Issue: Monogram Headlights on FRS Base, DRL Triggering HiBeam

[kthxbai]

Originally Posted by EndlessAzure

If you want DRL, you will need to add a new wire:

1. Either through a splice from the DRL resistor power ("traditional method" with high beam flap issue)
2. Or a Splice from high beam power with a diode, to prevent the high beam from triggering at night due to the always-on module (this thread).

Thank you very much for the quick reply. Would you happen to have a photo of your actual set-up? I've never used a diode before because my wiring skills is just not at that level. Currently have the LED+ wire hooked to the DRL resistor + for DRL but it obviously does not work with the BeatSonic always-on module.

Sent from my Pixel 3 using Tapatalk

[EndlessAzure]

Originally Posted by kthxbai

Thank you very much for the quick reply. Would you happen to have a photo of your actual set-up? I've never used a diode before because my wiring skills is just not at that level. Currently have the LED+ wire hooked to the DRL resistor + for DRL but it obviously does not work with the BeatSonic always-on module.

Sent from my Pixel 3 using Tapatalk

Not sure the images will help all that much.

I don't remember if I modified the Beatsonic module pins, but I did splice the diode into the high beam power from there


The pin diagram should be accurate

[kthxbai]

Originally Posted by EndlessAzure

Not sure the images will help all that much.

I don't remember if I modified the Beatsonic module pins, but I did splice the diode into the high beam power from there


The pin diagram should be accurate

I didn't even think about using the diodes on the module itself, just goes to show my lack of knowledge in the field of wiring. Thank you for taking the time to send the photos and pinout. You and the many other members are the reason why this forum is still thriving.

With the photos, I think it is making more sense. Will dive into this this weekend. If I have more questions, hope you don't mind me sending another message? Thanks again @EndlessAzure !

Sent from my Pixel 3 using Tapatalk