Building audio setup. Need amplifier advice from the experts - Page 4 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Gir · 05-18-2013, 11:44 AM

I just put my amp under the floor where the tock amp normally goes (no stock amp on the Aus spec). Works great, and haven't had cooling issues, even with an Australian summer.

Kayzer Soze · 05-23-2013, 12:55 PM

damn it, got all my parts in ready to install, and now my stock headunit (avic 9310bt) is askign for a password that i dont know....car was a demo driven by a regional manager, so he mustve entered the code. my dealership is trying to get in touch with him to see if he knows what he entered, otherwise they gotta ship the bloody thing to pioneer for them to enter the master code

so pissed, wanted to install this weekend

Sbeezy · 05-23-2013, 01:36 PM

Try 00000

Sent from my SPH-L710 using Tapatalk 2

Kayzer Soze · 05-23-2013, 03:53 PM

i did... tried
000
0000
00000
111
1111
11111
1234
12345
123456
01234012345
subaru
brz
default
password
999
9999
99999

wasnt any of the usual default ones. pioneer says it was set by a person if the faceplate was ever removed since it prompts to create it...and since it was driven by someone before me, they likely set out. total fail, the dealership better provide me with a good solution aside from continuously telling me to call pioneer which i already did

Sbeezy · 05-23-2013, 05:22 PM

Quote:

Originally Posted by Kayzer Soze

i did... tried
000
0000
00000
111
1111
11111
1234
12345
123456
01234012345
subaru
brz
default
password
999
9999
99999

wasnt any of the usual default ones. pioneer says it was set by a person if the faceplate was ever removed since it prompts to create it...and since it was driven by someone before me, they likely set out. total fail, the dealership better provide me with a good solution aside from continuously telling me to call pioneer which i already did

try to get the contact info for the previous owner from the dealer or the DMV or get a carfax and see if the previous drivers name is on it and look him up and call him up!

Sbeezy · 05-23-2013, 07:01 PM

@kayzer i may be able to rescue you with this fingers crossed!

Kayzer Soze · 05-23-2013, 09:05 PM

though i already tried that, i think my mistake was using a mac....let me try again.....thanks Sbeezy for checking it out, i will try again and give you guys news

930BTW is the same as 9310bt i think (both models are on my instruction manual)

http://elektrotanya.com/pioneer_avic.../download.html

Kayzer Soze · 05-23-2013, 09:33 PM

sick, it worked! note you need to use a PC and not mac for the transfer of files to micro sd

also note, im absolutely the dumbest f in the world cuz when it showed the password.....i was so convinced i never set the password seeing how i barely got the car 2 months ago and would have remembered, anyhow it was a pswd i use for unsecure/unimportant things for over 10 years. FML

despit my dumbness, thanks again for all the help guys. and hopefully this will help ppl in future who really lose their pswd!

now to get back to install, i will be going down accross the border next weekend to get everything and installl....cant do this weekend since im still waiting on enclosure to be delivered :/ cant wait to post the results!

cheers!

Sbeezy · 05-24-2013, 08:32 AM

Take lots of pics and make a build log... I'm glad I could be of assistance to you

Kayzer Soze · 05-28-2013, 11:22 AM

I got bored waiting so I ran all the wires last night. Was gonna do door speakers but realized I needed spacers. All I will say is how nice and easy it is to remove panels in this car!

Do you guys think the alpine amp will be ok if I install in the stock amp location under trunk floor or does it risk overheating?

Sbeezy · 05-28-2013, 12:02 PM

It should be fine as long as it isn't clipping!

Sent from my SPH-L710 using Tapatalk 2

Kayzer Soze · 05-29-2013, 01:29 AM

here are some pics.... all prep work for tomorrow when i pick up the box and spacers. ran wires, sound deadened trunk hatch and prepared location for amp (had to cut off the screw that the stock amp use to bolt to car)

Sbeezy · 05-29-2013, 01:39 AM

Hell yeah!

Sent from my SPH-L710 using Tapatalk 2

BlueSTaR · 05-29-2013, 01:51 AM

Awesome. I'm considering doing my own install, so as many pics as you can get will be greatly appreciated.

Also, what did you guys do up front? I think I'm just gonna do front speakers and go quality and skip the back.

05-23-2013, 07:01 PM	#48
Sbeezy Senior Member Join Date: Apr 2013 Drives: 2001 ZX2, WRBP BRZ (soon hopefully) Location: Port Arthur Tx Posts: 182 Thanks: 111 Thanked 23 Times in 23 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	@kayzer i may be able to rescue you with this fingers crossed! Last edited by Sbeezy; 05-24-2013 at 08:30 AM. Reason: files contained here could lead to theft...

