FR-S and BRZ Roll Bar Interest Thread!!! - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Corner3garage · 07-31-2013, 06:26 PM

Hi Everyone!

We are seeing if anyone would be interest thread on the FR-S and BRZ Chassis!

At Corner3 Garage we are all about safety as the #1 aspect on track driven cars and drivers that have that same mindset.

We are all about quality and If you have seen our cage work we TIG weld everything out of either Chromoly or DOM mild steel.

With roll bars/cages also come the added benefit of safety and rigidity!

Here are some questions we would like to know!

How would you like to see the Roll bars designed?

What are some interior features you would like to see integrated?(keeping of rear seats? interior paneling? etc...)

Would you buy a roll bar?

How much would you be willing to spend on your personal safety?

Here is some of our past work!

Thanks,
Mike

TylerLieberman · 07-31-2013, 08:13 PM

While a full weld in would be badass, not everybody wants that or has the $$ for that. Not everybody is willing to cut up their dash and rip out half their interior panels either.

I think as far as a bolt in option goes, something like a 6 point dash escape with optional door bars and harness bar would be awesome.

that_guy · 08-01-2013, 10:32 AM

I'd love a simple harness bar/4-point. But I'd love to see something that utilizies factory mounting points, requires no drilling, and doesn't mess with the interior all that much (can delete rear seats if really necessary).

Full cage stuff is a small market and I think most guys go with local builders for that.

Corner3garage · 08-01-2013, 04:48 PM

Quote:

Originally Posted by TylerLieberman

While a full weld in would be badass, not everybody wants that or has the $$ for that. Not everybody is willing to cut up their dash and rip out half their interior panels either.

I think as far as a bolt in option goes, something like a 6 point dash escape with optional door bars and harness bar would be awesome.

We were only thinking of developing a Roll bar for the general public!

Anything that is cage related must be developed custom because everyone has different needs!

-Mike

Corner3garage · 08-01-2013, 04:52 PM

Quote:

Originally Posted by that_guy

I'd love a simple harness bar/4-point. But I'd love to see something that utilizies factory mounting points, requires no drilling, and doesn't mess with the interior all that much (can delete rear seats if really necessary).

Full cage stuff is a small market and I think most guys go with local builders for that.

We dont believe in using rear harness bars.

If we did develop something it would definitely be a 4 point with either an integrated horizontal bar or harness bar!

We are definitely trying to keep interior handy, but we will have to see after prototyping.

Thanks,
Mike

that_guy · 08-02-2013, 08:12 PM

Quote:

Originally Posted by Corner3garage

We dont believe in using rear harness bars.

If we did develop something it would definitely be a 4 point with either an integrated horizontal bar or harness bar!

We are definitely trying to keep interior handy, but we will have to see after prototyping.

Thanks,
Mike

Fair enough. A 4-point would be great. Again, it would be nice to see someone spend a little extra time to find a way of integrating the 4-point around the interior space and/or utilizing factory mounting points.

If your looking for a track tester, I'd be happy to assist

oTaGGeDo · 08-04-2013, 08:22 PM

Quote:

Originally Posted by that_guy

Fair enough. A 4-point would be great. Again, it would be nice to see someone spend a little extra time to find a way of integrating the 4-point around the interior space and/or utilizing factory mounting points.

If your looking for a track tester, I'd be happy to assist

X2 very interested I auto cross monthly

Corner3garage · 09-04-2013, 08:21 PM

We have been seeing a lot more FR-S and BRZ at the track. Who here would consider a roll bar and why? What features would you be looking for in the bar.

aCab · 09-04-2013, 11:46 PM

Id love a bolt in with double diagonals and a lowered harness bar for a stripped out interior car.

jimmy4thenguyen · 09-08-2013, 05:08 PM

4pt w harness bar ftw

TouchMyHonda · 09-08-2013, 05:15 PM

Quote:

Originally Posted by aCab

Id love a bolt in with double diagonals and a lowered harness bar for a stripped out interior car.

This

ImAwesome · 09-11-2013, 01:01 AM

Quote:

Originally Posted by aCab

Id love a bolt in with double diagonals and a lowered harness bar for a stripped out interior car.

Same

suaveflooder · 09-11-2013, 01:32 AM

also interested in a 4 pt. Car is a DD, so I need to keep it as usable as possible

Corner3garage · 09-11-2013, 05:10 PM

Quote:

Originally Posted by suaveflooder

also interested in a 4 pt. Car is a DD, so I need to keep it as usable as possible

We will definitely try to keep that in mind when building something like this, but we won't compromise safety!

