Looking for mechanic for clutch job due to 2013 TOB

[se7en_force]

Hello,
Hope this is correct section of the boards to post this in. My TOB went out and my research lead me to buying a new after-market clutch and flywheel, fork, and another small part. I am calling around the Sacramento area and getting labor quotes around $1400, yet also seeing labor between 3 and 9 hours for this job on the forums. Can someone recommend to me a mechanic, could even be themselves, to help me get this done at a lower rate? My initial research lead me to expect the job to be around $300-500 at roughly a 3-hr job. To be fair, I don't know if that's accurate, so open to being told that is too low or unreasonable just sharing what I found surfing the forums. Any help is appreciated.
Thanks all!

[Grady]

3 hours is a little tight, 4 hours reasonable. Anyone that will do it for less than $500 in labor I would worry about their quality.