Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   Who makes 2.75 front pipes? (https://www.ft86club.com/forums/showthread.php?t=39112)

Hawk77FT 06-13-2013 10:57 PM
Who makes 2.75 front pipes?
 
I was wondering if you know who makes 2.75" front pipes? and maybe overpipes as well. I am in the market for one of those and I am not sure yet. I like Motiv a lot and even Berk does look good.

ramiram1984 06-13-2013 10:59 PM
J2 engineering :D I just purchased one for shits and giggles. $100 shipped with Jon Motoring.

vgi 06-13-2013 11:19 PM
these are http://www.ft86club.com/forums/showthread.php?t=35569

TyperRspec789 06-13-2013 11:22 PM
Ultimate Racing, as noted above, makes the ONLY >2.5in overpipe on the market. I'm actually very interested on the fitment of 2.75" overpipe. They also make a 2.75" frontpipe to mate to it.

I personally run J2 engineering's frontpipe on both my turbo FRS and my NA FRS. For $100, it gets the job done. I'm satisfied with my purchases from them.

ramiram1984 06-13-2013 11:38 PM
Quote:
Originally Posted by TyperRspec789 (Post 1001255)
Ultimate Racing, as noted above, makes the ONLY >2.5in overpipe on the market. I'm actually very interested on the fitment of 2.75" overpipe. They also make a 2.75" frontpipe to mate to it.

I personally run J2 engineering's frontpipe on both my turbo FRS and my NA FRS. For $100, it gets the job done. I'm satisfied with my purchases from them.

Question: I have a perrin 2.5" over pipe and catted front pipe. I already ordered the J2, will I have problems fitting this???

TyperRspec789 06-13-2013 11:39 PM
Quote:
Originally Posted by ramiram1984 (Post 1001275)
Question: I have a perrin 2.5" over pipe and catted front pipe. I already ordered the J2, will I have problems fitting this???
Nah, you're fine. I mated my J2 fronpipe to the Motiv overpipe and the PLM overpipe. They are both 2.5" overpipes.

ramiram1984 06-13-2013 11:41 PM
Sweet... thanks! I was very worried about this, but I said, it's only $100, but after watching that guy's video on here with the J2, I was like, damn, I outta try that with the rev works header.

vgi 06-13-2013 11:42 PM
was eying those myself. must be pretty loud though?

ramiram1984 06-13-2013 11:53 PM
FOUND IT:

http://www.ft86club.com/forums/showt...J2+engineering

SmsAlSuwaidi 06-14-2013 12:00 AM
Quote:
Originally Posted by TyperRspec789 (Post 1001281)
Nah, you're fine. I mated my J2 fronpipe to the Motiv overpipe and the PLM overpipe. They are both 2.5" overpipes.
Fsr my Buddyclub doesn't like the fitment of my J2 front pipe :mad0259: after numerous times trying to get it not to leak i still tend to have a minor leak from the top, but it is barely noticeable on cold starts, and decreases as it warms up :)

Philly758 07-02-2013 08:37 PM
Just ordered one of these... Hoping it sounds decent with a resonated catback. Well report back eventually.


All times are GMT -4. The time now is 05:04 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.