07-31-2013, 08:13 PM	#2
TylerLieberman Senior Member Join Date: Dec 2011 Drives: '24 GR86 Location: Arizona Posts: 3,686 Thanks: 658 Thanked 3,363 Times in 1,584 Posts Mentioned: 16 Post(s) Tagged: 0 Thread(s)	While a full weld in would be badass, not everybody wants that or has the $$ for that. Not everybody is willing to cut up their dash and rip out half their interior panels either. I think as far as a bolt in option goes, something like a 6 point dash escape with optional door bars and harness bar would be awesome. __________________ Old 2013 FRS Build Thread (SOLD) Hakone 86 GR Build Thread (SOLD)

08-01-2013, 10:32 AM	#3
that_guy Dances with Cones Join Date: Oct 2012 Drives: 2013 Scion FR-S Raven Location: Barrie, ON Posts: 482 Thanks: 55 Thanked 222 Times in 122 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	I'd love a simple harness bar/4-point. But I'd love to see something that utilizies factory mounting points, requires no drilling, and doesn't mess with the interior all that much (can delete rear seats if really necessary). Full cage stuff is a small market and I think most guys go with local builders for that. __________________ 2013 Scion FR-S - Raven 2011 Scion tC - Cement - SOLD

09-04-2013, 11:46 PM	#9
aCab Senior Member Join Date: Oct 2012 Drives: FR-S & S2k Location: Here Posts: 161 Thanks: 25 Thanked 70 Times in 37 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	Id love a bolt in with double diagonals and a lowered harness bar for a stripped out interior car. __________________ Bilstein Damptronic Prototypes \| Other silly bits

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Roll cage	(Stealth Inc.)	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	37	12-16-2013 12:51 PM
JDM underpanel "group buy" interest thread	mav1178	Southern California	32	07-30-2013 03:39 AM
Fender Roll	Ryaquinn	Cosmetic Modification (Interior/Exterior/Lighting)	9	07-05-2013 06:49 PM
Has anyone actually seen any of the Cusco roll bar / roll cages installed?	xenocharger	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	21	06-03-2013 07:54 PM
Roll stiffness: Springs vs anti-roll bars?	Captain Snooze	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	31	07-24-2012 06:44 PM

07-31-2013, 06:26 PM	#1
Corner3garage Senior Member Join Date: Apr 2013 Drives: FR-S & BRZ Location: Laguna Hills, CA Posts: 2,716 Thanks: 205 Thanked 120 Times in 93 Posts Mentioned: 31 Post(s) Tagged: 0 Thread(s)	FR-S and BRZ Roll Bar Interest Thread!!! Hi Everyone! We are seeing if anyone would be interest thread on the FR-S and BRZ Chassis! At Corner3 Garage we are all about safety as the #1 aspect on track driven cars and drivers that have that same mindset. We are all about quality and If you have seen our cage work we TIG weld everything out of either Chromoly or DOM mild steel. With roll bars/cages also come the added benefit of safety and rigidity! Here are some questions we would like to know! How would you like to see the Roll bars designed? What are some interior features you would like to see integrated?(keeping of rear seats? interior paneling? etc...) Would you buy a roll bar? How much would you be willing to spend on your personal safety? Here is some of our past work! Thanks, Mike

09-04-2013, 08:21 PM	#8
Corner3garage Senior Member Join Date: Apr 2013 Drives: FR-S & BRZ Location: Laguna Hills, CA Posts: 2,716 Thanks: 205 Thanked 120 Times in 93 Posts Mentioned: 31 Post(s) Tagged: 0 Thread(s)	We have been seeing a lot more FR-S and BRZ at the track. Who here would consider a roll bar and why? What features would you be looking for in the bar.

09-08-2013, 05:08 PM	#10
jimmy4thenguyen Senior Member Join Date: May 2013 Drives: Whiteout FRS Location: Chapel Hill NC Posts: 115 Thanks: 46 Thanked 30 Times in 21 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	4pt w harness bar ftw

09-11-2013, 01:32 AM	#13
suaveflooder Senior Member Join Date: Feb 2013 Drives: 2013 FR-S Location: San Diego Posts: 2,295 Thanks: 2,708 Thanked 1,052 Times in 664 Posts Mentioned: 29 Post(s) Tagged: 0 Thread(s)	also interested in a 4 pt. Car is a DD, so I need to keep it as usable as possible

User Name		Remember Me?
Password