Wheel Directory: Enkei RPF1 18x9.5 +38 - Page 5 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

jmh · 01-24-2013, 07:12 AM

Quote:

Originally Posted by Paragon

Holy shit never knew they came in that size. Where are you getting it from and do they do 17x8 +35?

I'm getting them from autotechnik. I just looked up the sizes on the enkei site and ask them to bring them in. The design is slightly different depending on the width of the rim, the 9"+ rims are the ones with the really flat face.

http://www.enkei.com/size_chart/RPF1.pdf

ayetothejay · 01-25-2013, 11:29 AM

@Stance86 meaning to ask you? do you get any rubbing on your front tires when you go through bumps, etc? seems there's little clearance between your front tires and the fenders.

SkAsphalt · 01-25-2013, 04:18 PM

9.5 inches wide, does the car not feel slower? no one ever answers this question and I really want to now how are car copes with ~9" of tire

Skurj · 01-25-2013, 08:01 PM

Quote:

Originally Posted by SkAsphalt

9.5 inches wide, does the car not feel slower? no one ever answers this question and I really want to now how are car copes with ~9" of tire

Width of tire has nothing to do with 'speed or acceleration'

Weight yes, width no...

SkAsphalt · 01-26-2013, 04:31 PM

Quote:

Originally Posted by Skurj

Width of tire has nothing to do with 'speed or acceleration'

Weight yes, width no...

Width does matter. It is basic physics . grip = friction plus additional weight.

I say this because it effects bikes, why not cars? I want wider rims but I sorry about 9-9.5 being too wide. Plus you have to worry about scrubbing and clearances.

Stance86 · 01-27-2013, 04:14 AM

Quote:

Originally Posted by SkAsphalt

Width does matter. It is basic physics . grip = friction plus additional weight.

I say this because it effects bikes, why not cars? I want wider rims but I sorry about 9-9.5 being too wide. Plus you have to worry about scrubbing and clearances.

The car doesn't feel any slower in a straight line... it's always been slow and still is. The car does have too much grip now and isnt as playful as it used to be. The VSC seems to be more intrusive though which is interesting.. cuts in now just going around corners fast...

I repeat there is no rubbing or scrubbing at all. So whats to worry about?

Quote:

Originally Posted by wrohdejr

Looking at Enkei's size chart the 18x 9.5 +38 is 5x114.3?

http://www.enkei.com/size_chart/RPF1.pdf

Thats right, it's a custom order. They are not on the size chart.

Quote:

Originally Posted by Xdragonxb0i

With just lowering springs, would we have to buy control arms and other stuff to control the camber/ toe? I'm also interested in know if you scrape going over bumpy roads

It doesn't scrape or rub.

Metabrz · 01-31-2013, 06:19 AM

Installed today with Cusco Street Zero A Coil overs.

Metabrz · 02-10-2013, 03:43 AM

Quote:

Originally Posted by Timtamtt

They make rpf1s in this 18x9.5+38 for 5x100? Can't find it on the size chart for rpf1 on enkeis website I want a setttt

Ring them up. They are not on the charts but have been made. Good luck.

Stance86 · 02-10-2013, 04:27 AM

.

DarrenDriven · 03-01-2013, 12:31 AM

Merged another topic with the same wheels and same specs.

yohan04 · 03-02-2013, 10:48 PM

First WRB BRZ I believe with this set-up.

jammz · 04-11-2013, 12:35 AM

Hey fellas just wanted to share my frs with you guys

just wanted to say thanks to @FT-86 SpeedFactory for getting me these !

Current set up:

Enkei RPF1 SBC finishing
18x9.5 +38 all around with Falken Ziex 512 tires 225/40/18

*on a side note i didnt have to roll fenders at all

*

Enjoy

Side shot 1:

Side shot 2:

Rear Shot:

Overview of the front:

Update:

The pictures above was when i had tein coilovers with shorter springs installed in the front.. had a drop of 3inch -front and 2.5- rear

Recently Installed BC Coilovers w. the Extreme Drop kit.

