![]() |
Lenso Venom
http://s14.postimg.org/uvezvbubx/gt86.jpg
Hi Guys I really like these wheels but they come only with 5x114.3 setup so I would need to use a spacer. They are available with different offset and sizes MODEL : VENOM2-HIGH 17x7.5 ET : +42 PCD : 4x100 17x7.5 ET : +42 PCD : 5x114.3 17x8.0 ET : +43 PCD : 5x114.3 18x8.0 ET : +45 PCD : 5x114.3 MODEL : VENOM2-MEDIUM 17x9.0 ET : +35 PCD : 5x114.3 18x8.0 ET : +45 PCD : 5x114.3 18x8.5 ET : +45 PCD : 5x114.3 18x9.0 ET : +40 PCD : 5x114.3 18x9.5 ET : +25 PCD : 5x114.3 MODEL : VENOM2-LOW 17x10.0 ET : +15 PCD : 5x114.3 18x10.5 ET : +12 PCD : 5x114.3 Ideally I would like to go with 18 inch wheel but I am not sure what width of the wheel I could use as I would need the spacer with conversion to 5x100. I would like the wheel to be flushed. I am currently lowered on BC coilovers. I would like to ask for help in regards to spacer size and width of the wheel. Big Thanks |
I'm not quite sure with Lenso but I tried BBS RS replicas with these specs (18x9.5 +30) and 5x114.3 to 5x100 conversion 25MM spacers and this is how it sticked out:
http://up.arab-x.com/May12/yps17406.jpg If you're planning to do this the right way without running outrageous negative camber, look for 5x100s otherwise, look for the lowest size for the spacers and don't go over 8.5" width. |
why not just get torques/cr ultimates?
|
Thanks guys.
Sent from my RM-821_eu_poland_325 using Tapatalk |
| All times are GMT -4. The time now is 12:13 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.