whiteline rear subframe inserts

[charged86]

Originally Posted by ATL BRZ

Just trying to help. Sorry if I sounded condescending. Hope you get it sorted out. The bushings are worth the trouble to install.

I was trying to say we got them in. As we pulled the bolts on driver it seemed the threads in the car were not square. So when bolts came out and we tried to finger thread it was very difficult. Had to use an impact I hope I never have to pull them out or I will have to thread chase em.

[ATL BRZ]

Originally Posted by charged86

I was trying to say we got them in. As we pulled the bolts on driver it seemed the threads in the car were not square. So when bolts came out and we tried to finger thread it was very difficult. Had to use an impact I hope I never have to pull them out or I will have to thread chase em.

I feel the same way about my bolts, they aren't ever coming out again haha. I had a couple scares during my install when I thought I was going to cross thread them, but I backed them out and put a little bit of anti-seize on the first few threads to help get the threads started and finished with hand tools. I had air tools available but I was afraid of cross-threading, so I didn't use them.

[charged86]

Originally Posted by ATL BRZ

I feel the same way about my bolts, they aren't ever coming out again haha. I had a couple scares during my install when I thought I was going to cross thread them, but I backed them out and put a little bit of anti-seize on the first few threads to help get the threads started and finished with hand tools. I had air tools available but I was afraid of cross-threading, so I didn't use them.

I used anti seize as well and half threaded and took back out to inspect threads they appeared to be ok. Idk it was a little frustrating