How are you guys getting under your car to change the oil? - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

DJCarbine · 10-29-2013, 06:30 PM

Quote:

Originally Posted by Mikem53

How much of it do you collect? This would be most convenient and least messy way to handle it. How much gets left in the pan with this method...
I have always done it the old fashioned way.. My neighbor has a lift..

The first time I did it on my other cars I pulled the plug afterwards and only a few drops came out

I've used this method on every car I've owned, especially BMW because the filters on the E36 are on top as well so you don't need to go under the car.

I wrote up a DIY on it a while back http://www.ft86club.com/forums/showthread.php?t=32427

BRZnut · 10-29-2013, 08:11 PM

Well after doing a lot of reading, I've decided to forget the ramps and go with removing the oil from the top with the Hydro-Turf Oil Extractor OIL01:

http://www.ebay.com/itm/HYDRO-TURF-O...-/321140956465

I actually got it on Amazon. Will post a review after I am done

M1K3 · 10-30-2013, 08:09 AM

DJCarbine · 10-30-2013, 09:22 AM

Quote:

Originally Posted by BRZnut

Well after doing a lot of reading, I've decided to forget the ramps and go with removing the oil from the top with the Hydro-Turf Oil Extractor OIL01:

http://www.ebay.com/itm/HYDRO-TURF-O...-/321140956465

I actually got it on Amazon. Will post a review after I am done

Just make sure to use the largest hose you can and that the oil is warm!

Mikem53 · 10-30-2013, 09:30 AM

Quote:

Originally Posted by BRZnut

Well after doing a lot of reading, I've decided to forget the ramps and go with removing the oil from the top with the Hydro-Turf Oil Extractor OIL01:

http://www.ebay.com/itm/HYDRO-TURF-O...-/321140956465

I actually got it on Amazon. Will post a review after I am done

That looks like an old bong I used to own.

Maybe I will try to change my oil too!

Wepeel · 10-30-2013, 11:11 AM

Rhino Ramps. On stock suspension the bumper clears.

RandomHero · 10-30-2013, 03:24 PM

Wingardium Leviosa! Works every time. Remember to swish and flick

BRZnut · 10-30-2013, 09:28 PM

Quote:

Originally Posted by DJCarbine

Just make sure to use the largest hose you can and that the oil is warm!

Will do!

bkblitzed · 10-30-2013, 10:43 PM

anyone know any good but fairly cheap low profile jack yet still have a nice lifting weight?

M1K3 · 10-31-2013, 07:46 AM

Quote:

Originally Posted by bkblitzed

anyone know any good but fairly cheap low profile jack yet still have a nice lifting weight?

I got the 2 Ton Low Profile Jack from Harbor Freight

It's a heavy SomBitch though!!!

Efenys · 10-31-2013, 03:59 PM

I run onto 2x10's and flip my valve. Works fine for me. I would absolutely hate to do it with a wrench though.

rice_classic · 10-31-2013, 05:15 PM

Quote:

Originally Posted by M1K3

I got the 2 Ton Low Profile Jack from Harbor Freight

It's a heavy SomBitch though!!!

Yeah, it's 93.3lbs.

Buy the aluminum one instead.

http://www.harborfreight.com/automot...ons-68051.html

rice_classic · 10-31-2013, 05:16 PM

Quote:

Originally Posted by Mikem53

That looks like an old bong I used to own.

Maybe I will try to change my oil too!

Just make sure to really clean your bong before you use it again.

M1K3 · 10-31-2013, 06:29 PM

Quote:

Originally Posted by rice_classic

Yeah, it's 93.3lbs.

Buy the aluminum one instead.

http://www.harborfreight.com/automot...ons-68051.html

Yeah, well the Aluminum one is not low enough for me and I ain't on a NASCAR pitcrew so I don't need to pick up no stinking jack.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BC Coilover settings you guys guys ride on	g0lden	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	26	04-06-2014 06:56 PM
Help from the ATL guys?	Venom600	Southeast	22	08-16-2013 11:09 PM
what do you guys think?	xpicer	Cosmetic Modification (Interior/Exterior/Lighting)	4	08-16-2012 01:08 AM
What do you guys think??	Arcangel	Scion FR-S / Toyota 86 GT86 General Forum	19	10-30-2009 11:06 AM

10-29-2013, 08:11 PM	#16
BRZnut Senior Member Join Date: Oct 2012 Drives: BRZ DGM Limited Location: USA Posts: 1,237 Thanks: 5 Thanked 431 Times in 250 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Well after doing a lot of reading, I've decided to forget the ramps and go with removing the oil from the top with the Hydro-Turf Oil Extractor OIL01: http://www.ebay.com/itm/HYDRO-TURF-O...-/321140956465 I actually got it on Amazon. Will post a review after I am done

10-30-2013, 08:09 AM	#17
M1K3 Senior Member Join Date: Jun 2012 Drives: vrooom... Location: NOVA Posts: 260 Thanks: 287 Thanked 209 Times in 115 Posts Mentioned: 0 Post(s) Tagged: 3 Thread(s)

10-30-2013, 11:11 AM	#20
Wepeel Senior Member Join Date: May 2012 Drives: '13 BRZ Ltd Location: PA Posts: 458 Thanks: 265 Thanked 229 Times in 117 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Rhino Ramps. On stock suspension the bumper clears.

10-30-2013, 10:43 PM	#23
bkblitzed is better than you Join Date: Jun 2013 Drives: 2013 raven FRS Location: Norcal Posts: 1,293 Thanks: 591 Thanked 1,347 Times in 745 Posts Mentioned: 25 Post(s) Tagged: 0 Thread(s)	anyone know any good but fairly cheap low profile jack yet still have a nice lifting weight?

10-31-2013, 03:59 PM	#25
Efenys Member Join Date: Nov 2012 Drives: Galaxy Blue 6sp BRZ LTD Location: Lancaster/Hoboken Posts: 76 Thanks: 16 Thanked 19 Times in 11 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I run onto 2x10's and flip my valve. Works fine for me. I would absolutely hate to do it with a wrench though.

User Name		Remember Me?
Password