Innovate Motorsports Twin Screw Supercharger Kit for FR-S/BRZ

[Draco-REX]

Originally Posted by MANDALAY

The runners are touching the block and heat will travel.

Phenolic Spacers.
http://www.grimmspeed.com/catalog/pr...products_id=54

[mines13]

Originally Posted by FreshFRS

very nice i want to run the biggest pump i can without too much weight though and cobra pumps seem to be working fine in some cars (mustang for example)
this is the pump i wanna use:http://www.xylemflowcontrol.com/mari...fugal-pump.htm :thumb up:

Did you mold those hoses?

[Mars2]

what about meziere pump?
http://www.meziere.com/displaycatego...id=244,352,372

[JoeBoxer]

You guys lost me, i think this and the Vortech threads need spin off threads of upgrades you can do to the kit, most people aren't going to re-engineer their FI system they just spend 4k on.

[FreshFRS]

Originally Posted by mines13

Did you mold those hoses?

that wasn't my picture but im going to run .75" teflon lined stainless flexible hoses i think.

[FreshFRS]

Originally Posted by Mars2

what about meziere pump?
http://www.meziere.com/displaycatego...id=244,352,372

looks to be a good one as well! might just have to take that one. i had a meziere on my S2k worked flawlessly.

[MANDALAY]

Originally Posted by FreshFRS

does now :happy0180:

Very good volume pump ! Just see that it can run for some time without the water just in case something happens

[MANDALAY]

Originally Posted by Draco-REX

Phenolic Spacers.
http://www.grimmspeed.com/catalog/pr...products_id=54

Heads up on spacers like that they are porous with many SW20 MR2's having them and only leaking oil out due to oil going in the plenum thru the PCV

[MANDALAY]

Originally Posted by mines13

Did you mold those hoses?

Yep , i have done a real lot.

Thats probably why i have been suggesting because of the experience i have gained

[MANDALAY]

Just remember number one rule with water pumps in a A/W set up the more the flow with good pressure the better. Also the bigger the line th better.

If you can fit 30 mm the best. The Johnson M90 that i have also has a model with bigger lines. DO NOT skimp here

[FreshFRS]

Originally Posted by MANDALAY

Just remember number one rule with water pumps in a A/W set up the more the flow with good pressure the better. Also the bigger the line th better.

If you can fit 30 mm the best. The Johnson M90 that i have also has a model with bigger lines. DO NOT skimp here

19-20mm should be sufficient for the size of the intercooler we will get with the Innovate supercharger kit. and im thinking the meziere pump should be sufficient as well.

[RedLeader]

Well, this thread went sideways fast. I hope Innovate releases some more info in the future about this kit, in the mean time this thread is mostly worthless.

[MANDALAY]

Originally Posted by RedLeader

Well, this thread went sideways fast. I hope Innovate releases some more info in the future about this kit, in the mean time this thread is mostly worthless.

Seriously ?

Common man look where i live. Where do you think they are getting the kit from ? America ?

[Draco-REX]

We've been spoiled by the Accelerated Performance threads and others like them. They had the parts in-hand, and involved the community (who would be buying the kit) in the build and development. These threads where a kit is announced, then goes back behind the curtain leave an information vacuum that the community will fill itself. If they want the focus to be on their product, they have to keep the information flowing.

Frankly, Innovate had a unit in their hands at SEMA. It should be on a car by now. Bullet has one of these unit (is the manufacturer of them?) but info from them is nigh non-existant also, and they've had one on a dyno. At this point, the only people who will buy one of these kits are those who want the "bling" of a manifold-mounted blower.