Genome Tuning Carbon Fiber Splitter - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

genometuning · 10-23-2014, 02:12 AM

Hey guys we are working on a new splitter for the FRS/BRZ platform. We are aiming for a price point of $380 including all the hardware and support rods (provided by APR) as well as a template for drilling locations. We will be doing a Group Buy for the first 10 at $340 shipped! Will release info very soon

Here is a picture of it installed what do you guys think?

IceFyre13th · 10-23-2014, 03:07 PM

Nice, and a halfway decent price too......I'm in.

JohnJuan · 10-23-2014, 03:07 PM

Neat! What's it made from? What do the supports connect to? It won't bend, right?

skyloran · 10-23-2014, 03:15 PM

where is this made? material?

genometuning · 10-24-2014, 04:07 PM

Quote:

Originally Posted by JohnJuan

Neat! What's it made from? What do the supports connect to? It won't bend, right?

The splitter is made from carbon fiber with a fiberglass bottom to take the beating from scraps. The support rods can attach to the chassis, but we have it attached to the grill and had no bending issues. Also the support rods we used are APR rods.

genometuning · 10-24-2014, 04:07 PM

Quote:

Originally Posted by skyloran

where is this made? material?

This is made in California, USA!

mike the snake · 10-24-2014, 10:56 PM

Does this splitter replace or cover all the under-plastic pieces that are held on with push clips?

My front end, like many others, is not lining up properly at the bumper/fender junction, and I think this is partly because when the shop installed my turbo kit, they took ALL the front end pieces off, and IME they never go back exactly how they're supposed to, and this is causing misalignment of my bumper and front inner plastic wheel well.

I'd like to remove all that crap and just run a splitter like this.

Liehtw8 · 10-25-2014, 12:26 AM

Would like to see a couple more pics, but very interested

limitedblkwrx · 10-26-2014, 05:34 AM

Quote:

Originally Posted by genometuning

Hey guys we are working on a new splitter for the FRS/BRZ platform. We are aiming for a price point of $350 including all the hardware and support rods (provided by APR) as well as a template for drilling locations. We will be doing a Group Buy for the first 10 at $300! Will release info very soon

Here is a picture of it installed what do you guys think?

Looks good, you guys have a release date yet?

woode · 10-26-2014, 05:37 AM

$300 shipped? If so, I'm in.

I see you updated to $340..

More pictures? Is it pre drilled? Hardware?

genometuning · 10-27-2014, 08:29 PM

Quote:

Originally Posted by woode

$300 shipped? If so, I'm in.

I see you updated to $340..

More pictures? Is it pre drilled? Hardware?

Yup $300 is before shipping and $340 is shipped! If you want to pick it up for the first 10 sets I can do $300. It comes with all the hardware and APR rods. It is not pre-drilled but it will be marked with holes for recommended drill points.

caffeinejunky · 11-03-2014, 02:51 AM

Any more info on this? I'm interested in picking these up. So they're rebranded apr splitters?

DAEMANO · 11-03-2014, 03:16 AM

In for more info as well. I could pickup.

genometuning · 11-03-2014, 07:10 PM

Hey guys what kind of information are you looking for? The splitter is manufactured and designed in southern california with high quality material. We are utilizing the APR splitter rods as part of the hardware kit, rather than use some cheap ebay splitter rods. The splitter covers majority of the bottom of the bumper, however there is a cut in the middle to allow for one of the center panels to fit without being removed. If you guys have any questions feel free to ask me! We are doing a GB and can provide local pick up, email me to be added to the list

10-23-2014, 02:12 AM	#1
genometuning Join Date: Jun 2012 Drives: Scion FR-S Location: Los Angeles, California Posts: 2,807 Thanks: 616 Thanked 250 Times in 135 Posts Mentioned: 56 Post(s) Tagged: 0 Thread(s)	Genome Tuning Carbon Fiber Splitter Hey guys we are working on a new splitter for the FRS/BRZ platform. We are aiming for a price point of $380 including all the hardware and support rods (provided by APR) as well as a template for drilling locations. We will be doing a Group Buy for the first 10 at $340 shipped! Will release info very soon Here is a picture of it installed what do you guys think? Last edited by genometuning; 10-26-2014 at 07:14 PM.

10-23-2014, 03:07 PM	#2
IceFyre13th Senior Member Join Date: Jun 2013 Drives: Mazdarati Location: Arizona Posts: 1,238 Thanks: 608 Thanked 1,369 Times in 675 Posts Mentioned: 8 Post(s) Tagged: 1 Thread(s)	Nice, and a halfway decent price too......I'm in. __________________ It's only impossible if you stop to think about it.

10-23-2014, 03:15 PM	#4
skyloran Honeydew old ID Join Date: May 2014 Drives: GT86 Location: California Posts: 222 Thanks: 7 Thanked 43 Times in 33 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	where is this made? material? __________________ Used to owned M3 and Lotus, but love my GT86 the most.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Genome Tuning	Squishy86	User/Vendor/Sponsor Reviews, Feedback, Comments	5	04-24-2015 05:04 PM
Genome Tuning	phobos512	User/Vendor/Sponsor Reviews, Feedback, Comments	3	06-11-2014 07:29 PM
Genome Tuning Aero Kit what do yall think??	genometuning	Cosmetic Modification (Interior/Exterior/Lighting)	38	08-18-2013 05:02 PM
APR Carbon Fiber Front Wind Splitter now available	GuerillaRacing	Exterior Parts - The Rest	65	03-27-2013 12:36 PM

10-24-2014, 10:56 PM	#7
mike the snake Senior Member Join Date: Jul 2013 Drives: 2013 BRZ Location: Norcal Posts: 1,592 Thanks: 1 Thanked 623 Times in 378 Posts Mentioned: 15 Post(s) Tagged: 0 Thread(s)	Does this splitter replace or cover all the under-plastic pieces that are held on with push clips? My front end, like many others, is not lining up properly at the bumper/fender junction, and I think this is partly because when the shop installed my turbo kit, they took ALL the front end pieces off, and IME they never go back exactly how they're supposed to, and this is causing misalignment of my bumper and front inner plastic wheel well. I'd like to remove all that crap and just run a splitter like this.

10-25-2014, 12:26 AM	#8
Liehtw8 Member Join Date: Jan 2013 Drives: 2022 Toyota GR86 Location: Northern Alberta Posts: 62 Thanks: 17 Thanked 36 Times in 19 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Would like to see a couple more pics, but very interested

11-03-2014, 07:10 PM	#14
genometuning Join Date: Jun 2012 Drives: Scion FR-S Location: Los Angeles, California Posts: 2,807 Thanks: 616 Thanked 250 Times in 135 Posts Mentioned: 56 Post(s) Tagged: 0 Thread(s)	Hey guys what kind of information are you looking for? The splitter is manufactured and designed in southern california with high quality material. We are utilizing the APR splitter rods as part of the hardware kit, rather than use some cheap ebay splitter rods. The splitter covers majority of the bottom of the bumper, however there is a cut in the middle to allow for one of the center panels to fit without being removed. If you guys have any questions feel free to ask me! We are doing a GB and can provide local pick up, email me to be added to the list

User Name		Remember Me?
Password