Wheel Directory: SSR Professor SP3 19x8.5 +?? / 19x9.5 +?? - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

stoneman155 · 09-04-2012, 12:59 PM

He is not willing to reveal his offsets because he has worked so hard to find out what works. However, if you order through Garage 88, he will supply the correct wheel offset for flush stance

DarrenDriven · 09-04-2012, 01:41 PM

Aw gawd, not another one of these. How HARD did he work? Did he have to break into an underground vault to reveal the holy specs while a team of undercover agents tried to stop him?

@stoneman155 thanks for posting the photo, not calling you out, just the idiots that want to keep basic specs a secret.

stoneman155 · 09-05-2012, 05:30 PM

Yeah, finding the right offset isn't quite like keeping engine specs secret. Bad customer service if you ask me. I'm working on getting these wheels ordered from a local vendor. They're going to work with me to get the right fitment/offset. As soon as they're in and on, I'll post up so everyone has the flush specs

coyote · 09-05-2012, 07:18 PM

I can see both sides of this argument, however if stoneman is buying these wheels from a local vendor, why is he wasting the time of an Australian store owner with questions about a product he has no intention of buying from him?

Some people will sell you anything. They do no research, hold no stock and just make a small clip by being the middle man for a product that is drop shipped from goodness knows where. They'll tell you anything they know, because that's not very much, most of it wrong and in the end it's buyer beware.

Others do their own research in order to ensure customers get stuff that works, fits, etc. This bloke is my local vendor and if that's poor customer service, then I'm loving it.

JDMSushi · 09-05-2012, 08:58 PM

I have specs somewhere saved on my laptop... ill see if I can dig em up.

Remember though, these are 3 piece and are custom ordered to your specs. There are definitely better specs out there than the fitment he's ordered here.

stoneman155 · 09-05-2012, 10:39 PM

@JDMSushi I'd love to see the specs if you can dig them up. @coyote I definitely see the other side of the argument. It does make a lot of sense. However, it's always nice to see someone willing to help out regardless of the situation. Which is what we see a lot of on this forum, and I enjoy that. I was actually considering buying from garage 88 and paying for the ridiculous shipping because he was being so friendly, but once I told him I was from the United States, he did not reply back. Either way, he was helpful up to the point of letting me know what specs I'd be getting.

coyote · 09-05-2012, 11:40 PM

I can definitely see what you're saying, I just know for a fact that many people over the years have pumped that guy for info only to then run off and buy it from a faceless online retailer in order to save $20. We are talking about hundreds, not just a few.

I hope you get it sorted, they are great looking wheels.

JDMSushi · 09-06-2012, 12:01 AM

Quote:

Originally Posted by stoneman155

He is not willing to reveal his offsets because he has worked so hard to find out what works. However, if you order through Garage 88, he will supply the correct wheel offset for flush stance

Given from the feedback I heard from mates at wtac that's their standard attitude. Plus If it was such a secret he would have removed the stickers from the wheel barrel...

Enigmus · 09-06-2012, 01:49 AM

Forgot those fools who wanna keep offsets a secret. Don't list them and let this topic go into limbo until someone else shares that info in a different thread. Plus remove that OTHER listing that dragged out several pages on keeping offsets a secret.

joshontilt · 03-27-2013, 09:49 PM

Quote:

Originally Posted by coyote

I can see both sides of this argument, however if stoneman is buying these wheels from a local vendor, why is he wasting the time of an Australian store owner with questions about a product he has no intention of buying from him?

Some people will sell you anything. They do no research, hold no stock and just make a small clip by being the middle man for a product that is drop shipped from goodness knows where. They'll tell you anything they know, because that's not very much, most of it wrong and in the end it's buyer beware.

Others do their own research in order to ensure customers get stuff that works, fits, etc. This bloke is my local vendor and if that's poor customer service, then I'm loving it.

Agreed. I can understand peoples frustration at some Tuner's not revealing information but after seeing it from their perspective and receiving the customer service from the people who own this car, I couldn't be anymore impressed with their work and as such, I would go back to them every time because of it.

DarrenDriven · 06-24-2013, 02:08 AM

Giving up on getting the specs for these wheels. Just ridiculous.

JDMSushi · 07-20-2013, 02:18 AM

Quote:

Originally Posted by DarrenDriven

Giving up on getting the specs for these wheels. Just ridiculous.

