PERRIN Big 3" Catback - Page 6 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

1Cor10:23 · 04-24-2014, 12:03 PM

If I had to guess, likely 2.5.not sure if you can get 3" in unresonated form, at least not anymore.

Sent from my Nexus 5 using Tapatalk

protpibe · 04-24-2014, 12:26 PM

Just installed mine yesterday and I love it. It's a bit loud for my tastes, but I have a catted front pipe to go in which should tone it down a bit

[ame="https://www.youtube.com/watch?v=rAMd0bOCFco"]3" Perrin Non-Resonated on a AVO Turbo BRZ (catless) - YouTube[/ame]

Chad86 · 04-24-2014, 11:09 PM

Quote:

Originally Posted by 1Cor10:23

If I had to guess, likely 2.5.not sure if you can get 3" in unresonated form, at least not anymore.

Sent from my Nexus 5 using Tapatalk

Both options are available.
I will be getting the 3" resonated!

http://perrinperformance.com/i-13464...-fr-s-brz.html

5AD86D · 04-25-2014, 06:48 AM

So is the resonated 3 inch very loud? I plan to FI later so thats why this pipe is a good option but I definetly don't want alot of noise.

Malt · 04-25-2014, 07:48 AM

Quote:

Originally Posted by 5AD86D

So is the resonated 3 inch very loud? I plan to FI later so thats why this pipe is a good option but I definetly don't want alot of noise.

You don't need the 3" when you go FI. The resonated 3" catback on its own isn't overly loud from what I've heard but once you add a 3" front pipe and catless header its excessively loud. Stick with the 2.5" and you'll be much happier.

TOZER · 04-25-2014, 08:19 AM

Quote:

Originally Posted by 5AD86D

So is the resonated 3 inch very loud? I plan to FI later so thats why this pipe is a good option but I definetly don't want alot of noise.

Not very loud

DantKR · 04-25-2014, 08:47 AM

3" Resonated was AMAZING sounding. Well worth it imo.

Urmyson · 04-25-2014, 09:44 AM

How loud is it around 2-3k rpm's? I have a nameless 3" axleback, does anyone know how they compare?

1Cor10:23 · 04-25-2014, 09:50 AM

It's really not that loud when getting on it, only thing that annoys me is the drone when coasting down in gear. On the gas, always sounds good

Sent from my Nexus 5 using Tapatalk

Freeman · 04-25-2014, 10:02 AM

Quote:

Originally Posted by Urmyson

How loud is it around 2-3k rpm's? I have a nameless 3" axleback, does anyone know how they compare?

The nameless piece is louder. I used to have the same axleback.

Urmyson · 04-25-2014, 10:07 AM

Quote:

Originally Posted by Freeman

The nameless piece is louder. I used to have the same axleback.

So was it worth switching in your opinion? For me its just a little loud driving on the highway doing 70-80(which is my commute everyday).

Freeman · 04-25-2014, 10:15 AM

Quote:

Originally Posted by Urmyson

So was it worth switching in your opinion? For me its just a little loud driving on the highway doing 70-80(which is my commute everyday).

If all you have is the axleback as far as exhaust mods, then you'll be fine. I can't really say if the 3 inch will be too loud for you though. You Might want to consider the 2.5" catback if you're sensitive to noise.

BRZtoni · 04-25-2014, 10:49 AM

Since perrin doesnt make front pipes anymore would mating an invidia 2.5 frony pipe have issues with the 3in perrin cat back?would catless be too loud or should i get resonated?

ramiram1984 · 04-25-2014, 11:00 AM

Quote:

Originally Posted by BRZtoni

Since perrin doesnt make front pipes anymore would mating an invidia 2.5 frony pipe have issues with the 3in perrin cat back?would catless be too loud or should i get resonated?

No you're good

04-24-2014, 12:03 PM	#71
1Cor10:23 Senior Member Join Date: Jul 2013 Drives: '13 Whiteout FR-S (M/T) Location: GTA Posts: 1,205 Thanks: 492 Thanked 392 Times in 238 Posts Mentioned: 14 Post(s) Tagged: 1 Thread(s)	If I had to guess, likely 2.5.not sure if you can get 3" in unresonated form, at least not anymore. Sent from my Nexus 5 using Tapatalk __________________ \|1Cor10:23 \| Whiteout FR-S \| Form Follows Function Build\|

04-24-2014, 12:26 PM	#72
protpibe Senior Member Join Date: Oct 2013 Drives: 4-Runner Sport - 13' BRZ SportTech Location: Winnipeg Posts: 1,395 Thanks: 253 Thanked 839 Times in 459 Posts Mentioned: 18 Post(s) Tagged: 0 Thread(s)	Just installed mine yesterday and I love it. It's a bit loud for my tastes, but I have a catted front pipe to go in which should tone it down a bit [ame="https://www.youtube.com/watch?v=rAMd0bOCFco"]3" Perrin Non-Resonated on a AVO Turbo BRZ (catless) - YouTube[/ame] __________________ Top Tier Imports - Check out my build journal HERE

04-25-2014, 09:50 AM	#79
1Cor10:23 Senior Member Join Date: Jul 2013 Drives: '13 Whiteout FR-S (M/T) Location: GTA Posts: 1,205 Thanks: 492 Thanked 392 Times in 238 Posts Mentioned: 14 Post(s) Tagged: 1 Thread(s)	It's really not that loud when getting on it, only thing that annoys me is the drone when coasting down in gear. On the gas, always sounds good Sent from my Nexus 5 using Tapatalk __________________ \|1Cor10:23 \| Whiteout FR-S \| Form Follows Function Build\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Perrin 2.5" Non Res Catback	Pudge Ate Me	Engine, Exhaust, Transmission	8	06-08-2013 01:11 AM
WTB: Perrin Catback system	WRB_BRZ	Engine, Exhaust, Bolt-Ons	0	05-09-2013 10:22 PM
anyone with Perrin Resonated Catback?	Tylub	Southern California	5	04-02-2013 07:55 PM
Nameless DP and Perrin Catback	cnk	Engine, Exhaust, Transmission	4	09-21-2012 11:58 PM
Perrin Catback w/ Resonator	Minetious	Engine, Exhaust, Transmission	10	09-08-2012 11:24 AM

04-25-2014, 08:47 AM	#77
DantKR Senior Member Join Date: Aug 2010 Drives: Subaru BRZ LT Location: NC Posts: 759 Thanks: 7 Thanked 124 Times in 71 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	3" Resonated was AMAZING sounding. Well worth it imo.

04-25-2014, 09:44 AM	#78
Urmyson Senior Member Join Date: Aug 2013 Drives: BRZ Location: FL Posts: 191 Thanks: 12 Thanked 45 Times in 28 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	How loud is it around 2-3k rpm's? I have a nameless 3" axleback, does anyone know how they compare?

04-25-2014, 10:49 AM	#83
BRZtoni Turbo E85 Join Date: Sep 2013 Drives: 13 wrb brz Location: torrance, ca Posts: 1,093 Thanks: 172 Thanked 555 Times in 349 Posts Mentioned: 32 Post(s) Tagged: 0 Thread(s)	Since perrin doesnt make front pipes anymore would mating an invidia 2.5 frony pipe have issues with the 3in perrin cat back?would catless be too loud or should i get resonated?

User Name		Remember Me?
Password