Carbon Fiber Full Interior - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

chadstyle · 02-12-2013, 08:29 AM

Quote:

Those are sexy!

Who did this for you? Go opticoat those panels so they don't mar up easily.

Opticoat is snake oil...amazing how many people buy the hype. Waste of time and money.

CaptainSlow · 02-12-2013, 08:36 AM

Looks like you did a really good job. For me, it's a bit busy looking, but obviously styling is subjective.

chenshuo · 02-12-2013, 10:27 AM

Quote:

Originally Posted by jazztennor

I started a thread months ago of the process well it is finished and I thought i would post these nice pic that we took to show off the work. Let me know what you guys think about the work.

looks really nice! i think it'll look nice on a brz limited. how much did it cost you in total?

jazztennor · 02-12-2013, 11:26 AM

Quote:

Originally Posted by OmarGC

Nice mines actually getting done with all this in your pics + ac rings and upper drivers shroud

My a/c have been as well. Just didn't get then installed in time for the pics. I will post those new pics soon

OmarGC · 02-12-2013, 12:21 PM

Quote:

Originally Posted by DriftEightSix

Want pics!

Won't have my own installed pics until I get back to the states...

DriftEightSix · 02-12-2013, 04:24 PM

Quote:

Originally Posted by chadstyle

Opticoat is snake oil...amazing how many people buy the hype. Waste of time and money.

I'm guessing your car doesn't have any paint protection then?

Can we do a compassion of your car vs someone with it...

Just go poor some water over the hood record it... I'll do the same... we shall see

Books · 02-12-2013, 04:47 PM

Looks awesome!

doggy · 02-12-2013, 04:50 PM

Woo - welcome to the club

Why didn't you cut the hole on the steering wheel piece? Also - is it just me - or on the shifter piece - where the area is around the buttons - the edges on it are still in original plastic and not clear coated? When I did mine - I used some black paint and did a bit of fade out to black - so all the non CF covered places look black and not factory plastic grey

But all in all - looks super!

Also - how's the fitment on the pieces around HVAC? I thought about doing them in CF on mine too - but after some measuring - I found out that its not enough clearance for the pieces to be covered in CF in full...

jazztennor · 02-12-2013, 05:21 PM

Quote:

Originally Posted by doggy

Woo - welcome to the club

Why didn't you cut the hole on the steering wheel piece? Also - is it just me - or on the shifter piece - where the area is around the buttons - the edges on it are still in original plastic and not clear coated? When I did mine - I used some black paint and did a bit of fade out to black - so all the non CF covered places look black and not factory plastic grey

But all in all - looks super!

Also - how's the fitment on the pieces around HVAC? I thought about doing them in CF on mine too - but after some measuring - I found out that its not enough clearance for the pieces to be covered in CF in full...

He did the fade as well with black paint. And as for figment on HAVC it fits fine.

norsamerican · 02-12-2013, 05:28 PM

wait who is "he" that you speak of? I found a vendor from overseas that advertised selling these items on another website.

djliquidsteele · 02-12-2013, 09:17 PM

Would be REAL interested in these if the were in UniDirectional carbon instead of weave. I'd even send you my parts.

jazztennor · 02-12-2013, 11:59 PM

Quote:

Originally Posted by djliquidsteele

Would be REAL interested in these if the were in UniDirectional carbon instead of weave. I'd even send you my parts.

I can see if he can get his hands on unidirectional..

jazztennor · 02-13-2013, 12:00 AM

Quote:

Originally Posted by norsamerican

wait who is "he" that you speak of? I found a vendor from overseas that advertised selling these items on another website.

I have a local guy that im working with. He is the one that does all the work.

Jon11561 · 02-13-2013, 03:57 AM

How much did this cost? Will he ship?

02-12-2013, 08:36 AM	#16
CaptainSlow Senior Member Join Date: Oct 2012 Drives: 2013 Scion FR-S Location: Mid-Michigan Posts: 799 Thanks: 392 Thanked 388 Times in 180 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Looks like you did a really good job. For me, it's a bit busy looking, but obviously styling is subjective. __________________ Ultramarine 2013 Scion FR-S 6MT

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carbon Fiber Mirrors - Shark fin Antenna - Carbon Fiber Accessories-PRICES LISTED!!!	F-T	Exterior Parts - The Rest	285	08-24-2015 05:42 PM
Carbon Fiber dash like a BMW? (pictures of M3 carbon fiber interior included)	master345	Cosmetic Modification (Interior/Exterior/Lighting)	56	05-04-2014 12:10 PM
DCW Carbon Fiber interior items! Center console Plaques / Interior panels	doggy	Interior Parts (Incl. Lighting)	143	10-11-2013 12:17 PM
Carbon Fiber Interior Pieces	MrTranxD	Cosmetic Modification (Interior/Exterior/Lighting)	1	01-21-2013 06:45 PM

02-12-2013, 04:50 PM	#22
doggy Join Date: Jun 2012 Drives: Scion FRS Firestorm MT Location: Lithuania Posts: 327 Thanks: 4 Thanked 613 Times in 176 Posts Mentioned: 39 Post(s) Tagged: 1 Thread(s)	Woo - welcome to the club Why didn't you cut the hole on the steering wheel piece? Also - is it just me - or on the shifter piece - where the area is around the buttons - the edges on it are still in original plastic and not clear coated? When I did mine - I used some black paint and did a bit of fade out to black - so all the non CF covered places look black and not factory plastic grey But all in all - looks super! Also - how's the fitment on the pieces around HVAC? I thought about doing them in CF on mine too - but after some measuring - I found out that its not enough clearance for the pieces to be covered in CF in full...

02-12-2013, 05:28 PM	#24
norsamerican Senior Member Join Date: Jan 2013 Drives: WRB BRZ Location: Houston Posts: 539 Thanks: 101 Thanked 233 Times in 112 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	wait who is "he" that you speak of? I found a vendor from overseas that advertised selling these items on another website.

02-12-2013, 09:17 PM	#25
djliquidsteele Senior Member Join Date: Apr 2012 Drives: Scion FR-S Location: Louisville, KY Posts: 498 Thanks: 62 Thanked 130 Times in 92 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Would be REAL interested in these if the were in UniDirectional carbon instead of weave. I'd even send you my parts.

02-13-2013, 03:57 AM	#28
Jon11561 Member Join Date: Dec 2012 Drives: 2013 Scion Fr-S Location: Long beach, ny Posts: 36 Thanks: 0 Thanked 4 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	How much did this cost? Will he ship?

User Name		Remember Me?
Password