follow ft86club on our blog, twitter or facebook.
FT86CLUB
Ft86Club
Speed By Design
Register Garage Community Calendar Today's Posts Search

Go Back   Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB > Technical Topics > Suspension | Chassis | Brakes -- Sponsored by 949 Racing

Suspension | Chassis | Brakes -- Sponsored by 949 Racing Relating to suspension, chassis, and brakes. Sponsored by 949 Racing.

Register and become an FT86Club.com member. You will see fewer ads

Reply
 
Thread Tools Search this Thread
Old 09-08-2012, 09:45 AM   #113
Toyobaru808
Senior Member
 
Join Date: Jul 2012
Drives: FR-S
Location: Hawaii
Posts: 112
Thanks: 22
Thanked 14 Times in 13 Posts
Mentioned: 0 Post(s)
When can we expect the revised installation instructions to be out?

Sent from my SGH-T989 using Tapatalk 2
Toyobaru808 is offline   Reply With Quote
Old 09-08-2012, 11:13 AM   #114
Smudgeous
Senior Member
 
Smudgeous's Avatar
 
Join Date: Mar 2012
Drives: 2013 WRB 6MT BRZ Ltd.
Location: Orlando, FL
Posts: 233
Thanks: 69
Thanked 80 Times in 53 Posts
Mentioned: 1 Post(s)
Garage
Still wondering if there's anything definitive discovered about the Whiteline strut tops and the popping noises.

I made extra sure that the springs lined up correctly at both ends before bolting the WL tops to the top.

I also don't think camber is the issue, as I'm sitting at -2.1 in the front, and my tops have been set to max negative camber (viewed from the front of the car looking toward the back, each is set so the bolt is aligned at the back inner corner). The popping is still happening on both struts, depending on which way the wheel is turned.
Smudgeous is offline   Reply With Quote
Old 09-08-2012, 04:26 PM   #115
Coastermikey
Senior Member
 
Join Date: Mar 2012
Drives: BRZ DGM
Location: Maryland
Posts: 109
Thanks: 18
Thanked 30 Times in 21 Posts
Mentioned: 9 Post(s)
Quote:
Originally Posted by Racecomp Engineering View Post
No worries man. You are probably the 5th customer to ever wait in there and we have been there 2 years. we dont do many installs, instead the shop is used for R&D and test fitting parts.

Myles
that explains how mint the place is lol. i kinda wish i had taken before photos, i was in hurry to get back for muay thai but heres a day after the install photo i took today. sorry for the darkness as its about to rain its ass off here.
Attached Images
 
Coastermikey is offline   Reply With Quote
Old 09-08-2012, 04:41 PM   #116
JoeBoxer
Senior Member
 
JoeBoxer's Avatar
 
Join Date: Jul 2012
Drives: Whiteout FR-S
Location: Arkansas
Posts: 4,154
Thanks: 1,666
Thanked 1,627 Times in 997 Posts
Mentioned: 72 Post(s)
Damn that looks good, real Weds?
JoeBoxer is offline   Reply With Quote
Old 09-08-2012, 04:47 PM   #117
Coastermikey
Senior Member
 
Join Date: Mar 2012
Drives: BRZ DGM
Location: Maryland
Posts: 109
Thanks: 18
Thanked 30 Times in 21 Posts
Mentioned: 9 Post(s)
Quote:
Originally Posted by JoeBoxer View Post
Damn that looks good, real Weds?
Lol no I wish, these are fake weds.
Coastermikey is offline   Reply With Quote
The Following User Says Thank You to Coastermikey For This Useful Post:
JoeBoxer (09-08-2012)
Old 09-08-2012, 05:03 PM   #118
JoeBoxer
Senior Member
 
JoeBoxer's Avatar
 
Join Date: Jul 2012
Drives: Whiteout FR-S
Location: Arkansas
Posts: 4,154
Thanks: 1,666
Thanked 1,627 Times in 997 Posts
Mentioned: 72 Post(s)
They look good though, i'm not happy with my wheels guess i'm going to have to get something else.
JoeBoxer is offline   Reply With Quote
Old 09-08-2012, 07:53 PM   #119
uspspro
Senior Member
 
Join Date: Mar 2012
Drives: DGM BRZ, MR-S 3.5L V6 swap (sold)
Location: Bay Area, CA
Posts: 602
Thanks: 28
Thanked 188 Times in 121 Posts
Mentioned: 1 Post(s)
Quote:
Originally Posted by Coastermikey View Post
Lol no I wish, these are fake weds.
Those are the "phat fux" right?

What size did you get? Looks good!
uspspro is offline   Reply With Quote
Old 09-08-2012, 08:05 PM   #120
Coastermikey
Senior Member
 
Join Date: Mar 2012
Drives: BRZ DGM
Location: Maryland
Posts: 109
Thanks: 18
Thanked 30 Times in 21 Posts
Mentioned: 9 Post(s)
Quote:
Originally Posted by uspspro View Post
Those are the "phat fux" right?

What size did you get? Looks good!
Yes sir, I bought the same size as Future's car. 18x9 +35
Coastermikey is offline   Reply With Quote
Old 09-09-2012, 05:42 AM   #121
ultra
Curious cat.
 
ultra's Avatar
 
Join Date: May 2012
Drives: 86 GT base M/T - Red
Location: Dubai
Posts: 775
Thanks: 840
Thanked 383 Times in 191 Posts
Mentioned: 31 Post(s)
Quote:
Originally Posted by Smudgeous View Post
Still wondering if there's anything definitive discovered about the Whiteline strut tops and the popping noises.

