FRS300 Rebuild Has Begun..Blown Motor to Built Monster - Page 5 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

s2d4 · 04-18-2013, 04:32 PM

Quote:

Originally Posted by Frs300

CP 10:1 CR Pistons

any particular reason for the drop?

Frs300 · 04-18-2013, 04:39 PM

Quote:

Originally Posted by s2d4

any particular reason for the drop?

more boost and pump gas...no E85 around here

JoeBoxer · 04-18-2013, 04:39 PM

Quote:

Originally Posted by usptwins

when did this happen? He hasn't updated any of his threads... that i've seen....

not to derail Tony's thread but it has, i asked if it was stock block and he said not anymore.

FA20Club.com · 04-18-2013, 04:45 PM

Quote:

Originally Posted by s2d4

any particular reason for the drop?

pistons only available in 9.5 & 10.5 CR no point in building a motor with forged internals trying to add margin of error and trying to keep 12.5 CR

Jahdai42 · 04-18-2013, 04:47 PM

In for the outcome.

s2d4 · 04-18-2013, 05:05 PM

Quote:

Originally Posted by Frs300

more boost and pump gas...no E85 around here

still going with the same turbo?

You may have areas under the curve being a lot smaller than stock within the first 3-4000 rpm?

Frs300 · 04-18-2013, 05:23 PM

Quote:

Originally Posted by s2d4

still going with the same turbo?

You may have areas under the curve being a lot smaller than stock within the first 3-4000 rpm?

yes going to keep the Garrett GTX2867

naikaidriver · 04-18-2013, 05:23 PM

This is going to kick so much a$$ they are going to have to import colons in from New Zealand to meet the demand!!

Thanks for the thread!

Scott

carbonBLUE · 04-18-2013, 07:35 PM

Quote:

Originally Posted by Xdragonxb0i

you may be the first non-race team to build the FA20, I think most are just boosting on a stock fa20

TherE Is A Built Frs In texas

SmsAlSuwaidi · 04-18-2013, 07:37 PM

Quote:

Originally Posted by carbonBLUE

TherE Is A Built Frs In texas

care to share info about it ?

Pete · 04-18-2013, 08:26 PM

I am excited to see your build. I would like to do the same to mine one day, although hopefully not under the same circumstances.

Also, congratulations on making something so cool after getting dealt the hand you had.

FasterpromsFRS · 04-19-2013, 12:14 AM

Quote:

Originally Posted by Frs300

more boost and pump gas...no E85 around here

Where are you located? There seems to be Thorntons going up in Tampa carrying E85 now, One was just built by my job so my brother is running only e85 in his GTR. I dont know how fast Thorntons are going up anywhere because I had never heard of them before.

ft_sjo · 04-19-2013, 12:21 AM

Quote:

Originally Posted by Frs300

yes going to keep the Garrett GTX2867

Is it going to get inspected before re-use?

FA20Club.com · 04-19-2013, 12:23 AM

already shipped it out to get check for internal damage. i got that part covered already.

04-18-2013, 04:47 PM	#61
Jahdai42 Bajan Yankee Join Date: Jan 2013 Drives: 2016 4-Runner Trail Location: Northern VA Posts: 237 Thanks: 101 Thanked 96 Times in 45 Posts Mentioned: 15 Post(s)	In for the outcome. __________________ Meh - I got nothing...

04-18-2013, 05:23 PM	#64
naikaidriver Senior Member Join Date: Aug 2012 Drives: 2013 Scion FR-S AT Asphalt Location: Lynnwood, WA Posts: 770 Thanks: 145 Thanked 673 Times in 289 Posts Mentioned: 13 Post(s)	This is going to kick so much a$$ they are going to have to import colons in from New Zealand to meet the demand!! Thanks for the thread! Scott __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Full Blown Stage 1 Short Block	FullBlown	Forced Induction	116	03-22-2019 07:29 PM
Full Blown 521hp Stock Motor @ 20psi	FullBlown	Forced Induction	276	08-31-2016 02:05 AM
How often to rebuild coilovers or stock shocks?	stockysnail	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	3	12-24-2012 12:54 PM
2013 FR-S / BRZ (The R&D has Begun)	Cotnoir	CANADA	10	06-26-2012 03:08 PM
PM Spammers, it's begun!	Beast	Off-Topic Lounge [WARNING: NO POLITICS]	11	01-30-2010 01:13 PM

04-18-2013, 08:26 PM	#67
Pete Senior Member Join Date: Aug 2012 Drives: 22 BRZ Location: Houston, TX Posts: 615 Thanks: 1,341 Thanked 478 Times in 230 Posts Mentioned: 15 Post(s)	I am excited to see your build. I would like to do the same to mine one day, although hopefully not under the same circumstances. Also, congratulations on making something so cool after getting dealt the hand you had.

04-19-2013, 12:23 AM	#70
FA20Club.com Banned Join Date: Aug 2012 Drives: 2013 White Out FR-S Location: Florida Posts: 1,335 Thanks: 24 Thanked 1,162 Times in 501 Posts Mentioned: 323 Post(s)	already shipped it out to get check for internal damage. i got that part covered already.

User Name		Remember Me?
Password