TIC BRZ

[Kilzod]

Looks good! Love those wheels on your car!

[Turn in Concepts]

There is a NEW thread up in the Vendor classifieds under suspension. . . . .

[Turn in Concepts]

You guys should be just as excited as us on this!




We absolutely LOVE the set that we have!

Check the post above!

[Turn in Concepts]

Something else we have been testing. . .

[VSGTS14]

so now your setup has me interested, the koni + ast + rce's. how do you like it all? i'd say it's the best suspension mod to do for a cheaper alternative to kw's.

[ayau]

I'm also interested in a mini review of the Koni and RCE yellows.

[Turn in Concepts]

Originally Posted by ayau

I'm also interested in a mini review of the Koni and RCE yellows.

Sorry for the delay, we do not seem to be getting emails with these updates. We have posted this else where but wanted to post in here as well for anyone interested!

Koni with RCE Yellows

After a few months of testing this suspension setup we have completely fallen in love with it. The ride quality is very similar to stock and the car is quite comfortable to drive making this setup perfect for a daily driver. As expected, the only noticeable difference in comfort is found over large bumps and rough patches in the road however we found that for street driving, setting the dampers to their lower settings minimized the increased roughness of the Konis compared tot he OEM setup.

When you push the car in the turns, the fun really begins, much of the stock body roll is eliminated. The responsiveness of the car at turn in is astounding! The nimbleness that the car has in stock forum is not lost with this setup. The car can still be thrown around and controlled but is now even easier to control at the limit. Whether you are tracking, Auto X, or just hooning the car is simply more fun to drive, and much faster!

For anyone looking for a setup that looks great, performs great, and feels great this is the setup for you.

[acollite]

Do you feel a need for different sways with this set up , Koni's + RCE yellows ?

[bakerr6]

I know I spoke with you on another forum about the Whiteline LCAs, but are you planning on keeping the SPC or switching to the whiteline ones?

[Turn in Concepts]

Originally Posted by acollite

Do you feel a need for different sways with this set up , Koni's + RCE yellows ?

We are currently running a STOCK front sway and a STOCK wrx rear sway.

The setup is almost perfect from a balance standpoint.

Something that we have been meaning to do is swap out bars, just have not had the time.

[Turn in Concepts]

Originally Posted by bakerr6

I know I spoke with you on another forum about the Whiteline LCAs, but are you planning on keeping the SPC or switching to the whiteline ones?

We more than likely will swap the SPC out for the whiteline to test them.

[2point0]

Originally Posted by Turn in Concepts

We are currently running a STOCK front sway and a STOCK wrx rear sway.

16mm? For some reason I want to say there were more than one size for the 08+ cars, but maybe I'm thinking of the STi.

[Turn in Concepts]

Originally Posted by 2point0

16mm? For some reason I want to say there were more than one size for the 08+ cars, but maybe I'm thinking of the STi.

That is correct, the stock wrx bar is a 16 and a stock sti is a 19.

[bakerr6]

Originally Posted by Turn in Concepts

We more than likely will swap the SPC out for the whiteline to test them.

Thanks, just like over there, as soon as you find out you are able to order them, let me know. I'm waiting to put on my mach 5 springs until then. I will get back to you on the Camber plates