|
||||||
| Suspension | Chassis | Brakes -- Sponsored by 949 Racing Relating to suspension, chassis, and brakes. Sponsored by 949 Racing. |
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#113 |
|
Senior Member
Join Date: Jul 2012
Drives: FR-S
Location: Hawaii
Posts: 112
Thanks: 22
Thanked 14 Times in 13 Posts
Mentioned: 0 Post(s)
|
When can we expect the revised installation instructions to be out?
Sent from my SGH-T989 using Tapatalk 2 |
|
|
|
|
|
#114 |
|
Senior Member
Join Date: Mar 2012
Drives: 2013 WRB 6MT BRZ Ltd.
Location: Orlando, FL
Posts: 233
Thanks: 69
Thanked 80 Times in 53 Posts
Mentioned: 1 Post(s)
|
Still wondering if there's anything definitive discovered about the Whiteline strut tops and the popping noises.
I made extra sure that the springs lined up correctly at both ends before bolting the WL tops to the top. I also don't think camber is the issue, as I'm sitting at -2.1 in the front, and my tops have been set to max negative camber (viewed from the front of the car looking toward the back, each is set so the bolt is aligned at the back inner corner). The popping is still happening on both struts, depending on which way the wheel is turned. |
|
|
|
|
|
#115 |
|
Senior Member
Join Date: Mar 2012
Drives: BRZ DGM
Location: Maryland
Posts: 109
Thanks: 18
Thanked 30 Times in 21 Posts
Mentioned: 9 Post(s)
|
that explains how mint the place is lol. i kinda wish i had taken before photos, i was in hurry to get back for muay thai but heres a day after the install photo i took today. sorry for the darkness as its about to rain its ass off here.
|
|
|
|
|
|
#116 |
|
Senior Member
Join Date: Jul 2012
Drives: Whiteout FR-S
Location: Arkansas
Posts: 4,154
Thanks: 1,666
Thanked 1,627 Times in 997 Posts
Mentioned: 72 Post(s)
|
Damn that looks good, real Weds?
|
|
|
|
|
|
#118 |
|
Senior Member
Join Date: Jul 2012
Drives: Whiteout FR-S
Location: Arkansas
Posts: 4,154
Thanks: 1,666
Thanked 1,627 Times in 997 Posts
Mentioned: 72 Post(s)
|
They look good though, i'm not happy with my wheels guess i'm going to have to get something else.
|
|
|
|
|
|
#119 |
|
Senior Member
Join Date: Mar 2012
Drives: DGM BRZ, MR-S 3.5L V6 swap (sold)
Location: Bay Area, CA
Posts: 602
Thanks: 28
Thanked 188 Times in 121 Posts
Mentioned: 1 Post(s)
|
|
|
|
|
|
|
#120 |
|
Senior Member
Join Date: Mar 2012
Drives: BRZ DGM
Location: Maryland
Posts: 109
Thanks: 18
Thanked 30 Times in 21 Posts
Mentioned: 9 Post(s)
|
|
|
|
|
|
|
#121 | |
|
Curious cat.
Join Date: May 2012
Drives: 86 GT base M/T - Red
Location: Dubai
Posts: 775
Thanks: 840
Thanked 383 Times in 191 Posts
Mentioned: 31 Post(s)
|
Quote:
Unsure whether I'm going to bother with the Com-cs at this point until we get more concrete info. Could live with the -1.5 or so camber up front from the WL camber bolts alone if I have to (assuming they can get that much). For all I know everything might work just fine. Or not. Or I might have issues regardless. Will be a huge PITA for my installer because I'm going to be watching them like a hawk. Any clunking = redo. Too many factors. Waiting for RCE write up since they seem to know how to do it right.
__________________
2013 Toyota 86 GT M/T
2009 Renault Clio Sport R27 Team F1 Edition (sold) 1991 Mazda MX5 Miata (sold) 2007 Mitsubishi Evo 9 RS (sold) 2006 VW Golf R32 (sold) |
|
|
|
|
| The Following User Says Thank You to ultra For This Useful Post: | Delacruzmd (09-10-2012) |
|
|
#122 |
|
Senior Member
Join Date: May 2012
Drives: Silver AT Limited
Location: Seattle
Posts: 823
Thanks: 145
Thanked 344 Times in 159 Posts
Mentioned: 17 Post(s)
|
for me i'm sure its the top hats. the popping went away for me when the shop reinstalled the stock tops.
|
|
|
|
|
|
#123 |
|
Curious cat.
Join Date: May 2012
Drives: 86 GT base M/T - Red
Location: Dubai
Posts: 775
Thanks: 840
Thanked 383 Times in 191 Posts
Mentioned: 31 Post(s)
|
Bump for the 'official' RaceCompEngineering writeup.
:happy0180:
__________________
2013 Toyota 86 GT M/T
2009 Renault Clio Sport R27 Team F1 Edition (sold) 1991 Mazda MX5 Miata (sold) 2007 Mitsubishi Evo 9 RS (sold) 2006 VW Golf R32 (sold) |
|
|
|
|
|
#124 |
|
Senior Member
Join Date: Feb 2011
Drives: Ultramarine FR-S
Location: Irvine & Alhambra, California
Posts: 544
Thanks: 159
Thanked 211 Times in 113 Posts
Mentioned: 4 Post(s)
|
Driven the car about 200 miles now with the springs.
Started noticing a lot of clunking noise coming from the rear, especially the rear left side. Fronts are fine. It's not annoying but noticeable over low speeds. Unfortunately I'm traveling for the next 2 weeks so won't be able to take it bak to the shop to look into.
__________________
6.4.12 | Ultramarine | SoCal
|
|
|
|
|
|
#125 | |
|
Quote:
Instructions coming soon. |
||
|
|
|
|
|
#126 |
|
Senior Member
Join Date: Feb 2011
Drives: Ultramarine FR-S
Location: Irvine & Alhambra, California
Posts: 544
Thanks: 159
Thanked 211 Times in 113 Posts
Mentioned: 4 Post(s)
|
I'm out of country on vacation... i won't be able to call...Exchange on PM?
__________________
6.4.12 | Ultramarine | SoCal
|
|
|
|
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| White n' Yellow. | Asterisked Accolade | Wheels | Tires | Spacers | Hub -- Sponsored by The Tire Rack | 33 | 08-02-2015 04:01 AM |
| Yellow fog tint looks awesome! | DookDookDGM | BRZ Photos, Videos, Wallpapers, Gallery Forum | 37 | 11-07-2012 03:40 AM |
| RCE YELLOW Performance Lowering springs intro buy! RCE Suspension Starter Pack! | Racecomp Engineering | Brakes, Suspension, Chassis | 141 | 10-07-2012 08:12 PM |
| Amber Turn signals to yellow? | deedz | Cosmetic Modification (Interior/Exterior/Lighting) | 1 | 08-01-2012 02:44 AM |
| FT86s at Megaweb (more footage of the yellow 86) | ESBjiujitsu | FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum | 16 | 05-26-2012 02:08 PM |