New dyno results for charged86!!!

[nelsmar]

Originally Posted by charged86

Well to me its not slipping

Sorry I. Are a typo in my post. I meant that the blue belt would slip pretty bad. I think jacks car may have been slipping him and me ran on the same dyno but there were a number of mechanical issues on his car that were later resolved once he dynos again we will find out if he had a slip issue I meant that you may not be skipping as you had actually replaced your belt. I typically trust dynasty's word of advice my self. Although I have no idea what belt they recommend. They actually test their stuff unlike some shops.

[King Tut]

Originally Posted by charged86

Dynojet numbers. 375whp. 264trq 15psi. Dynosty tuned pure e85

That is about what I figured you were making after we dynoed our cars at the 86 Nationals, and I knew what mine made on a Dynojet.

[charged86]

Originally Posted by King Tut

That is about what I figured you were making after we dynoed our cars at the 86 Nationals, and I knew what mine made on a Dynojet.

Yeppers

[Diode Dynamics]

Nick C.

[SmsAlSuwaidi]

Booom http://www.ft86club.com/forums/showthread.php?t=53027

[jack43]

Brett who was dyno-ing my car, his words were:

"There's no way that fucken belt is slippin'!"

[charged86]

Originally Posted by SmsAlSuwaidi

Booom http://www.ft86club.com/forums/showthread.php?t=53027

Mine is still faster.

[charged86]

Originally Posted by SmsAlSuwaidi

Booom http://www.ft86club.com/forums/showthread.php?t=53027

Hmm

[SmsAlSuwaidi]

Originally Posted by charged86

My numbers are in corrected or smoothed. His were smoothed by 5. Sae 1.05. Repost his dyno uncorrected and in smoothed. ............boooom. thanks

Will that escalated quickly, only posted it in a "friendly" comparison ?


Sent from my IBrick

[FA20Club.com]

Your chart was SAE and from the smoothing of you map looks like you had smoothing turned up to 5 as well. if you drop the smoothing down to "0" it will be identical to "5" major differences are around "3" on the smoothing. Ill get Jack's drf files and if you want you can send yours over and ill overlay them for you in multiple settings of correction and smoothing. Either way both cars made good power. Jacks on his stock header and E77 on that run as well.

[charged86]

Originally Posted by FA20Club.com

Your chart was SAE and from the smoothing of you map looks like you had smoothing turned up to 5 as well. if you drop the smoothing down to "0" it will be identical to "5" major differences are around "3" on the smoothing. Ill get Jack's drf files and if you want you can send yours over and ill overlay them for you in multiple settings of correction and smoothing. Either way both cars made good power. Jacks on his stock header and E77 on that run as well.

Mine are only printed unless I call that place. I actually didn't see the sae correct 5 in the top of my graph. But it does not say sae 1.05 by my file run numbers is what I was thinking. I actually got a little pissed when what's his name posted that link and was like "boom". If he would have said I found this car with big numbers too. But he decided to troll

[charged86]

Originally Posted by SmsAlSuwaidi

Will that escalated quickly, only posted it in a "friendly" comparison ?


Sent from my IBrick

Its not friendly to say "boom". But doesn't really matter because my car is on vortechs blog and his isnt. So boom.

[FA20Club.com]

Originally Posted by charged86

Mine are only printed unless I call that place. I actually didn't see the sae correct 5 in the top of my graph. But it does not say sae 1.05 by my file run numbers is what I was thinking. I actually got a little pissed when what's his name posted that link and was like "boom". If he would have said I found this car with big numbers too. But he decided to troll

Understandable.

[charged86]

Originally Posted by FA20Club.com

Understandable.

Why I am confused is mine does say smoothing 5 and on my line graph says 375whp. But the run file number still says 375whp. Where on his line graph it says 362 and on his run filenumber reads 382whp? What's that mean