I made extra sure that the springs lined up correctly at both ends before bolting the WL tops to the top.

I also don't think camber is the issue, as I'm sitting at -2.1 in the front, and my tops have been set to max negative camber (viewed from the front of the car looking toward the back, each is set so the bolt is aligned at the back inner corner). The popping is still happening on both struts, depending on which way the wheel is turned.
AFAIK we still don't know for sure whether or not this is only affecting cars with the Whiteline top hats.

Unsure whether I'm going to bother with the Com-cs at this point until we get more concrete info. Could live with the -1.5 or so camber up front from the WL camber bolts alone if I have to (assuming they can get that much).

For all I know everything might work just fine. Or not. Or I might have issues regardless.

Will be a huge PITA for my installer because I'm going to be watching them like a hawk. Any clunking = redo.

Too many factors. Waiting for RCE write up since they seem to know how to do it right.
__________________
2013 Toyota 86 GT M/T
2009 Renault Clio Sport R27 Team F1 Edition (sold)
1991 Mazda MX5 Miata (sold)
2007 Mitsubishi Evo 9 RS (sold)
2006 VW Golf R32 (sold)
ultra is offline   Reply With Quote
The Following User Says Thank You to ultra For This Useful Post:
Delacruzmd (09-10-2012)
Old 09-09-2012, 03:26 PM   #122
mechaghost
Senior Member
 
mechaghost's Avatar
 
Join Date: May 2012
Drives: Silver AT Limited
Location: Seattle
Posts: 823
Thanks: 145
Thanked 344 Times in 159 Posts
Mentioned: 17 Post(s)
for me i'm sure its the top hats. the popping went away for me when the shop reinstalled the stock tops.
mechaghost is offline   Reply With Quote
Old 09-10-2012, 02:12 PM   #123
ultra
Curious cat.
 
ultra's Avatar
 
Join Date: May 2012
Drives: 86 GT base M/T - Red
Location: Dubai
Posts: 775
Thanks: 840
Thanked 383 Times in 191 Posts
Mentioned: 31 Post(s)
Bump for the 'official' RaceCompEngineering writeup. :happy0180:
__________________
2013 Toyota 86 GT M/T
2009 Renault Clio Sport R27 Team F1 Edition (sold)
1991 Mazda MX5 Miata (sold)
2007 Mitsubishi Evo 9 RS (sold)
2006 VW Golf R32 (sold)
ultra is offline   Reply With Quote
Old 09-11-2012, 12:03 AM   #124
r4m3n
Senior Member
 
r4m3n's Avatar
 
Join Date: Feb 2011
Drives: Ultramarine FR-S
Location: Irvine & Alhambra, California
Posts: 544
Thanks: 159
Thanked 211 Times in 113 Posts
Mentioned: 4 Post(s)
Garage
Driven the car about 200 miles now with the springs.

Started noticing a lot of clunking noise coming from the rear, especially the rear left side. Fronts are fine. It's not annoying but noticeable over low speeds.

Unfortunately I'm traveling for the next 2 weeks so won't be able to take it bak to the shop to look into.
__________________
6.4.12 | Ultramarine | SoCal
r4m3n is offline   Reply With Quote
Old 09-11-2012, 08:51 AM   #125
Racecomp Engineering
 
Join Date: Nov 2011
Drives: 2016 BRZ, 2012 Paris Di2 & 2018 STI
Location: Severn, MD
Posts: 5,520
Thanks: 3,542
Thanked 7,416 Times in 3,034 Posts
Mentioned: 311 Post(s)
Send a message via AIM to Racecomp Engineering
Quote:
Originally Posted by r4m3n View Post
Driven the car about 200 miles now with the springs.

Started noticing a lot of clunking noise coming from the rear, especially the rear left side. Fronts are fine. It's not annoying but noticeable over low speeds.

Unfortunately I'm traveling for the next 2 weeks so won't be able to take it bak to the shop to look into.
Shouldn't be any noise! Call us when you can.

Instructions coming soon.
Racecomp Engineering is offline   Reply With Quote
Old 09-12-2012, 02:23 AM   #126
r4m3n
Senior Member
 
r4m3n's Avatar
 
Join Date: Feb 2011
Drives: Ultramarine FR-S
Location: Irvine & Alhambra, California
Posts: 544
Thanks: 159
Thanked 211 Times in 113 Posts
Mentioned: 4 Post(s)
Garage
Quote:
Originally Posted by Racecomp Engineering View Post
Shouldn't be any noise! Call us when you can.

Instructions coming soon.
I'm out of country on vacation... i won't be able to call...Exchange on PM?
__________________
6.4.12 | Ultramarine | SoCal
r4m3n is offline   Reply With Quote
 
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
White n' Yellow. Asterisked Accolade Wheels | Tires | Spacers | Hub -- Sponsored by The Tire Rack 33 08-02-2015 04:01 AM
Yellow fog tint looks awesome! DookDookDGM BRZ Photos, Videos, Wallpapers, Gallery Forum 37 11-07-2012 03:40 AM
RCE YELLOW Performance Lowering springs intro buy! RCE Suspension Starter Pack! Racecomp Engineering Brakes, Suspension, Chassis 141 10-07-2012 08:12 PM
Amber Turn signals to yellow? deedz Cosmetic Modification (Interior/Exterior/Lighting) 1 08-01-2012 02:44 AM
FT86s at Megaweb (more footage of the yellow 86) ESBjiujitsu FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum 16 05-26-2012 02:08 PM


All times are GMT -4. The time now is 11:30 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.

Garage vBulletin Plugins by Drive Thru Online, Inc.