Front fenders were slightly pulled, fender linings were cut. Still can go lower in the front. I have all 3 lock rings in the front and took 1 lock ring out in the rear.

ysr50guy · 04-11-2013, 12:43 AM

Looks really good! What coilovers are you on?

jammz · 04-11-2013, 12:48 AM

Quote:

Originally Posted by ysr50guy

Looks really good! What coilovers are you on?

thanks ! im on Tein Street Basis Coilovers with shorter springs in the front. maxed them out as soon as i got them installed.

current drop-
front: 3inches
rear: 2.5 ~ i say this cause from what tein says 2.3 is the max but with settling in should around 2.5.

02-10-2013, 04:27 AM	#65
Stance86 Member Join Date: Nov 2012 Drives: Toyota 86 GTS Location: Sydney, Australia Posts: 31 Thanks: 0 Thanked 23 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	. Attached Images

04-11-2013, 12:35 AM	#68
jammz Member Join Date: Dec 2012 Drives: '13 Scion FR-S Agento Location: New York Posts: 62 Thanks: 27 Thanked 30 Times in 14 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Enkei RPF1 SBC finishing Hey fellas just wanted to share my frs with you guys just wanted to say thanks to @FT-86 SpeedFactory for getting me these ! Current set up: Enkei RPF1 SBC finishing 18x9.5 +38 all around with Falken Ziex 512 tires 225/40/18 on a side note i didnt have to roll fenders at all Enjoy Side shot 1: Side shot 2: Rear Shot: Overview of the front: Update: The pictures above was when i had tein coilovers with shorter springs installed in the front.. had a drop of 3inch -front and 2.5- rear Recently Installed BC Coilovers w. the Extreme Drop kit. Front fenders were slightly pulled, fender linings were cut. Still can go lower in the front. I have all 3 lock rings in the front and took 1 lock ring out in the rear. Last edited by jammz; 04-25-2013 at 01:14 AM. Reason: mentioning a user

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheel Directory: Enkei RPF1 17x9.0 +35	D1cker	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	801	06-18-2024 07:31 AM
Wheel Directory: Enkei Raijin 18x8.5 +45 / 18x9.5 +45	GuerillaRacing	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	221	08-01-2019 11:30 AM
Enkei RPF1 18x9.5 5x100 38mm Offset Black Wheel - Exclusive Tony Angelo Edition Wheel	Infamous Performance	Wheels and Tires	122	02-13-2014 12:34 PM
WHITE Enkei NT03+M 18x9.5 / Enkei RPF1 17x9	Touge Factory	Wheels and Tires	2	02-05-2013 05:53 PM
F/S Enkei RPF1 5x114.3 18x9 +35 18X9.5 +38 with track tires	SsmoothyMonster	Wheels and Tires	17	09-24-2012 02:52 AM

01-25-2013, 11:29 AM	#58
ayetothejay Member Join Date: Jun 2012 Drives: 2013 Scion FR-S Location: SoCal Posts: 89 Thanks: 25 Thanked 24 Times in 19 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	@Stance86 meaning to ask you? do you get any rubbing on your front tires when you go through bumps, etc? seems there's little clearance between your front tires and the fenders.

03-02-2013, 10:48 PM	#67
yohan04 Senior Member Join Date: Oct 2012 Drives: Your sister Location: Maryland Posts: 160 Thanks: 49 Thanked 116 Times in 57 Posts Mentioned: 0 Post(s) Tagged: 2 Thread(s)	First WRB BRZ I believe with this set-up.

04-11-2013, 12:43 AM	#69
ysr50guy Member Join Date: May 2012 Drives: brz Location: CA Posts: 66 Thanks: 41 Thanked 31 Times in 12 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Looks really good! What coilovers are you on?

User Name		Remember Me?
Password