(HELP) 17x9 RPF1 meaty fitment

[Shneegle]

Originally Posted by rcm47

@Shneegle thanks, that looks great! So this was just springs, camber bolts, and adjustable rear LCAs?

Thanks, and correct. It has been changed since then but at the time of those photos that's what it was.

Originally Posted by kpamir

I recently moved and have to raise my car a bit, I am on HSD coils and they have unfortunately seized up hard.

My cheapest option is to put the stock struts in, but I do want that slight drop so Ill be getting the trd lowering springs.

I am running rpf1 17x9 +35 on 245/40/17 mpss. I am seeing that a couple of the guys here have that set up and it works fine with the 1" drop from the trd lowering springs.

Just to confirm before i make the purchase are the camber bolts necessary for the fitment ? Or was that installed because you wanted that slight tuck in for the wheels?

Thanks!

Autox/track is why I had them in. I wanted closer to -3 degree of camber in the front but without top-hats you can get that. The camber was bringing the wheel/tires closer to the shock/spring. No the bolts are not necessary for the fitment. The tops of the tires/wheel might poke a little more tho.

[kpamir]

Yeah they do poke a bit, I had the wheels on stock for a bit before getting the HSDs. But I can live with that if I can get into my garage haha.

Thanks for the confirmation dude.

[DarkSideFRS]

u'll be fine.. i have 17x9 57DR +38 lowered on TRD springs with -1.7 camber up front and i pretty close to the perch... with +35, u'll have tons of space

[Wise]

I've tracked with 245/40/17 on RPF1 17x9 +35 and got zero rubbing at all.

Pic below shows the wheel/coilover under heavy compression.

[carlovestela]

Hows the performance on 17 9 with 245/40 tires?
It got slower?

Originally Posted by DarkSideFRS

u'll be fine.. i have 17x9 57DR +38 lowered on TRD springs with -1.7 camber up front and i pretty close to the perch... with +35, u'll have tons of space