FA20CLUB 4-1 Modular Header.....Turbo Manifold DYNO TESTED

[reeves]

Originally Posted by swift996

The clip sounds great, exactly the type of sound I'd want.

Exactly what I thought when I heard my car for the first time as a bystander too! No need to buy an aftermarket cat-back anymore!

Originally Posted by swift996

Would you mind sharing your overpipe/front pipe setup/specs? I ordered the header and might want to do the same.

I just got ALL my parts from FA20club.. both he 2.5" overpipe & 2.5" resonated front pipe from them.. figured it'd save me some time & money, rather than piecing together different parts from different manufacturers.

Forgot to take pics of the overpipe though..

[Dimman]

Originally Posted by fenton

This is what I'm referring to.

http://www.ft86club.com/forums/showthread.php?p=703197

Sent from my Galaxy Nexus using Tapatalk 2

They both go forward and up, but pretty different designs as far as 4-1 vs 4-2-1. Plus significant differences in the power curves on the dyno show that no-one is copying anyone.

It's just a matter of similar use of the same limited space.

[reeves]

Originally Posted by Dimman

They both go forward and up, but pretty different designs as far as 4-1 vs 4-2-1. Plus significant differences in the power curves on the dyno show that no-one is copying anyone.

It's just a matter of similar use of the same limited space.

Yea there's only so many ways to route the pipe underneath the engine.. it's only got 2 places to go: stay underneath or come up in front of the engine, then there's only ONE place to exit, the overpipe area.. After a while, all headers are going to start looking the same, the more brands that come out.

[swift996]

Originally Posted by reeves

Yea there's only so many ways to route the pipe underneath the engine.. it's only got 2 places to go: stay underneath or come up in front of the engine, then there's only ONE place to exit, the overpipe area.. After a while, all headers are going to start looking the same, the more brands that come out.

Reeves, thanks for the pics. Something I didn't catch earlier, but the dyno is when you were running full E85?

[reeves]

Originally Posted by swift996

Reeves, thanks for the pics. Something I didn't catch earlier, but the dyno is when you were running full E85?

No problem.. Yes, I only did the dyno runs with E85.
I ran my tank down to almost empty.. filled back up with 13.01 gallons of E85, I was lucky I didn't run out of fuel on my way to the E85 station lol.

Officially, the flex fuel sensor said it was E76 when I did the dyno. I would've liked to have been able to do a 93 octane dyno, but just didn't have the time.. other people were waiting to use the dyno too.

[swift996]

Originally Posted by reeves

No problem.. Yes, I only did the dyno runs with E85.
I ran my tank down to almost empty.. filled back up with 13.01 gallons of E85, I was lucky I didn't run out of fuel on my way to the E85 station lol.

Officially, the flex fuel sensor said it was E76 when I did the dyno. I would've liked to have been able to do a 93 octane dyno, but just didn't have the time.. other people were waiting to use the dyno too.

Understood, I'm stuck with 93 octane. There isn't easy access to E85 locally for me. I read the first post wrong, I was thinking the dyno was before the tune. Oh well, I'm sure it will still add good power and flatten the torque curve.

[fenton]

Originally Posted by reeves

No problem.. Yes, I only did the dyno runs with E85.
I ran my tank down to almost empty.. filled back up with 13.01 gallons of E85, I was lucky I didn't run out of fuel on my way to the E85 station lol.

Officially, the flex fuel sensor said it was E76 when I did the dyno. I would've liked to have been able to do a 93 octane dyno, but just didn't have the time.. other people were waiting to use the dyno too.

Was the baseline e85 too or no?

Sent from my Galaxy Nexus using Tapatalk 2

[FA20Club.com]

baseline was pump 93 with only our CAI prior

[pixel67]

Cool concept, how much of a PITA to install?

Sent from my SPH-L710 using Tapatalk 2

[FA20Club.com]

for us about 15mins but we are ninjas

[Noob4Life]

@FA20Club.com

Is your site down? I'm trying to get on and just getting a 406 error.

[Pandle]

Originally Posted by Noob4Life

@FA20Club.com

Is your site down? I'm trying to get on and just getting a 406 error.

works for me. Might want to try clearing your cache or using a different browser. Ive been getting the same error on my pc. Also can't wait for mine!

[FA20Club.com]

Originally Posted by Noob4Life

@FA20Club.com

Is your site down? I'm trying to get on and just getting a 406 error.

just checked working fine clear your browser cache or try a different browser

[Noob4Life]

Originally Posted by Pandle

works for me. Might want to try clearing your cache or using a different browser. Ive been getting the same error on my pc. Also can't wait for mine!

Worked like a charm. Thanks!