A warning about wheel studs - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Touge Factory · 11-29-2012, 12:10 PM

Quote:

Originally Posted by post_break

They were 10mm spacers.

ahhh... misread the +38 offset for 38mm spacers.

Hanakuso · 11-29-2012, 12:27 PM

Does anyone know if ARP sell studs in stock length?

post_break · 11-29-2012, 12:56 PM

Quote:

Originally Posted by Hanakuso

Does anyone know if ARP sell studs in stock length?

You should bite the bullet and contact them and post the info

bpracer · 11-29-2012, 07:42 PM

Pretty sure all the ARP stuff is 3" long, or 76mm.

A little too long for me, but have them on my racecar.

Vorschlag Motorports has some 65mm long studs, made in Italy. I have visited their shop (2 miles from my house) and they are going to start building stuff for FRS/BRZs. Their studs don't have the blank starter end like ARP though.

Haven't used them yet but I may put some small spacers on the rear soon.

Hanakuso · 11-29-2012, 07:59 PM

Quote:

Originally Posted by bpracer

Pretty sure all the ARP stuff is 3" long, or 76mm.

A little too long for me, but have them on my racecar.

Vorschlag Motorports has some 65mm long studs, made in Italy. I have visited their shop (2 miles from my house) and they are going to start building stuff for FRS/BRZs. Their studs don't have the blank starter end like ARP though.

Haven't used them yet but I may put some small spacers on the rear soon.

I know ARP makes studs around stock sizes for Hondas so I'm hoping they do for Subarus. I emailed them but haven't heard back yet.

bpracer · 11-29-2012, 09:01 PM

Quote:

Originally Posted by Hanakuso

I know ARP makes studs around stock sizes for Hondas so I'm hoping they do for Subarus. I emailed them but haven't heard back yet.

Should work:

http://www.rallysportdirect.com/ARP-...2-2011-WRX-STI

Hanakuso · 11-29-2012, 09:19 PM

Quote:

Originally Posted by bpracer

Should work:

http://www.rallysportdirect.com/ARP-...2-2011-WRX-STI

It says 1 inch longer then stock

bpracer · 11-29-2012, 09:29 PM

Quote:

Originally Posted by Hanakuso

It says 1 inch longer then stock

Sorry, didn't read you wanted shorter ones, ARP's 2013 catalog only lists the 3" length. They didn't have a listing for shorter ones as they do for Honda.

Dave-ROR · 11-30-2012, 12:07 AM

Quote:

Originally Posted by bpracer

Sorry, didn't read you wanted shorter ones, ARP's 2013 catalog only lists the 3" length. They didn't have a listing for shorter ones as they do for Honda.

This is correct. They only offer that one Subaru stud.

Jaylyons1 · 12-01-2012, 08:13 PM

Did you notice any performance differences with the spacers?

Jesse · 12-01-2012, 08:16 PM

i run ichiba adapters on both my cars daily with no problems

post_break · 12-02-2012, 06:23 PM

Quote:

Originally Posted by Jaylyons1

Did you notice any performance differences with the spacers?

Not yet, this is mostly for visual changes.

Jaylyons1 · 12-02-2012, 07:07 PM

Quote:

Originally Posted by post_break

Not yet, this is mostly for visual changes.

I was thinking about getting some myself but wanted to find out which ones were decent first. I imagine pushing it out an extra 20mm or so would really help with the look. I had 2 inch spacers on my Supra, but that was only because runnning 335's.

post_break · 12-02-2012, 08:47 PM

Quote:

Originally Posted by Jaylyons1

I was thinking about getting some myself but wanted to find out which ones were decent first. I imagine pushing it out an extra 20mm or so would really help with the look. I had 2 inch spacers on my Supra, but that was only because runnning 335's.

I'm thinking about 15-20mm in the rear and then I'll be putting 10mm in the front when I get an extra set of ARP studs.

12-01-2012, 08:16 PM	#25
Jesse wheel gap Join Date: Jun 2012 Drives: whiteout frs, 04 xrs Location: MA Posts: 555 Thanks: 460 Thanked 249 Times in 153 Posts Mentioned: 11 Post(s)	i run ichiba adapters on both my cars daily with no problems __________________ http://www.ft86club.com/forums/showthread.php?t=20039 - journal --- http://www.flickr.com/photos/29438365@N04/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MAX Spacer thickness for stock studs?	FRSpdDmn	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	21	06-09-2016 01:02 PM
broken wheel studs	Matt Andrews	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	3	11-06-2012 12:47 AM
Small wheel studs	PrinzJ	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	3	10-10-2012 04:47 PM
Bolt Pattern, Wheel Hubs and Studs	Jeff Lange	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	29	03-08-2012 02:49 AM
Are there any RWYB Wheel to Wheel road races?	LexusFman	Other Vehicles & General Automotive Discussions	1	11-05-2011 12:28 PM

11-29-2012, 12:27 PM	#16
Hanakuso Senior Member Join Date: Apr 2012 Drives: FR-S Location: California Posts: 1,956 Thanks: 294 Thanked 673 Times in 390 Posts Mentioned: 11 Post(s)	Does anyone know if ARP sell studs in stock length?

12-01-2012, 08:13 PM	#24
Jaylyons1 Senior Member Join Date: Nov 2012 Drives: 2022 WRB BRZ; 1993 Skyline GT-R Location: Pearl City, HI Posts: 977 Thanks: 331 Thanked 237 Times in 170 Posts Mentioned: 21 Post(s)	Did you notice any performance differences with the spacers?

User Name		Remember Me?
Password