-2012 02:01 PM

08-21-2013, 07:10 PM	#6
Ricepanda Member Join Date: May 2013 Drives: Whiteout 6MT FR-S Location: Vancouver, BC Posts: 11 Thanks: 0 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Not to dig on their work or anything, but isn't that just two $15 ebay flip keyfobs with the fake leather pulled off and then a cf vinyl applied to it? There's a thread somewhere for a pretty simple DIY on the forums. I have the same keyfob, but with the fake leather. Also while they did send you back the original keys it looks like at least one was destroyed to get the immobilizer chip out (it's glued in, takes a lot of effort to not break something while removing it). That said, they do look nice with the cf vinyl. Solid choice.

08-21-2013, 07:40 PM	#7
kasoneblaze1024 Member Join Date: Apr 2013 Drives: white out frs Location: brooklyn/bronx/queens/newyork Posts: 45 Thanks: 0 Thanked 7 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	give klm a shout for thise keys

08-21-2013, 10:33 PM	#10
van_fc3s Member Join Date: May 2013 Drives: GT86 Location: Vancouver Posts: 43 Thanks: 278 Thanked 4 Times in 3 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	isnt there a chip on the metal key itself? isnt that the reason why it was hard to do the push buttom start, cuz it needed the key?

08-22-2013, 12:59 AM	#12
Kwisak Senior Member Join Date: Mar 2013 Drives: 2013 BRZ GBS Location: Arizona Posts: 261 Thanks: 65 Thanked 57 Times in 37 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Looks Great

User Name		Remember Me?
Password