Zerg Industries Carbon Fiber Interior and Exterior Trim - Installed Photos - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

FT-86 SpeedFactory · 07-08-2013, 09:45 PM

Hey Everyone!

We recently picked up a new line from Zerg Industries and got some of their offerings in-house for us to check out. We didn't want to keep these to ourselves, so we wanted to share with you what we think and how they look.

Zerg offers the FR-S and BRZ some great looking carbon fiber accents for the interior and exterior of your car. These little touches will be sure to set your car apart. They offer carbon shifter trims, steering wheel trims, AC vent trims, door handle trims, fender inserts, and a trunk garnish. All available in a glossy finish or a matte finish to suit your tastes, accordingly.

These are thin, hand-made carbon pieces that are installed using adhesive that is already applied for you. You simply "peel and stick". They are easy to apply and the finish looked great on all the pieces we got in-house. Most of the pieces you see here were perfect fitment. The only issue we had was with the shifter trim piece, and it was a bit tight around the traction control and VSC sport buttons. It was not a huge issue and these are hand-made, so you could run into some variances that might require you to trim down a bit of the carbon to make it fit 100%.

All in all, these are a great product offering. Once we get some matte interior pieces in-house, we think we will be installing those on our own cars(our tastes prefer the matte)

Enough talk. Onto the photos

AC Trim Pieces

Comparison shots

Door Handle Trim

Comparison Shots

Steering Wheel Trim

Shifter Trim

Interior Shots(Gloss was all we had in-house for all the interior pieces)

Exterior Stuff

No install pics of the exterior stuff right now, but we will probably get around to it sometime.

cdo221 · 07-09-2013, 09:10 PM

When you say 'peel n stick', do you mean these are essentially overlays on top of the existing OEM trim pieces? No removal of the trim pieces.

Just confirming since I know the exterior vent piece is held on by some clips + adhesive tape... so this goes on top of the vent piece. Not 'peel off the OEM vent, then stick the new exterior piece as a full replacement'

FT-86 SpeedFactory · 07-10-2013, 12:45 AM

Quote:

Originally Posted by cdo221

When you say 'peel n stick', do you mean these are essentially overlays on top of the existing OEM trim pieces? No removal of the trim pieces.

Just confirming since I know the exterior vent piece is held on by some clips + adhesive tape... so this goes on top of the vent piece. Not 'peel off the OEM vent, then stick the new exterior piece as a full replacement'

Correct these are all overlays. They sit on top of the OEM parts.

Chee-Hu · 07-10-2013, 02:03 PM

Are you able to share prices on these? These are great for those wanting to get rid of the silver trims.

Minovsky · 07-10-2013, 11:34 PM

are these actual carbon fibre? Would i be able to get a discounted price if i get all the interior parts at once? What about the dash piece would you be selling those as well?

FT-86 SpeedFactory · 07-11-2013, 12:22 AM

Quote:

Originally Posted by Honeydew

are these actual carbon fibre? Would i be able to get a discounted price if i get all the interior parts at once? What about the dash piece would you be selling those as well?

Yes real carbon fiber in either gloss or matte.

Muaddib · 07-11-2013, 12:42 AM

No hydra don't care.

chadstyle · 07-11-2013, 12:46 AM

Pricing for set? No radio/dash trim? What about the two pieces on either side of the AC controls (vertical silver trim)??

Would really like a complete set to replace all the silver BRZ plastics in real CF.

DoomsdayJesus · 07-11-2013, 05:26 PM

These look gorgeous, but I'd really like to replace the trim, not just cover it up.

FT-86 SpeedFactory · 07-11-2013, 06:00 PM

Quote:

Originally Posted by DoomsdayJesus

These look gorgeous, but I'd really like to replace the trim, not just cover it up.

Yeah I hear ya but then cost would be double to triple then too.

supra2nv · 07-14-2013, 06:40 AM

Quote:

Originally Posted by FT-86 SpeedFactory

Yeah I hear ya but then cost would be double to triple then too.

