Part Number for OEM Scion H11 Foglight Harness - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

FRSHunter · 07-10-2013, 06:36 PM

Anyone happen to know if there is a Part Number for the H11 Foglight Harness in the OEM Scion foglight kit? The harnesses look really well built and would rather just buy those than to look for those female terminal pins and construct my own.

Tofu driver's Fr-s · 07-10-2013, 09:00 PM

Quote:

Originally Posted by FRSHunter

Anyone happen to know if there is a Part Number for the H11 Foglight Harness in the OEM Scion foglight kit? The harnesses look really well built and would rather just buy those than to look for those female terminal pins and construct my own.

I believe the answer is no because the only part number is for the full kit, not individual parts.

FRSfan111 · 07-10-2013, 11:22 PM

All you do is ground it and run te power wire to the empty connector in te stock sidemarker harness.

cdo221 · 07-10-2013, 11:58 PM

Does the OEM Scion fog light kit use H11 bulbs?

I believe the BRZ and GT86 (overseas) both use PSX24W bulbs/plastic housing. I thought the OEM scion fog light upgrade would probably be the same.

I think you gotta get the Subaru Outback Glass Fog Lights for the H11 bulbs (which is the route I went). In this case, Scion wouldn't have any H11 harnesses.

Tofu driver's Fr-s · 07-11-2013, 12:05 AM

Quote:

Originally Posted by cdo221

Does the OEM Scion fog light kit use H11 bulbs?

I believe the BRZ and GT86 (overseas) both use PSX24W bulbs/plastic housing. I thought the OEM scion fog light upgrade would probably be the same.

I think you gotta get the Subaru Outback Glass Fog Lights for the H11 bulbs (which is the route I went). In this case, Scion wouldn't have any H11 harnesses.

Your partially right. The new fog light kit does carry h11 55 watt bulbs and are glass fog lights.
See last two posts on this page.

http://www.ft86club.com/forums/showt...t=40153&page=2

Chillz · 07-11-2013, 11:13 AM

Quote:

Originally Posted by FRSfan111

All you do is ground it and run te power wire to the empty connector in te stock sidemarker harness.

It's simple if you have the materials. I can't seem to find the pin that fits in the empty connector. Suggestions?

Tofu driver's Fr-s · 07-11-2013, 12:37 PM

Quote:

Originally Posted by Chillz

It's simple if you have the materials. I can't seem to find the pin that fits in the empty connector. Suggestions?

For me the best thing was to buy the same connector from toyota and take out 2 of the pins to use, plus you will have spares in case you break one.

FRSfan111 · 07-11-2013, 05:25 PM

Quote:

Originally Posted by Tofu driver's Fr-s

For me the best thing was to buy the same connector from toyota and take out 2 of the pins to use, plus you will have spares in case you break one.

This ^

euroshowoff · 07-12-2013, 08:55 PM

Quote:

Originally Posted by Tofu driver's Fr-s

For me the best thing was to buy the same connector from toyota and take out 2 of the pins to use, plus you will have spares in case you break one.

Do u have the part number u purchased?

Tofu driver's Fr-s · 07-12-2013, 09:05 PM

Quote:

Originally Posted by euroshowoff

Do u have the part number u purchased?

I do but not near it currently, I will be sure to post it sometime tomorrow morning.

Tofu driver's Fr-s · 07-13-2013, 11:23 AM

Quote:

Originally Posted by euroshowoff

Do u have the part number u purchased?

Part # is SU003-02583

tCsonfrs · 07-15-2013, 01:09 AM

Quote:

Originally Posted by Tofu driver's Fr-s

Your partially right. The new fog light kit does carry h11 55 watt bulbs and are glass fog lights.
See last two posts on this page.

http://www.ft86club.com/forums/showt...t=40153&page=2

This is the best news ever!

Ordered my FR-S with the OEM fogs and I thought I was gonna have to deal with finding replacements for those hard to find bulbs.

Tofu driver's Fr-s · 07-15-2013, 10:20 AM

Quote:

Originally Posted by tCsonfrs

This is the best news ever!

Ordered my FR-S with the OEM fogs and I thought I was gonna have to deal with finding replacements for those hard to find bulbs.

Yes you wont have any worries about light quality, although personally I think the "OEM" kit isnt worth the money since its just a button and could easily be done cheaper.

euroshowoff · 07-15-2013, 01:37 PM

Quote:

Originally Posted by Tofu driver's Fr-s

Part # is SU003-02583

last question, did you just need to order 1 and reuse the 2 of the 3 pins for each harness? or do I need to order 1 for each side?

07-10-2013, 06:36 PM	#1
FRSHunter Senior Member Join Date: Nov 2012 Drives: Asphalt FRS Location: Hawaii Posts: 354 Thanks: 11 Thanked 215 Times in 64 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Part Number for OEM Scion H11 Foglight Harness Anyone happen to know if there is a Part Number for the H11 Foglight Harness in the OEM Scion foglight kit? The harnesses look really well built and would rather just buy those than to look for those female terminal pins and construct my own.

07-10-2013, 11:22 PM	#3
FRSfan111 Sideways and smiling! Join Date: Jan 2012 Drives: First 86 FRS 5/8/2012 (second US) Location: Oregon Posts: 941 Thanks: 17 Thanked 273 Times in 179 Posts Mentioned: 15 Post(s) Tagged: 0 Thread(s)	All you do is ground it and run te power wire to the empty connector in te stock sidemarker harness. __________________ My build http://www.ft86club.com/forums/showt...08#post1283608

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Canadian BRZ owers, do you have this Harness for the radio you want to part with?	Kayzer Soze	CANADA	10	10-03-2013 02:26 PM
need a part number	the Red Devil	Scion FR-S / Toyota 86 GT86 General Forum	0	12-12-2012 01:42 PM
I need a part number	Bones36	Cosmetic Modification (Interior/Exterior/Lighting)	0	09-01-2012 06:25 PM
Part Number for this	DriftEightSix	AUSTRALIA	20	06-25-2012 09:30 PM
Scion Badge Part Number	SEC	Exterior Parts - The Rest	1	06-10-2012 04:43 PM

07-10-2013, 11:58 PM	#4
cdo221 Senior Member Join Date: Nov 2012 Drives: 2013 Ultramarine FR-S, 2015 RS 1.0 Location: SF Bay Area Posts: 532 Thanks: 285 Thanked 174 Times in 110 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	Does the OEM Scion fog light kit use H11 bulbs? I believe the BRZ and GT86 (overseas) both use PSX24W bulbs/plastic housing. I thought the OEM scion fog light upgrade would probably be the same. I think you gotta get the Subaru Outback Glass Fog Lights for the H11 bulbs (which is the route I went). In this case, Scion wouldn't have any H11 harnesses.

User Name		Remember Me?
Password