|
||||||
| Suspension | Chassis | Brakes -- Sponsored by 949 Racing Relating to suspension, chassis, and brakes. Sponsored by 949 Racing. |
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#15 |
|
Senior Member
Join Date: May 2012
Drives: 13' SSM BRZ
Location: Alaska
Posts: 250
Thanks: 21
Thanked 72 Times in 52 Posts
Mentioned: 6 Post(s)
|
I got a hold of subtle solutions, and they replied with
1. Can you take a picture of the front top hats from inside the engine bay? 2. Are the front top hat studs M8 in size? 2. Measure the center to center distance of each stud located on 1 of the front top hats. I'm assuming there are 3 studs per top hat w/ hex nuts on them. 3. Determine how many studs are located on the rear top hats. I assume (2), but it could be (3) per top hat. 4. Are the rear top hat studs larger (M10) than the ones in the front? 5. Measure the distance from center of stud to center of stud on one of the rear top hats. 6. Take a picture of the rear top hats (as many different shots as possible, from the top and bottom) Anyone can help with that? I'm literally 5000 miles aways from my brz at the moment ..
|
|
|
|
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Coilover to Raise Ride Height | Furtive | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 48 | 07-28-2014 12:57 PM |