Who makes 2.75 front pipes? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Hawk77FT · 06-13-2013, 10:57 PM

I was wondering if you know who makes 2.75" front pipes? and maybe overpipes as well. I am in the market for one of those and I am not sure yet. I like Motiv a lot and even Berk does look good.

ramiram1984 · 06-13-2013, 10:59 PM

J2 engineering

I just purchased one for shits and giggles. $100 shipped with Jon Motoring.

vgi · 06-13-2013, 11:19 PM

these are http://www.ft86club.com/forums/showthread.php?t=35569

TyperRspec789 · 06-13-2013, 11:22 PM

Ultimate Racing, as noted above, makes the ONLY >2.5in overpipe on the market. I'm actually very interested on the fitment of 2.75" overpipe. They also make a 2.75" frontpipe to mate to it.

I personally run J2 engineering's frontpipe on both my turbo FRS and my NA FRS. For $100, it gets the job done. I'm satisfied with my purchases from them.

ramiram1984 · 06-13-2013, 11:38 PM

Quote:

Originally Posted by TyperRspec789

Ultimate Racing, as noted above, makes the ONLY >2.5in overpipe on the market. I'm actually very interested on the fitment of 2.75" overpipe. They also make a 2.75" frontpipe to mate to it.

I personally run J2 engineering's frontpipe on both my turbo FRS and my NA FRS. For $100, it gets the job done. I'm satisfied with my purchases from them.

Question: I have a perrin 2.5" over pipe and catted front pipe. I already ordered the J2, will I have problems fitting this???

TyperRspec789 · 06-13-2013, 11:39 PM

Quote:

Originally Posted by ramiram1984

Question: I have a perrin 2.5" over pipe and catted front pipe. I already ordered the J2, will I have problems fitting this???

Nah, you're fine. I mated my J2 fronpipe to the Motiv overpipe and the PLM overpipe. They are both 2.5" overpipes.

ramiram1984 · 06-13-2013, 11:41 PM

Sweet... thanks! I was very worried about this, but I said, it's only $100, but after watching that guy's video on here with the J2, I was like, damn, I outta try that with the rev works header.

vgi · 06-13-2013, 11:42 PM

was eying those myself. must be pretty loud though?

ramiram1984 · 06-13-2013, 11:53 PM

FOUND IT:

http://www.ft86club.com/forums/showt...J2+engineering

SmsAlSuwaidi · 06-14-2013, 12:00 AM

Quote:

Originally Posted by TyperRspec789

Nah, you're fine. I mated my J2 fronpipe to the Motiv overpipe and the PLM overpipe. They are both 2.5" overpipes.

Fsr my Buddyclub doesn't like the fitment of my J2 front pipe

after numerous times trying to get it not to leak i still tend to have a minor leak from the top, but it is barely noticeable on cold starts, and decreases as it warms up

Philly758 · 07-02-2013, 08:37 PM

Just ordered one of these... Hoping it sounds decent with a resonated catback. Well report back eventually.

06-13-2013, 10:57 PM	#1
Hawk77FT Senior Member Join Date: Jul 2012 Drives: GTS 86 Location: Australia Posts: 989 Thanks: 873 Thanked 476 Times in 272 Posts Mentioned: 12 Post(s) Tagged: 1 Thread(s)	Who makes 2.75 front pipes? I was wondering if you know who makes 2.75" front pipes? and maybe overpipes as well. I am in the market for one of those and I am not sure yet. I like Motiv a lot and even Berk does look good.

06-13-2013, 11:22 PM	#4
TyperRspec789 Version 2 Coming Soon... Join Date: Jul 2012 Drives: Turbo Argento FRS, Asphalt FRS Location: Nottingham, MD Posts: 677 Thanks: 124 Thanked 355 Times in 214 Posts Mentioned: 30 Post(s) Tagged: 1 Thread(s)	Ultimate Racing, as noted above, makes the ONLY >2.5in overpipe on the market. I'm actually very interested on the fitment of 2.75" overpipe. They also make a 2.75" frontpipe to mate to it. I personally run J2 engineering's frontpipe on both my turbo FRS and my NA FRS. For $100, it gets the job done. I'm satisfied with my purchases from them. __________________ Part Out Thread: http://www.ft86club.com/forums/showthread.php?t=39992

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Highflow Catted Front Pipes	Steve	Engine, Exhaust, Transmission	1	05-05-2013 01:29 PM
FA20CLUB OVER PIPE & FRONT PIPES ON SALE...	FA20Club.com	Engine, Exhaust, Bolt-Ons	10	01-19-2013 01:49 PM
Invidia N1 Exhaust + Front Pipes and MXP Catback	FBPARTS	Engine, Exhaust, Bolt-Ons	0	01-10-2013 11:23 AM
Who makes this front lip?	green_comet	Cosmetic Modification (Interior/Exterior/Lighting)	6	10-25-2012 10:01 PM

06-13-2013, 11:19 PM	#3
vgi Senior Member Join Date: Apr 2013 Drives: frs Location: nj Posts: 723 Thanks: 237 Thanked 348 Times in 232 Posts Mentioned: 58 Post(s) Tagged: 0 Thread(s)	these are http://www.ft86club.com/forums/showthread.php?t=35569

06-13-2013, 11:42 PM	#8
vgi Senior Member Join Date: Apr 2013 Drives: frs Location: nj Posts: 723 Thanks: 237 Thanked 348 Times in 232 Posts Mentioned: 58 Post(s) Tagged: 0 Thread(s)	was eying those myself. must be pretty loud though?

07-02-2013, 08:37 PM	#11
Philly758 Senior Member Join Date: Jan 2013 Drives: GMC Location: NY Posts: 258 Thanks: 76 Thanked 45 Times in 29 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Just ordered one of these... Hoping it sounds decent with a resonated catback. Well report back eventually.

User Name		Remember Me?
Password