Any OFT300 users? Chime in please. - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

sirsol66 · 06-13-2015, 04:46 PM

I've been eyeballing the OFT300 package (OFH, OFT, Vortech S/C) for a while and ready to pull the trigger since Vishnu doesn't seem to be making any progress on the OFT350 package.

I was curious to know any feedback from actual users (or anyone that runs an OFT with the Vortech). How was the tune? Any knocking issues?

Are you happy with your purchase? Any feedback is greatly appreciated.

raven1231 · 06-13-2015, 04:49 PM

Oft350 is done theyre just waiting on parts. All it is though is the Sbd kit with a bigger maf and wastegate spring so it can run 300 hp. Needs individual tuning though, no ots tunes

sirsol66 · 06-13-2015, 05:53 PM

Ah, good to know, thanks. I may end up going that route but I prefer the S/C powerband more than a turbo one. Plus I've only owned turbo cars so I'm wanting to try an S/C.

Any feedback on the OFT300 package?

Boofneenee · 06-13-2015, 10:44 PM

Quote:

Originally Posted by sirsol66

Ah, good to know, thanks. I may end up going that route but I prefer the S/C powerband more than a turbo one. Plus I've only owned turbo cars so I'm wanting to try an S/C.

Any feedback on the OFT300 package?

Yea . get the Jackson sc

Shiv@Openflash · 06-13-2015, 10:52 PM

Quote:

Originally Posted by raven1231

Oft350 is done theyre just waiting on parts. All it is though is the Sbd kit with a bigger maf and wastegate spring so it can run 300 hp. Needs individual tuning though, no ots tunes

This isn't accurate.

raven1231 · 06-13-2015, 10:53 PM

Quote:

Originally Posted by Shiv@Openflash

This isn't accurate.

That's what Chris Riggs posted on his SBD facebook page.

Shiv@Openflash · 06-13-2015, 10:55 PM

Quote:

Originally Posted by raven1231

That's what Chris Riggs posted on his SBD facebook page.

Then Chris Riggs shouldn't post inaccurate information.

raven1231 · 06-13-2015, 11:10 PM

Quote:

Originally Posted by Shiv@Openflash

Then Chris Riggs shouldn't post inaccurate information.

I could be misinterpreting it and if so Im sorry

phrosty · 06-14-2015, 01:01 AM

Quote:

Originally Posted by raven1231

I could be misinterpreting it and if so Im sorry

He's talking about the MAF housing, not the MAF itself.

raven1231 · 06-14-2015, 02:04 AM

Quote:

Originally Posted by phrosty

He's talking about the MAF housing, not the MAF itself.

Ahh I see. My bad guys!

Shiv@Openflash · 06-14-2015, 05:57 AM

Quote:

Originally Posted by raven1231

Ahh I see. My bad guys!

No worries. There are also a few more components to the kit than a MAF housing and WG actuator (which is different from a spring btw).

Urmyson · 06-14-2015, 11:53 AM

So does the kit need a remote tune? Is that included in the OFT350?

sirsol66 · 06-14-2015, 03:10 PM

Quote:

Originally Posted by Shiv@Openflash

No worries. There are also a few more components to the kit than a MAF housing and WG actuator (which is different from a spring btw).

Shiv do you guys have a ballpark time you'll have this launched? My 13 FR-S has the OFH/OFT setup and I was planning on adding the vortech to it. I'm planning a build for my 14 as well over the winter when they're both sitting and am considering a turbo kit, with the OFT350 being near the top of that list. Thanks

dstrout · 06-23-2015, 05:05 AM

It seems like every OFT300 thread goes straight to "The OFT350 is about to ship any day". Going back to the OP's question, does anyone have an OFT 300 and if so, any comments on it?

06-13-2015, 04:46 PM	#1
sirsol66 Senior Member Join Date: Apr 2013 Drives: 2013 FRS- Hot Lava Location: Michigan Posts: 674 Thanks: 16 Thanked 162 Times in 115 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Any OFT300 users? Chime in please. I've been eyeballing the OFT300 package (OFH, OFT, Vortech S/C) for a while and ready to pull the trigger since Vishnu doesn't seem to be making any progress on the OFT350 package. I was curious to know any feedback from actual users (or anyone that runs an OFT with the Vortech). How was the tune? Any knocking issues? Are you happy with your purchase? Any feedback is greatly appreciated.

06-13-2015, 04:49 PM	#2
raven1231 Senior Member Join Date: Aug 2013 Drives: 2013 Firestorm FR-S, 2016 DGM WRX Location: Cincinnati, Ohio Posts: 4,580 Thanks: 8,264 Thanked 3,118 Times in 1,667 Posts Mentioned: 24 Post(s) Tagged: 1 Thread(s)	Oft350 is done theyre just waiting on parts. All it is though is the Sbd kit with a bigger maf and wastegate spring so it can run 300 hp. Needs individual tuning though, no ots tunes __________________ http://www.ft86club.com/forums/showthread.php?t=59870

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oil consumption? Please chime in	OnTheFence	Issues \| Warranty \| Recalls / TSB	48	10-01-2019 09:42 PM
Introducing OFT300	Shiv@Openflash	Forced Induction	285	03-24-2016 05:16 PM
Vortech SC + Vishnu OFT300 power package	Garrett@Openflash	Forced Induction	22	03-15-2016 01:04 PM
Start-up welcome chime	Tan	Electronics \| Audio \| NAV \| Infotainment	1	12-07-2014 11:09 PM
Buying OFT300 a couple ??	Liquid6	Forced Induction	17	10-13-2014 07:51 PM

06-13-2015, 05:53 PM	#3
sirsol66 Senior Member Join Date: Apr 2013 Drives: 2013 FRS- Hot Lava Location: Michigan Posts: 674 Thanks: 16 Thanked 162 Times in 115 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Ah, good to know, thanks. I may end up going that route but I prefer the S/C powerband more than a turbo one. Plus I've only owned turbo cars so I'm wanting to try an S/C. Any feedback on the OFT300 package?

06-14-2015, 11:53 AM	#12
Urmyson Senior Member Join Date: Aug 2013 Drives: BRZ Location: FL Posts: 191 Thanks: 12 Thanked 45 Times in 28 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	So does the kit need a remote tune? Is that included in the OFT350?

06-23-2015, 05:05 AM	#14
dstrout Member Join Date: Jun 2015 Drives: 2013 BRZ Location: Annapolis, MD Posts: 82 Thanks: 18 Thanked 13 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	It seems like every OFT300 thread goes straight to "The OFT350 is about to ship any day". Going back to the OP's question, does anyone have an OFT *300* and if so, any comments on it?

User Name		Remember Me?
Password