Noise Generator Delete for $10.00 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

xcelir8brz · 07-05-2012, 09:26 PM

All -

Since it is a 104F degree heat as well as high humidity here in Illinois, I had to replace my aftermarket intake back to stock due to receiving P1071 A/F codes because of the humidity.

Instead of re-installing the noise generator with the stock intake, I put together my own delete from a few parts I picked up at Autozone for less than $10.00.

The fruits of my labor are shown in pictures below:

Sall · 07-05-2012, 09:59 PM

sorry but im such a noob... does this mod makes your car sound better run smoother or whats the benefit >?

xcelir8brz · 07-05-2012, 10:00 PM

Cleans up the engine bay & gets rid of the annoying intake rasp (i.e. makes car sound better).

boredom.is.me · 07-05-2012, 10:28 PM

What I've been trying to figure out is: does this hurt anything (engine, performance, whatever) in anyway?

xcelir8brz · 07-05-2012, 10:43 PM

Quote:

Originally Posted by boredom.is.me

What I've been trying to figure out is: does this hurt anything (engine, performance, whatever) in anyway?

Does not hurt anything. Simply removes the sound pumped into the cabin.

TrickyFrenchman · 07-05-2012, 10:50 PM

What did you do for the other end, near the firewall or at the firewall?

xcelir8brz · 07-05-2012, 10:52 PM

Quote:

Originally Posted by TrickyFrenchman

What did you do for the other end, near the firewall or at the firewall?

This:

JiB · 07-05-2012, 11:04 PM

had an amusing idea, to plumb the noise generator to the outside of the vehicle, say behind the front bumper :P

wonder what it would sound like

Sportsguy83 · 07-05-2012, 11:40 PM

There is a thread that shows removing the sound generator looses one HP. Just FYI to all people asking if there was any difference.

Edit: Here it is.

http://www.ft86club.com/forums/showthread.php?t=10366

ATL BRZ · 07-05-2012, 11:45 PM

Looks good thanks for the pics and references. Has anyone removed the resonator on the left side of the air box? That could be plugged and more of the engine bay cleaned up.

Swift Racing Technologies · 07-06-2012, 12:32 AM

Which intake system did you have that created the P1071 Code? That is the important question.

That should be addressed as getting that code is NOT a good thing at ALL!!!
P1071 code means the system is running too lean, lean always means bad news coming sooner than later.

brianbot5000 · 07-06-2012, 12:44 AM

Quote:

Originally Posted by xcelir8brz

Cleans up the engine bay & gets rid of the annoying intake rasp (i.e. makes car sound better).

*gasp* The intake rasp sounds great! But great solution if you're into the quiet thing.

xcelir8brz · 07-06-2012, 12:48 AM

I cant see how it would lose HP. It doesn't go into intake manifold but rather dead ends.

Sent from my Galaxy Nexus using Tapatalk 2

xcelir8brz · 07-06-2012, 12:49 AM

Tomorrows project.

Sent from my Galaxy Nexus using Tapatalk 2

07-05-2012, 09:26 PM	#1
xcelir8brz Senior Member Join Date: Jun 2012 Drives: 2013 BRZ Limited Location: Earth Posts: 1,029 Thanks: 45 Thanked 235 Times in 157 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Noise Generator Delete for $10.00 All - Since it is a 104F degree heat as well as high humidity here in Illinois, I had to replace my aftermarket intake back to stock due to receiving P1071 A/F codes because of the humidity. Instead of re-installing the noise generator with the stock intake, I put together my own delete from a few parts I picked up at Autozone for less than $10.00. The fruits of my labor are shown in pictures below:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Is this idle noise normal?	robo_robb	Engine, Exhaust, Transmission	288	01-25-2022 10:40 AM
Removing and Replacing BRZ/FR-S Intake, Air Filter and Noise Generator Delete	GrimmSpeed	DIY (Do-It-Yourself) Guides	99	01-25-2015 02:24 AM
rattling noise in the trunk	ayetothejay	Scion FR-S / Toyota 86 GT86 General Forum	2	06-27-2012 12:19 AM
HID noise	Carlsbad	BRZ First-Gen (2012+) — General Topics	6	06-20-2012 01:39 AM
Strange noise	Random_Art	Other Vehicles & General Automotive Discussions	15	06-03-2011 04:31 PM

07-05-2012, 09:59 PM	#2
Sall Sallbaru Join Date: Dec 2011 Drives: raven FRS Location: socal Posts: 335 Thanks: 234 Thanked 60 Times in 36 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	sorry but im such a noob... does this mod makes your car sound better run smoother or whats the benefit >?

07-05-2012, 10:00 PM	#3
xcelir8brz Senior Member Join Date: Jun 2012 Drives: 2013 BRZ Limited Location: Earth Posts: 1,029 Thanks: 45 Thanked 235 Times in 157 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Cleans up the engine bay & gets rid of the annoying intake rasp (i.e. makes car sound better).

07-05-2012, 10:50 PM	#6
TrickyFrenchman Member Join Date: Jun 2012 Drives: 2013 FR-S Location: Nashville Posts: 74 Thanks: 17 Thanked 32 Times in 20 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	What did you do for the other end, near the firewall or at the firewall?

07-05-2012, 11:04 PM	#8
JiB * Join Date: May 2012 Drives: GT86 Location: Sydney Posts: 845 Thanks: 525 Thanked 266 Times in 144 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	had an amusing idea, to plumb the noise generator to the outside of the vehicle, say behind the front bumper :P wonder what it would sound like

07-05-2012, 11:45 PM	#10
ATL BRZ TEQSPORT Brand Manager Join Date: Jun 2012 Drives: '24 GR86 + '16 FR-S Location: Atlanta Posts: 3,666 Thanks: 3,725 Thanked 4,137 Times in 1,707 Posts Mentioned: 90 Post(s) Tagged: 6 Thread(s)	Looks good thanks for the pics and references. Has anyone removed the resonator on the left side of the air box? That could be plugged and more of the engine bay cleaned up.

07-06-2012, 12:32 AM	#11
Swift Racing Technologies Join Date: Jun 2012 Drives: 2013 Scion FR-S Location: Boostville, MD Posts: 149 Thanks: 126 Thanked 321 Times in 78 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Which intake system did you have that created the P1071 Code? That is the important question. That should be addressed as getting that code is NOT a good thing at ALL!!! P1071 code means the system is running too lean, lean always means bad news coming sooner than later.

07-06-2012, 12:48 AM	#13
xcelir8brz Senior Member Join Date: Jun 2012 Drives: 2013 BRZ Limited Location: Earth Posts: 1,029 Thanks: 45 Thanked 235 Times in 157 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	I cant see how it would lose HP. It doesn't go into intake manifold but rather dead ends. Sent from my Galaxy Nexus using Tapatalk 2

07-06-2012, 12:49 AM	#14
xcelir8brz Senior Member Join Date: Jun 2012 Drives: 2013 BRZ Limited Location: Earth Posts: 1,029 Thanks: 45 Thanked 235 Times in 157 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Tomorrows project. Sent from my Galaxy Nexus using Tapatalk 2

User Name		Remember Me?
Password