Visconti Tuning - Latest BRZ Flash Info - Page 63 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Visconti · 08-31-2012, 08:50 PM

Quote:

Originally Posted by choi0706

the tapping sound is me pressing the pedal.. I dont know what version my car came with..

You have a tune?

In the video you have a CEL - did you read the code? Car is in limp mode because of the CEL

JimmyMac · 08-31-2012, 10:11 PM

Quote:

Originally Posted by JimmyMac

Thanks John for the flash this morning. I didn't get a chance to upload it till after my teaching job, but had to go to my other job afterwards so I had no time to post up anything. Anyways, it's a little wet out here. Didn't get too much of a chance to run the car through, but I can feel a difference in the tune. Yes, it will do 60 in 2nd gear. The torque dip is more transparent. The car feels better/faster as you go up in the gears. The car also sounds different. I dunno, I'll have to listen better when I have more time with the car.

Question, you sent us 2 files. One was "your" tune and the other was the "stock" tune. (Correct?) If I had to flash back to stock, do I have to contact you so that I can reflash your tune back into my car? (Meaning, do you need to open up a flash license again?) Also, is it safe assume that you will open up new flash license when there is an update to your tune like flat foot shifting, changeable maps, etc..

Anyways, thanks again. Keep up the good work. Someday I'll hit you up for the E85 tune. Maybe when this tune wears off... hehe

John, just quoting my post. Can I keep flashing my ECU from stock to your map back and forth as many times as I want without you resetting my licenses? If you want a reason, I'll PM it to you. Anyways, tonight I need to do some data logs to sort out a problem.

choi0706 · 08-31-2012, 10:28 PM

Quote:

Originally Posted by Visconti

You have a tune?

In the video you have a CEL - did you read the code? Car is in limp mode because of the CEL

I have a p0019.. It did this before the code as well..

NotSoJDM · 08-31-2012, 10:34 PM

Why would you ever flash your ecu when you have an existing cel?

ruskymx · 08-31-2012, 10:40 PM

That's one of the camshaft codes isn't it?

cobrabyte · 08-31-2012, 10:42 PM

Quote:

Originally Posted by ruskymx

That's one of the camshaft codes isn't it?

Yep, looks like the cam issue.

See: http://www.ft86club.com/forums/showthread.php?p=401458

ill86 · 08-31-2012, 11:12 PM

Quote:

Originally Posted by Memphis

116 OCTANE! RACE GAS FTW

Leaded? That's what are 116 is.
No e85 close though...

Visconti · 08-31-2012, 11:44 PM

Quote:

Originally Posted by JimmyMac

John, just quoting my post. Can I keep flashing my ECU from stock to your map back and forth as many times as I want without you resetting my licenses? If you want a reason, I'll PM it to you. Anyways, tonight I need to do some data logs to sort out a problem.

Yup - flash away - no problems

Quote:

Originally Posted by choi0706

I have a p0019.. It did this before the code as well..

OK - you need to flash back to stock and go to the dealer.

Did I send you the stock rom for your car?

Quote:

Originally Posted by ruskymx

That's one of the camshaft codes isn't it?

yup - no good.

Quote:

Originally Posted by cobrabyte

Yep, looks like the cam issue.

See: http://www.ft86club.com/forums/showthread.php?p=401458

yup

Lee358 · 08-31-2012, 11:51 PM

@Visconti is there going to be a valet mode in the on the fly map switching? I seem to recall some one saying something about it.

Visconti · 08-31-2012, 11:56 PM

Quote:

Originally Posted by Lee358

@Visconti is there going to be a valet mode in the on the fly map switching? I seem to recall some one saying something about it.

Yup at some point - lots of stuff to do first.

Yruyur · 09-01-2012, 12:12 AM

Quote:

Originally Posted by choi0706

I have a p0019.. It did this before the code as well..

I would try a copy of my flash that john has from my replacement ecu that fixed my p0019. Curious if it would fix it.

Sent from my PH44100 using Tapatalk 2

Memphis · 09-01-2012, 12:12 AM

Quote:

Originally Posted by ill86

Leaded? That's what are 116 is.
No e85 close though...

I believe it is unleaded. I think...

xjohnx · 09-01-2012, 12:15 AM

Quote:

Originally Posted by Memphis

I believe it is unleaded. I think...

might want to make sure before your cats become a clogged mess.

Memphis · 09-01-2012, 12:18 AM

Quote:

Originally Posted by xjohnx

might want to make sure before your cats become a clogged mess.

What cats?

JK I know. Going to take the car to track on the 14th for road course driver ed

Find out then.

08-31-2012, 10:40 PM	#873
ruskymx Senior Member Join Date: Oct 2011 Drives: 13 HotLava FRS, 93 4Runner, 97 Taco Location: Orwigsburg, PA Posts: 407 Thanks: 96 Thanked 351 Times in 113 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	That's one of the camshaft codes isn't it? __________________ Jeff R @ Freedom Toyota-Scion My FRS Blog My Facebook Page for work. Rusky's Motocross Pics My YouTube Channel w/ FRS Vids

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LED Front Signals with Resistor Flash Correctors	DarrenDriven	Cosmetic Modification (Interior/Exterior/Lighting)	38	09-20-2012 03:05 PM
Brz Info/Specs (helpful info for questions asked often)	Gaen	BRZ First-Gen (2012+) — General Topics	0	05-24-2012 11:09 PM
How to embed a flash gallery?	DarrenDriven	Site Announcements / Questions / Issues	2	04-24-2012 08:43 PM
Production Spec Subaru BRZ Previewed at National Conference & Latest Info/Rumors	blur	BRZ First-Gen (2012+) — General Topics	130	09-01-2011 02:42 PM

08-31-2012, 11:51 PM	#877
Lee358 Senior Member Join Date: Jun 2012 Drives: nissan frontier, DGM MT BRZ Location: North nj Posts: 1,576 Thanks: 404 Thanked 419 Times in 254 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	@Visconti is there going to be a valet mode in the on the fly map switching? I seem to recall some one saying something about it.

User Name		Remember Me?
Password