05-29-2013, 01:29 AM	#54
Kayzer Soze Senior Member Join Date: Mar 2013 Drives: 2013 BRZ 6MT Satin White Pearl Location: Montreal, QC Posts: 147 Thanks: 9 Thanked 45 Times in 23 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	here are some pics.... all prep work for tomorrow when i pick up the box and spacers. ran wires, sound deadened trunk hatch and prepared location for amp (had to cut off the screw that the stock amp use to bolt to car) Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GaN-MaN's Custom Audio Setup + Sub/Amp Box	GaN-MaN	Electronics \| Audio \| NAV \| Infotainment	23	03-26-2014 06:43 AM
Boombacloud's BRZ Audio Build...Need Help/Advice	boombacloud	Electronics \| Audio \| NAV \| Infotainment	1	12-28-2012 01:35 AM
In need of advice (full setup)	computertech01	Electronics \| Audio \| NAV \| Infotainment	8	08-02-2012 07:23 PM
Any specs on the standard Audio setup?	viking84	Electronics \| Audio \| NAV \| Infotainment	72	05-30-2012 04:34 AM
Audio setup	315FR-S	Electronics \| Audio \| NAV \| Infotainment	20	05-17-2012 07:23 PM

05-23-2013, 12:55 PM	#44
Kayzer Soze Senior Member Join Date: Mar 2013 Drives: 2013 BRZ 6MT Satin White Pearl Location: Montreal, QC Posts: 147 Thanks: 9 Thanked 45 Times in 23 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	damn it, got all my parts in ready to install, and now my stock headunit (avic 9310bt) is askign for a password that i dont know....car was a demo driven by a regional manager, so he mustve entered the code. my dealership is trying to get in touch with him to see if he knows what he entered, otherwise they gotta ship the bloody thing to pioneer for them to enter the master code so pissed, wanted to install this weekend

05-23-2013, 01:36 PM	#45
Sbeezy Senior Member Join Date: Apr 2013 Drives: 2001 ZX2, WRBP BRZ (soon hopefully) Location: Port Arthur Tx Posts: 182 Thanks: 111 Thanked 23 Times in 23 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Try 00000 Sent from my SPH-L710 using Tapatalk 2

05-23-2013, 03:53 PM	#46
Kayzer Soze Senior Member Join Date: Mar 2013 Drives: 2013 BRZ 6MT Satin White Pearl Location: Montreal, QC Posts: 147 Thanks: 9 Thanked 45 Times in 23 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	i did... tried 000 0000 00000 111 1111 11111 1234 12345 123456 01234012345 subaru brz default password 999 9999 99999 wasnt any of the usual default ones. pioneer says it was set by a person if the faceplate was ever removed since it prompts to create it...and since it was driven by someone before me, they likely set out. total fail, the dealership better provide me with a good solution aside from continuously telling me to call pioneer which i already did

05-23-2013, 09:05 PM	#49
Kayzer Soze Senior Member Join Date: Mar 2013 Drives: 2013 BRZ 6MT Satin White Pearl Location: Montreal, QC Posts: 147 Thanks: 9 Thanked 45 Times in 23 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	though i already tried that, i think my mistake was using a mac....let me try again.....thanks Sbeezy for checking it out, i will try again and give you guys news 930BTW is the same as 9310bt i think (both models are on my instruction manual) http://elektrotanya.com/pioneer_avic.../download.html

05-23-2013, 09:33 PM	#50
Kayzer Soze Senior Member Join Date: Mar 2013 Drives: 2013 BRZ 6MT Satin White Pearl Location: Montreal, QC Posts: 147 Thanks: 9 Thanked 45 Times in 23 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	sick, it worked! note you need to use a PC and not mac for the transfer of files to micro sd also note, im absolutely the dumbest f in the world cuz when it showed the password.....i was so convinced i never set the password seeing how i barely got the car 2 months ago and would have remembered, anyhow it was a pswd i use for unsecure/unimportant things for over 10 years. FML despit my dumbness, thanks again for all the help guys. and hopefully this will help ppl in future who really lose their pswd! now to get back to install, i will be going down accross the border next weekend to get everything and installl....cant do this weekend since im still waiting on enclosure to be delivered :/ cant wait to post the results! cheers!

05-24-2013, 08:32 AM	#51
Sbeezy Senior Member Join Date: Apr 2013 Drives: 2001 ZX2, WRBP BRZ (soon hopefully) Location: Port Arthur Tx Posts: 182 Thanks: 111 Thanked 23 Times in 23 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Take lots of pics and make a build log... I'm glad I could be of assistance to you

05-28-2013, 11:22 AM	#52
Kayzer Soze Senior Member Join Date: Mar 2013 Drives: 2013 BRZ 6MT Satin White Pearl Location: Montreal, QC Posts: 147 Thanks: 9 Thanked 45 Times in 23 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I got bored waiting so I ran all the wires last night. Was gonna do door speakers but realized I needed spacers. All I will say is how nice and easy it is to remove panels in this car! Do you guys think the alpine amp will be ok if I install in the stock amp location under trunk floor or does it risk overheating?

05-28-2013, 12:02 PM	#53
Sbeezy Senior Member Join Date: Apr 2013 Drives: 2001 ZX2, WRBP BRZ (soon hopefully) Location: Port Arthur Tx Posts: 182 Thanks: 111 Thanked 23 Times in 23 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	It should be fine as long as it isn't clipping! Sent from my SPH-L710 using Tapatalk 2

05-29-2013, 01:39 AM	#55
Sbeezy Senior Member Join Date: Apr 2013 Drives: 2001 ZX2, WRBP BRZ (soon hopefully) Location: Port Arthur Tx Posts: 182 Thanks: 111 Thanked 23 Times in 23 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Hell yeah! Sent from my SPH-L710 using Tapatalk 2

05-29-2013, 01:51 AM	#56
BlueSTaR Senior Member Join Date: May 2013 Drives: 13 BRZ Limited & 16 Hyperblue Location: Bonney Lake, WA Posts: 451 Thanks: 14 Thanked 235 Times in 126 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Awesome. I'm considering doing my own install, so as many pics as you can get will be greatly appreciated. Also, what did you guys do up front? I think I'm just gonna do front speakers and go quality and skip the back.

User Name		Remember Me?
Password