Lenso Venom

[Adrenaline]

Hi Guys
I really like these wheels but they come only with 5x114.3 setup so I would need to use a spacer. They are available with different offset and sizes

MODEL : VENOM2-HIGH

17x7.5 ET : +42 PCD : 4x100
17x7.5 ET : +42 PCD : 5x114.3
17x8.0 ET : +43 PCD : 5x114.3
18x8.0 ET : +45 PCD : 5x114.3

MODEL : VENOM2-MEDIUM

17x9.0 ET : +35 PCD : 5x114.3
18x8.0 ET : +45 PCD : 5x114.3
18x8.5 ET : +45 PCD : 5x114.3
18x9.0 ET : +40 PCD : 5x114.3
18x9.5 ET : +25 PCD : 5x114.3

MODEL : VENOM2-LOW

17x10.0 ET : +15 PCD : 5x114.3
18x10.5 ET : +12 PCD : 5x114.3

Ideally I would like to go with 18 inch wheel but I am not sure what width of the wheel I could use as I would need the spacer with conversion to 5x100.
I would like the wheel to be flushed. I am currently lowered on BC coilovers.

I would like to ask for help in regards to spacer size and width of the wheel.

Big Thanks

[Yamajee]

I'm not quite sure with Lenso but I tried BBS RS replicas with these specs (18x9.5 +30) and 5x114.3 to 5x100 conversion 25MM spacers and this is how it sticked out:



If you're planning to do this the right way without running outrageous negative camber, look for 5x100s otherwise, look for the lowest size for the spacers and don't go over 8.5" width.

[dori.]

why not just get torques/cr ultimates?

[Adrenaline]

Thanks guys.




Sent from my RM-821_eu_poland_325 using Tapatalk