Enkei rs05rr x rocket bunny - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

RocketBunny86ph · 03-15-2013, 09:18 AM

Hi guys, anyone knows how many MM spacer did they use for the enkei rs05rr in the red rocket bunny. And is it a 5x114 also. Thanks guys!
Currently building the same setup.
http://www.speedhunters.com/2012/10/...ket-bunny-frs/

Beyer Subaru · 03-15-2013, 10:35 AM

Quote:

Originally Posted by RocketBunny86ph

Hi guys, anyone knows how many MM spacer did they use for the enkei rs05rr in the red rocket bunny. And is it a 5x114 also. Thanks guys!
Currently building the same setup.
http://www.speedhunters.com/2012/10/...ket-bunny-frs/

Looks like it is at least 25mm. But it could be more, I'm not positive.

RocketBunny86ph · 03-15-2013, 10:57 AM

Quote:

Originally Posted by Beyer Subaru

Looks like it is at least 25mm. But it could be more, I'm not positive.

Thanks for the reply man. Kinda hard to sort out all of the stuffs that was used just to fit this setup/kit perfectly.

Beyer Subaru · 03-15-2013, 11:10 AM

Quote:

Originally Posted by RocketBunny86ph

Thanks for the reply man. Kinda hard to sort out all of the stuffs that was used just to fit this setup/kit perfectly.

Just always remember to measure twice and cut once.

Dooley · 03-15-2013, 11:12 AM

Quote:

Originally Posted by Beyer Subaru

Just always remember to measure twice and cut once.

I thought it was cut once, measure twice, eyeball more cuts.

EarlQHan · 03-15-2013, 11:13 AM

If you have the car, the kit, the suspension, and know the wheel size and offset it's fairly simple.
1. Mock up the fenders
2. Set the car's desired ride height and alignment
3. Measure the distance from the OEM wheel to the desired fender location
4. Do some simple math to figure how large of a spacer you need

Good luck

EarlQHan · 03-15-2013, 11:13 AM

Quote:

Originally Posted by Dooley

I thought it was cut once, measure twice, eyeball more cuts.

ebphoto · 03-15-2013, 11:44 AM

ask kei miura... he's on facebook. i'm sure he'd be more than happy to help.

RocketBunny86ph · 03-15-2013, 11:45 AM

Quote:

Originally Posted by EarlQHan

If you have the car, the kit, the suspension, and know the wheel size and offset it's fairly simple.
1. Mock up the fenders
2. Set the car's desired ride height and alignment
3. Measure the distance from the OEM wheel to the desired fender location
4. Do some simple math to figure how large of a spacer you need

Good luck

ordered parts :
Rocket bunny kit with gt wing
Enkei rs05rr 18x10 +30 front and 10x10.5 +22 rear
Bridgestone Tires 255/40 front 265/40 rear.
KW V3
Spacers 20mm front 30mm rear

Cross fingers. With this tho. Hoping everything will turn out as planned

Godzilla35 · 03-20-2013, 10:24 AM

Quote:

Originally Posted by RocketBunny86ph

ordered parts :
Rocket bunny kit with gt wing
Enkei rs05rr 18x10 +30 front and 10x10.5 +22 rear
Bridgestone Tires 255/40 front 265/40 rear.
KW V3
Spacers 20mm front 30mm rear

Cross fingers. With this tho. Hoping everything will turn out as planned

10x10.5 rear? haha... your build sounds sick! take some pics of the progress!

mnsayer · 01-30-2014, 01:45 AM

Quote:

Originally Posted by RocketBunny86ph

ordered parts :
Rocket bunny kit with gt wing
Enkei rs05rr 18x10 +30 front and 10x10.5 +22 rear
Bridgestone Tires 255/40 front 265/40 rear.
KW V3
Spacers 20mm front 30mm rear

Cross fingers. With this tho. Hoping everything will turn out as planned

Any pics of your build? As i am about to order the same wheels, wondering how did it go with the spacers as well?

raytrix · 01-30-2014, 02:55 PM

Quote:

Originally Posted by RocketBunny86ph

ordered parts :
Rocket bunny kit with gt wing
Enkei rs05rr 18x10 +30 front and 10x10.5 +22 rear
Bridgestone Tires 255/40 front 265/40 rear.
KW V3
Spacers 20mm front 30mm rear

Cross fingers. With this tho. Hoping everything will turn out as planned

I believe you need bigger spacers than that.

03-15-2013, 09:18 AM	#1
RocketBunny86ph Junior Member Join Date: Mar 2013 Drives: 2013 toyota ft86 Location: Philippines Posts: 7 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Enkei rs05rr x rocket bunny Hi guys, anyone knows how many MM spacer did they use for the enkei rs05rr in the red rocket bunny. And is it a 5x114 also. Thanks guys! Currently building the same setup. http://www.speedhunters.com/2012/10/...ket-bunny-frs/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheel Directory: Enkei RS05RR 18x8.5 +42	dabocx	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	206	03-02-2018 06:23 AM
Rocket Bunny FRS in Dubai	TAP Auto Parts	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	49	12-04-2012 02:39 PM
Subaru BRZ Rocket Bunny	Hawk77FT	AUSTRALIA	18	11-26-2012 04:35 AM
Red Rocket Bunny FR-S - Speedhunters	RaceR	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	5	10-12-2012 01:48 AM
Rocket Bunny or Modelista? HELP!!!	ShowstoppersUSA	Cosmetic Modification (Interior/Exterior/Lighting)	21	08-16-2012 02:23 PM

03-15-2013, 11:13 AM	#6
EarlQHan Senior Member Join Date: Nov 2012 Drives: Subarus Location: Nowhere Posts: 189 Thanks: 20 Thanked 129 Times in 66 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	If you have the car, the kit, the suspension, and know the wheel size and offset it's fairly simple. 1. Mock up the fenders 2. Set the car's desired ride height and alignment 3. Measure the distance from the OEM wheel to the desired fender location 4. Do some simple math to figure how large of a spacer you need Good luck

03-15-2013, 11:44 AM	#8
ebphoto Senior Member Join Date: Jun 2012 Drives: FR-S, NA8, S13 Location: Pensacola, FL Posts: 394 Thanks: 21 Thanked 201 Times in 91 Posts Mentioned: 13 Post(s) Tagged: 1 Thread(s)	ask kei miura... he's on facebook. i'm sure he'd be more than happy to help.

User Name		Remember Me?
Password