F: 19 x 8.5 +35 (10mm spacer)
R: 19 x 9.5 +43 (15mm spacer)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheels similar to Technic mesh wheels on bmw's	DYOLF26	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	10	04-26-2017 11:29 AM
Which 18" wheels will weigh the same or less than the stock wheels?	mickey177	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	32	05-16-2013 04:07 PM
Wheels, Wheels, Wheels \| Island Import Performance	IslandImportPerformance	Wheels and Tires	4	07-31-2012 11:08 PM
Konig Wheels \| Sexy Wheels at Low Prices	IslandImportPerformance	Wheels and Tires	0	07-25-2012 04:56 PM
Forgestar wheels, great wheels at great prices!!!!	IslandImportPerformance	Wheels and Tires	0	06-15-2012 06:03 PM

09-04-2012, 12:59 PM	#15
stoneman155 Member Join Date: Aug 2012 Drives: 2013 Scion FR-S, Whiteout Location: Park City, UT Posts: 55 Thanks: 37 Thanked 37 Times in 12 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	He is not willing to reveal his offsets because he has worked so hard to find out what works. However, if you order through Garage 88, he will supply the correct wheel offset for flush stance

09-05-2012, 05:30 PM	#17
stoneman155 Member Join Date: Aug 2012 Drives: 2013 Scion FR-S, Whiteout Location: Park City, UT Posts: 55 Thanks: 37 Thanked 37 Times in 12 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Yeah, finding the right offset isn't quite like keeping engine specs secret. Bad customer service if you ask me. I'm working on getting these wheels ordered from a local vendor. They're going to work with me to get the right fitment/offset. As soon as they're in and on, I'll post up so everyone has the flush specs

09-05-2012, 07:18 PM	#18
coyote Senior Member Join Date: Oct 2011 Drives: Slowly Location: brisbane.qld.au Posts: 1,064 Thanks: 212 Thanked 539 Times in 235 Posts Mentioned: 21 Post(s) Tagged: 1 Thread(s)	I can see both sides of this argument, however if stoneman is buying these wheels from a local vendor, why is he wasting the time of an Australian store owner with questions about a product he has no intention of buying from him? Some people will sell you anything. They do no research, hold no stock and just make a small clip by being the middle man for a product that is drop shipped from goodness knows where. They'll tell you anything they know, because that's not very much, most of it wrong and in the end it's buyer beware. Others do their own research in order to ensure customers get stuff that works, fits, etc. This bloke is my local vendor and if that's poor customer service, then I'm loving it.

09-05-2012, 08:58 PM	#19
JDMSushi Senior Member Join Date: Jul 2012 Drives: JDM86 Location: Sydney Posts: 223 Thanks: 81 Thanked 50 Times in 30 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	I have specs somewhere saved on my laptop... ill see if I can dig em up. Remember though, these are 3 piece and are custom ordered to your specs. There are definitely better specs out there than the fitment he's ordered here.

09-05-2012, 10:39 PM	#20
stoneman155 Member Join Date: Aug 2012 Drives: 2013 Scion FR-S, Whiteout Location: Park City, UT Posts: 55 Thanks: 37 Thanked 37 Times in 12 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	@JDMSushi I'd love to see the specs if you can dig them up. @coyote I definitely see the other side of the argument. It does make a lot of sense. However, it's always nice to see someone willing to help out regardless of the situation. Which is what we see a lot of on this forum, and I enjoy that. I was actually considering buying from garage 88 and paying for the ridiculous shipping because he was being so friendly, but once I told him I was from the United States, he did not reply back. Either way, he was helpful up to the point of letting me know what specs I'd be getting.

09-05-2012, 11:40 PM	#21
coyote Senior Member Join Date: Oct 2011 Drives: Slowly Location: brisbane.qld.au Posts: 1,064 Thanks: 212 Thanked 539 Times in 235 Posts Mentioned: 21 Post(s) Tagged: 1 Thread(s)	I can definitely see what you're saying, I just know for a fact that many people over the years have pumped that guy for info only to then run off and buy it from a faceless online retailer in order to save $20. We are talking about hundreds, not just a few. I hope you get it sorted, they are great looking wheels.

09-06-2012, 01:49 AM	#23
Enigmus Senior Member Join Date: Feb 2012 Drives: 1996 Integra LS 4DR, 2013 Scion FRS Location: New Orleans Posts: 191 Thanks: 6 Thanked 269 Times in 47 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Forgot those fools who wanna keep offsets a secret. Don't list them and let this topic go into limbo until someone else shares that info in a different thread. Plus remove that OTHER listing that dragged out several pages on keeping offsets a secret.

User Name		Remember Me?
Password