Syms Racing Intake - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Hanakuso · 09-06-2012, 02:37 PM

Looks to be a ram type intake and I like the use of the stock intake. Just wondering how much it will cost.

http://syms.jp/news/item.html

CBR600RR · 09-06-2012, 02:50 PM

looks oddly close to the edge of the foam bumper. The plastic of the front bumper is about a half a centimeter away from that, which i think would be pretty restrictive to airflow.

Hanakuso · 09-06-2012, 02:57 PM

Quote:

Originally Posted by CBR600RR

looks oddly close to the edge of the foam mumper. The plastil of the front bumper is about a half a centimeter away from that, which i think would be pretty restrictive to airflow.

That's how many intakes for the S2000 were such as the Mugen intake but it proved to be very effective on that platform at least.

whitejdm · 09-06-2012, 03:08 PM

interesting to see them replace the sound tube with a carbon resonator instead of just deleting it all together.

This will not be cheap.

Spartan65 · 09-06-2012, 03:12 PM

Yeah this piece will be expensive, when some one makes one out of rota formed plastic I might be able to afford it, the CFM will go through the roof, definitely a required tune item. I would have put air straighteners on the front to give some structure rigidity IMO.

Draco-REX · 09-06-2012, 03:14 PM

The original resonator is gone too. I would worry about that. I'd want to see MAF readings around idle and off-idle. If the sound tube or that optional resonator isn't enough to cancel the resonance in the intake tube it could cause a part-throttle bog.

JoeBoxer · 09-06-2012, 03:34 PM

Looks nice but why go to all that trouble and expense and leave the factory accordian tube?

Genomaxter · 09-06-2012, 04:42 PM

The ridges on a stock intake actually have a purpose. I read somewhere is has to do with sound resonance coming from the intake manifold from teh valves closing. I will need to find those articles again. Must confirm.

wootwoot · 09-06-2012, 06:11 PM

Someone PLEASE make this out of plastic!!!! I think this will be the best performing intake upgrade for the platform. Whoever makes an affordable model out of plastic will sell a TON of them. Is anyone listening?!?! Now go get to work!

I like the engineering here. Every other intake system we have so far is just a filter on the end of a chunk of tubing. Sometimes it has a box or heat shield around it depending on where you buy. I'm in for updates on his one...

Turdinator · 09-06-2012, 09:28 PM

Best looking intake mod I've yet seen. The change in resonators is interesting.

choi0706 · 09-07-2012, 01:11 AM

This is what I'm looking for

wootwoot · 09-07-2012, 01:19 AM

Make one out of plastic NOW!!!

uspspro · 09-07-2012, 02:23 AM

This + Perrin drop-in seems like a good plan... waiting to see results

gmookher · 09-07-2012, 02:24 AM

Quote:

Originally Posted by uspspro

This + Perrin drop-in seems like a good plan... waiting to see results

ding

ding

ding

we have a winner

you said it, and got it RIGHT!

09-06-2012, 02:37 PM	#1
Hanakuso Senior Member Join Date: Apr 2012 Drives: FR-S Location: California Posts: 1,956 Thanks: 294 Thanked 673 Times in 390 Posts Mentioned: 11 Post(s) Tagged: 2 Thread(s)	Syms Racing Intake Looks to be a ram type intake and I like the use of the stock intake. Just wondering how much it will cost. http://syms.jp/news/item.html

09-06-2012, 02:50 PM	#2
CBR600RR Senior Member Join Date: Jul 2012 Drives: Raven Black Location: Ottawa, Canada Posts: 1,343 Thanks: 451 Thanked 563 Times in 276 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	looks oddly close to the edge of the foam bumper. The plastic of the front bumper is about a half a centimeter away from that, which i think would be pretty restrictive to airflow. Last edited by CBR600RR; 09-19-2012 at 03:39 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
cold air intake vs short ram intake ?	tnt	Engine, Exhaust, Transmission	5	02-02-2014 01:43 AM
HKS Racing Suction Intake for BRZ/FR-S at Redline360	Redline360	Engine, Exhaust, Bolt-Ons	0	07-20-2012 01:21 AM
BC Racing, Cusco, HKS, KW Suspension, Eibach, All available at Enjuku Racing!	Enjuku Racing	Brakes, Suspension, Chassis	16	07-06-2012 09:22 PM

09-06-2012, 03:08 PM	#4
whitejdm Senior Member Join Date: Dec 2011 Drives: BRZ prem. Location: Edmonton AB Posts: 250 Thanks: 20 Thanked 35 Times in 29 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	interesting to see them replace the sound tube with a carbon resonator instead of just deleting it all together. This will not be cheap.

09-06-2012, 03:14 PM	#6
Draco-REX Corner Junkie Join Date: Feb 2012 Drives: 13 BRZ, 11 STI, 99 RS Location: Ohio Posts: 2,908 Thanks: 129 Thanked 1,521 Times in 702 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	The original resonator is gone too. I would worry about that. I'd want to see MAF readings around idle and off-idle. If the sound tube or that optional resonator isn't enough to cancel the resonance in the intake tube it could cause a part-throttle bog.

09-06-2012, 03:34 PM	#7
JoeBoxer Senior Member Join Date: Jul 2012 Drives: Whiteout FR-S Location: Arkansas Posts: 4,154 Thanks: 1,666 Thanked 1,627 Times in 997 Posts Mentioned: 72 Post(s) Tagged: 0 Thread(s)	Looks nice but why go to all that trouble and expense and leave the factory accordian tube?

09-06-2012, 04:42 PM	#8
Genomaxter Senior Member Join Date: Mar 2012 Drives: 2013 firestorm FRS Location: Slidell Posts: 147 Thanks: 3 Thanked 25 Times in 18 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	The ridges on a stock intake actually have a purpose. I read somewhere is has to do with sound resonance coming from the intake manifold from teh valves closing. I will need to find those articles again. Must confirm.

09-06-2012, 06:11 PM	#9
wootwoot Senior Member Join Date: Jul 2012 Drives: FRS Location: Cali Posts: 1,558 Thanks: 188 Thanked 462 Times in 264 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Someone PLEASE make this out of plastic!!!! I think this will be the best performing intake upgrade for the platform. Whoever makes an affordable model out of plastic will sell a TON of them. Is anyone listening?!?! Now go get to work! I like the engineering here. Every other intake system we have so far is just a filter on the end of a chunk of tubing. Sometimes it has a box or heat shield around it depending on where you buy. I'm in for updates on his one...

09-07-2012, 01:11 AM	#11
choi0706 Senior Member Join Date: Mar 2012 Drives: t Location: United States Posts: 446 Thanks: 14 Thanked 56 Times in 36 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	This is what I'm looking for

09-07-2012, 01:19 AM	#12
wootwoot Senior Member Join Date: Jul 2012 Drives: FRS Location: Cali Posts: 1,558 Thanks: 188 Thanked 462 Times in 264 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Make one out of plastic NOW!!!

09-07-2012, 02:23 AM	#13
uspspro Senior Member Join Date: Mar 2012 Drives: DGM BRZ, MR-S 3.5L V6 swap (sold) Location: Bay Area, CA Posts: 602 Thanks: 28 Thanked 188 Times in 121 Posts Mentioned: 1 Post(s) Tagged: 1 Thread(s)	This + Perrin drop-in seems like a good plan... waiting to see results

User Name		Remember Me?
Password