Well can they make a matte set for me?

MadFRS · 07-27-2013, 10:13 PM

@FT-86 SpeedFactory, just got the carbon fiber fender inserts installed and they are awesome. When it stops raining and I have a chance to wash the car up and take some shots, I will post them up here. A crappy underground parking iPhone shot will have to do for now.

They look great on, but I was nervous about just the adhesive tape, so I added a small amount of adhesive on the inserts themselves. Hopefully they stay on!!

Here's a teaser pic for now.

EDIT: Glossy Carbon

jthornton1993 · 07-27-2013, 10:35 PM

marking

TRD_86 · 07-27-2013, 11:18 PM

Good, but why did they replace all the silver piece? Can someone tell the aftermarket people to make something nice to replace ALL dull black plastic pieces in the car ?

1) The center plastic piece at the thermostat/fan 3-knobs. (The most ugly pieces right in the face)

2) A better nicer carbon look to upgrade the front dash board to all around the stereo HU.

3) Need a nicer piece on both door at the power window buttons.

Need these pieces trim has the design quality look like the Lexus, BMW & Mercedes which called like Anthracite wood, charcoal or black bird eyes.

07-08-2013, 09:45 PM	#1
FT-86 SpeedFactory Join Date: Jul 2012 Drives: 2013 Scion FR-S Location: Des Moines, IA Posts: 7,694 Thanks: 1,298 Thanked 3,579 Times in 1,253 Posts Mentioned: 341 Post(s) Tagged: 5 Thread(s)	Zerg Industries Carbon Fiber Interior and Exterior Trim - Installed Photos Hey Everyone! We recently picked up a new line from Zerg Industries and got some of their offerings in-house for us to check out. We didn't want to keep these to ourselves, so we wanted to share with you what we think and how they look. Zerg offers the FR-S and BRZ some great looking carbon fiber accents for the interior and exterior of your car. These little touches will be sure to set your car apart. They offer carbon shifter trims, steering wheel trims, AC vent trims, door handle trims, fender inserts, and a trunk garnish. All available in a glossy finish or a matte finish to suit your tastes, accordingly. These are thin, hand-made carbon pieces that are installed using adhesive that is already applied for you. You simply "peel and stick". They are easy to apply and the finish looked great on all the pieces we got in-house. Most of the pieces you see here were perfect fitment. The only issue we had was with the shifter trim piece, and it was a bit tight around the traction control and VSC sport buttons. It was not a huge issue and these are hand-made, so you could run into some variances that might require you to trim down a bit of the carbon to make it fit 100%. All in all, these are a great product offering. Once we get some matte interior pieces in-house, we think we will be installing those on our own cars(our tastes prefer the matte) Enough talk. Onto the photos AC Trim Pieces Comparison shots Door Handle Trim Comparison Shots Steering Wheel Trim Shifter Trim Interior Shots(Gloss was all we had in-house for all the interior pieces) Exterior Stuff No install pics of the exterior stuff right now, but we will probably get around to it sometime.

07-11-2013, 12:46 AM	#8
chadstyle Senior Member Join Date: Oct 2012 Drives: 2013 Subaru BR-Z Limited Location: Fort Lauderdale, Florida Posts: 883 Thanks: 407 Thanked 562 Times in 294 Posts Mentioned: 42 Post(s) Tagged: 4 Thread(s)	Pricing for set? No radio/dash trim? What about the two pieces on either side of the AC controls (vertical silver trim)?? Would really like a complete set to replace all the silver BRZ plastics in real CF. __________________ ChadStyle's Build

