Invidia Down Pipe on Perrin Cat Back - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

stu_dw · 07-09-2013, 04:41 AM

Hi Guys,

Anyway I have an 86 currenntly running a Perrin 2.5inch cat back and I'm upgrading the headers, overpipe and front pipe soon. Basically I've been offered a new Invidia catted front pipe for a bargain price (which is pretty rare in Australia!) so I'm keen to throw it on. My only concern is that the front pipe wont meet up with the mid pipe properly. I mean they're both designed to join up with the stock system, but I dunno if there could be something bizarre going on with the flanges or bolt/nut sizes that could suddenly cause an issue.

Anyone had any experience mounting up different exhausts? Sorry if this has been covered before, I searched and searched without any luck.

midnight23 · 07-09-2013, 04:47 AM

they should mount up fine, i'm running borla uel header > perrin overpipe > invidia front pipe > invidia q300 and everything bolted up without issues.

stu_dw · 07-09-2013, 05:01 AM

Awesome thanks for the reply mate.

mweidner311 · 04-24-2014, 11:14 AM

I needed to know the same thing thank you. I bought the car with a Perrin Cat back already on it I would like to add the non cated resonated front pipe to it. Though it shouldn't be a problem but thanks for confirming!

Cheers!

Andreas83 · 04-24-2014, 11:34 AM

I am running stock header, perrin overpipe, invidia catted front pipe and a resonated 2,5" perrin catback.
Mounts up with no issues.

07-09-2013, 04:41 AM	#1
stu_dw Member Join Date: Feb 2013 Drives: Toyota 86 Location: Brisbane, Australia Posts: 10 Thanks: 0 Thanked 8 Times in 5 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Invidia Down Pipe on Perrin Cat Back Hi Guys, Anyway I have an 86 currenntly running a Perrin 2.5inch cat back and I'm upgrading the headers, overpipe and front pipe soon. Basically I've been offered a new Invidia catted front pipe for a bargain price (which is pretty rare in Australia!) so I'm keen to throw it on. My only concern is that the front pipe wont meet up with the mid pipe properly. I mean they're both designed to join up with the stock system, but I dunno if there could be something bizarre going on with the flanges or bolt/nut sizes that could suddenly cause an issue. Anyone had any experience mounting up different exhausts? Sorry if this has been covered before, I searched and searched without any luck.

07-09-2013, 04:47 AM	#2
midnight23 dying bird under the hood Join Date: Mar 2013 Drives: 2013 SWP Limited BRZ Location: Disneyland, California Posts: 1,331 Thanks: 546 Thanked 451 Times in 295 Posts Mentioned: 34 Post(s) Tagged: 0 Thread(s)	they should mount up fine, i'm running borla uel header > perrin overpipe > invidia front pipe > invidia q300 and everything bolted up without issues. __________________ GReddy Turbo BRZ tuned by Evasive Motorsports Build Thread Instagram

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Perrin or Invidia Catted Front Pipe?	husker741	Engine, Exhaust, Transmission	30	08-24-2017 01:26 PM
Anyone keen to swap their Perrin Unresonated mid pipe for a Perrin resonated one?	Jigga	Australia Classifieds	0	07-07-2013 01:35 AM
FS: Invidia Q300 & Invidia Front Pipe	DR1FT	Engine, Exhaust, Bolt-Ons	15	06-07-2013 08:29 PM
Possible trade? Nameless axle-back for Perrin Resonated Cat-back	GTB/ZR-1	Engine, Exhaust, Bolt-Ons	0	03-26-2013 02:51 PM

07-09-2013, 05:01 AM	#3
stu_dw Member Join Date: Feb 2013 Drives: Toyota 86 Location: Brisbane, Australia Posts: 10 Thanks: 0 Thanked 8 Times in 5 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Awesome thanks for the reply mate.

04-24-2014, 11:34 AM	#5
Andreas83 Senior Member Join Date: Oct 2013 Drives: 2013 Subaru BRZ Location: Norway Posts: 111 Thanks: 29 Thanked 85 Times in 46 Posts Mentioned: 3 Post(s) Tagged: 1 Thread(s)	I am running stock header, perrin overpipe, invidia catted front pipe and a resonated 2,5" perrin catback. Mounts up with no issues.

User Name		Remember Me?
Password