Enkei rs05rr x rocket bunny
 

Hi guys, anyone knows how many MM spacer did they use for the enkei rs05rr in the red rocket bunny. And is it a 5x114 also. Thanks guys!
Currently building the same setup.
http://www.speedhunters.com/2012/10/...ket-bunny-frs/

Looks like it is at least 25mm. But it could be more, I'm not positive.

Thanks for the reply man. Kinda hard to sort out all of the stuffs that was used just to fit this setup/kit perfectly.

Just always remember to measure twice and cut once.

I thought it was cut once, measure twice, eyeball more cuts.

If you have the car, the kit, the suspension, and know the wheel size and offset it's fairly simple.
1. Mock up the fenders
2. Set the car's desired ride height and alignment
3. Measure the distance from the OEM wheel to the desired fender location
4. Do some simple math to figure how large of a spacer you need

Good luck

:lol::bonk:

ask kei miura... he's on facebook. i'm sure he'd be more than happy to help.

ordered parts :
Rocket bunny kit with gt wing
Enkei rs05rr 18x10 +30 front and 10x10.5 +22 rear
Bridgestone Tires 255/40 front 265/40 rear.
KW V3
Spacers 20mm front 30mm rear

Cross fingers. With this tho. Hoping everything will turn out as planned
:happyanim:

10x10.5 rear? haha... your build sounds sick! take some pics of the progress!

Any pics of your build? As i am about to order the same wheels, wondering how did it go with the spacers as well?

I believe you need bigger spacers than that. :w00t: