What did you do to your 2nd gen BRZ today?

[bobka7914]

Here ya go!
(And photobomb Lulu)

[Daedex]

I dont want to make a full thread on this, so i thought i'd ask it here: I want to get the shift spring kit from mtec: https://www.ftspeed.com/part/msl86-m...g-kit-brz-fr-s


anyone know if it fits in the gen2?

[Up4speed]

Originally Posted by bobka7914

Here ya go!
(And photobomb Lulu)

Is that the position that the OEM Subaru bracket sits, or is that the one you drilled, so it sits lower?

[bobka7914]

Originally Posted by Up4speed

Is that the position that the OEM Subaru bracket sits, or is that the one you drilled, so it sits lower?

This is the one that I drilled..

[AK2112]

Drove slowly to work in some snow. Not ideal but handled it well.



Then after work, I picked up a mint set of first gen take offs to use in the winter.



Finally, I stopped by the DIY wash just to use the high pressure water to blast off all the salt. Should be 50 this weekend and it will get a proper wash.

[Midnightsky]

Originally Posted by AK2112

Drove slowly to work in some snow. Not ideal but handled it well.



Then after work, I picked up a mint set of first gen take offs to use in the winter.



Finally, I stopped by the DIY wash just to use the high pressure water to blast off all the salt. Should be 50 this weekend and it will get a proper wash.

Why drive slow on snow/ice when you could go fast
https://youtube.com/shorts/F1-p1wT8O_g?feature=share

[AK2112]

Originally Posted by Midnightsky

Why drive slow on snow/ice when you could go fast
https://youtube.com/shorts/F1-p1wT8O_g?feature=share

Man, you were legit flying there. That's WILD.

[azndavepgh]

Installed my STI duracon shift knob (ST35022ST400). I got mine from Black Hawk Japan, but Subispeed has them in stock. It took longer to get here, but the total cost was about the same.

[eyeballs]

Swapped out the winter wheelset, installed crash bolts for more camber, flushed out the OE brake fluid for higher temp, and installed higher temp pads. The pad clips on these cars are odd and annoying. Haven't driven the car yet, but 3 presses of the tpms button did not yield a psi readout as it states in the manual (had the sensors previously paired as a 2nd set at the dealer before they were fitted to the wheels).

[AK2112]

Did the standard LED stuff. Map lights, trunk light and reverse lights.

[Panda Grahams]

Finally, past the break-in period! The car is amazing above 5k; really fun tying corners together in the higher revs.

[mr.whiskers]

Got a Crosstrek spare tire from a junkyard and put it in the car.
I noticed theres basically no insulation in the spare tire compartment, just painted metal. So I had this roll of thin foam insulation lying around, cut a circle out of it and stuck it in there.
Also theres already a nut welded into the floor, which is nice. I found a bolt with a proper thread and drilled a hole in a small piece of wood to use it as an improvised spare tire hold down bracket.
Also happy that all the stuff I had in the organizer fit into the spare tire, so the floor is perfectly flat.
Very happy with this purchase and a peace of mind from having a proper sparetire, not just a fix-a-flat kit.

[kaesu]

Installed the sti transmission mount and Cusco differential rear collar mount. Really eliminated a lot of the slack. There's a little bit of gear whine if you listen close enough, especially in 6th gear. There was a bit more NVH though. Not a lot but noticeable.

[PhatFreshPrince]

I got my windows tinted. I went with XPEL PRIME XR BLACK 35. It states that it blocks 78% of the infrared light. I doubt it will keep it cool in the summer down south.