07-27-2013, 10:13 PM	#12
MadFRS Senior Member Join Date: Mar 2013 Drives: UltraMarine FR-S Location: Madison, WI Posts: 170 Thanks: 170 Thanked 70 Times in 46 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	@FT-86 SpeedFactory, just got the carbon fiber fender inserts installed and they are awesome. When it stops raining and I have a chance to wash the car up and take some shots, I will post them up here. A crappy underground parking iPhone shot will have to do for now. They look great on, but I was nervous about just the adhesive tape, so I added a small amount of adhesive on the inserts themselves. Hopefully they stay on!! Here's a teaser pic for now. EDIT: Glossy Carbon __________________ She's Gone.... Flickr Page

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carbon Fiber dash like a BMW? (pictures of M3 carbon fiber interior included)	master345	Cosmetic Modification (Interior/Exterior/Lighting)	56	05-04-2014 12:10 PM
DCW Carbon Fiber interior items! Center console Plaques / Interior panels	doggy	Interior Parts (Incl. Lighting)	143	10-11-2013 12:17 PM
Carbon fiber dash trim	BRZED	Cosmetic Modification (Interior/Exterior/Lighting)	24	05-24-2013 09:16 PM
Carbon Fiber Interior and Exterior	hanstperez	Cosmetic Modification (Interior/Exterior/Lighting)	10	04-25-2013 06:12 AM
APR Perfromance Scion FR-S carbon fiber aero parts installed photos!	vividracing	Cosmetic Modification (Interior/Exterior/Lighting)	30	01-20-2013 07:09 AM

07-09-2013, 09:10 PM	#2
cdo221 Senior Member Join Date: Nov 2012 Drives: 2013 Ultramarine FR-S, 2015 RS 1.0 Location: SF Bay Area Posts: 532 Thanks: 285 Thanked 174 Times in 110 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	When you say 'peel n stick', do you mean these are essentially overlays on top of the existing OEM trim pieces? No removal of the trim pieces. Just confirming since I know the exterior vent piece is held on by some clips + adhesive tape... so this goes on top of the vent piece. Not 'peel off the OEM vent, then stick the new exterior piece as a full replacement'

07-10-2013, 02:03 PM	#4
Chee-Hu Senior Member Join Date: May 2012 Drives: BRZ Location: Elk Grove, CA Posts: 964 Thanks: 360 Thanked 323 Times in 221 Posts Mentioned: 12 Post(s) Tagged: 0 Thread(s)	Are you able to share prices on these? These are great for those wanting to get rid of the silver trims.

07-10-2013, 11:34 PM	#5
Minovsky Senior Member Join Date: May 2012 Drives: Fr-s 2013 white out Location: canada Posts: 843 Thanks: 559 Thanked 111 Times in 96 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	are these actual carbon fibre? Would i be able to get a discounted price if i get all the interior parts at once? What about the dash piece would you be selling those as well?

07-11-2013, 12:42 AM	#7
Muaddib Mentat Join Date: Jun 2013 Drives: 2013 Scion FRS 6MT Location: Vancouver Posts: 542 Thanks: 666 Thanked 358 Times in 198 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	No hydra don't care.

07-27-2013, 10:35 PM	#13
jthornton1993 Member Join Date: Jun 2013 Drives: FRS 10 series (1964) Location: Vandenberg AFB, CA Posts: 19 Thanks: 1 Thanked 7 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	marking

07-27-2013, 11:18 PM	#14
TRD_86 Senior Member Join Date: Jun 2012 Drives: 2013 86 white Location: ca Posts: 725 Thanks: 69 Thanked 129 Times in 93 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Good, but why did they replace all the silver piece? Can someone tell the aftermarket people to make something nice to replace ALL dull black plastic pieces in the car ? 1) The center plastic piece at the thermostat/fan 3-knobs. (The most ugly pieces right in the face) 2) A better nicer carbon look to upgrade the front dash board to all around the stereo HU. 3) Need a nicer piece on both door at the power window buttons. Need these pieces trim has the design quality look like the Lexus, BMW & Mercedes which called like Anthracite wood, charcoal or black bird eyes.

User Name		Remember Me?
Password