Calculate torque when using a crows foot on torque wrench

[BirdTRD]

Originally Posted by CoupedUpSubie

With a crow foot. You should also calculate the actual torque as a crows foot adds some length to the torque wrench.

Crows foot:
http://www.craftsman.com/craftsman-1...1&blockType=G1

Link to calculate new torque:
http://www.engineersedge.com/manufac...e_wrench_1.htm

A crows foot can come in really useful at times, you will know when to grab it.

Thanks to a post by @CoupedUpSubie in the DIY Alignment thread by @FRSFirestorm.....Pic for the lazy. The web site has a calculator if you suck at math!