2017 Alignment

[Tcoat]

Originally Posted by solidONE

Right... you're not going to be able to fit a 16mm bolt in a 14mm hole are you? lol

.

Originally Posted by Racecomp Engineering

People will try

- Andrew

[strat61caster]

Originally Posted by Tcoat

The official tool of Ford precision alignments.

[finch1750]

Originally Posted by Azzudien

Having trouble posting picture, so basically I put in some camber bolts on the 2017 PP car to get a little - camber, car is completely stock otherwise on the suspension.
Went to get alignment this morning, and guy that owns the shop turns out to be a regular on HPDE days and knew exactly what I was looking to do.

Both of us where surprised when he put it on the machine and the rears out of the factory already had -1.4 camber. I was under the impression stock alignments and zero negative camber rear? He was actually able to get the rears to -1.7. Fronts unfortunately we could only get to -1.4 with just the camber bolts.

So current alignment, stock suspension with whiteline camber bolts.

Left front Right Front
-1.4 Camber -1.4
5.7 Caster 5.8
.01 Toe .02

Left Rear
-1.7 Camber -1.7
.08 Toe .06

Camber options galore (cheap to $$$)
http://www.ft86club.com/forums/showthread.php?t=103609