Fog Light Bezel Blank or CAD Model - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Bergycheese348 · 04-04-2024, 05:58 PM

Hello,
Looking to see if there is an actual FR-S foglight bezel blank for sale or CAD model of the OEM foglight bezel. I essentially want to get rid of the hole that is in the bezel due to the foglight. I have CAD experience and am more than fine making one to 3D print, but do not have access to a 3D scanner. In the end I want it to be flat outside of the indicator, similar to what is on the Griffon bumper.

Joon525 · 04-11-2024, 11:14 AM

https://phxspec.com/products/scion-f...g-light-delete
Not sure how reputable this company is but you can try them out.

Bergycheese348 · 04-15-2024, 12:26 PM

Quote:

Originally Posted by Joon525

https://phxspec.com/products/scion-f...g-light-delete
Not sure how reputable this company is but you can try them out.

Besides being reputable, cannot find any of their contact info. That is close to what I want (no option for turn signal), but if they would be able to provide the car file to modify id pay them the $20 or so the blemished ones cost.

Joon525 · 04-15-2024, 12:29 PM

Quote:

Originally Posted by Bergycheese348

Besides being reputable, cannot find any of their contact info. That is close to what I want (no option for turn signal), but if they would be able to provide the car file to modify id pay them the $20 or so the blemished ones cost.

If you have Instagram you can try messaging them on there.
https://www.instagram.com/phx.spec/

It is strange that there's no contact info on their site.

Bergycheese348 · 04-15-2024, 12:38 PM

Quote:

Originally Posted by Joon525

If you have Instagram you can try messaging them on there.
https://www.instagram.com/phx.spec/

It is strange that there's no contact info on their site.

Yeah, already messaged them there. On their 'terms' page they have a list of terms and then "contact info"...with no info haha

Bergycheese348 · 04-15-2024, 12:56 PM

Quote:

Originally Posted by Joon525

If you have Instagram you can try messaging them on there.
https://www.instagram.com/phx.spec/

It is strange that there's no contact info on their site.

Can report that they are not willing to sell the CAD file (nor the OEM bezel file)

04-04-2024, 05:58 PM	#1
Bergycheese348 Senior Member Join Date: Apr 2020 Drives: TRD Supercharged 2016 FR-S Location: Minnesota/Michigan Posts: 133 Thanks: 22 Thanked 69 Times in 36 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Fog Light Bezel Blank or CAD Model Hello, Looking to see if there is an actual FR-S foglight bezel blank for sale or CAD model of the OEM foglight bezel. I essentially want to get rid of the hole that is in the bezel due to the foglight. I have CAD experience and am more than fine making one to 3D print, but do not have access to a 3D scanner. In the end I want it to be flat outside of the indicator, similar to what is on the Griffon bumper. __________________ "Ooh, hang on. That is the throb of a turbocharged flat four engine. A sound which, all over the world, heralds the imminent arrival of a moran" -Jeremy Clarkson T RD, Verus, Ace

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: FR-S OEM Fog Light Bezel	KDad2	Want-To-Buy Requests	2	01-01-2019 10:09 PM
WTB fog light bezel (oem)	carlovestela	Want-To-Buy Requests	0	07-23-2018 08:12 PM
Wtb frs fog light bezel	turtlefeeder	Want-To-Buy Requests	1	06-05-2017 01:52 AM
FS: OEM Fog Light Bezel, OEM Turn Signal Housings, and OEM Reverse Light Assembly	zeal86	Exterior Parts (Aero, Lighting, Etc.)	15	05-29-2016 11:01 PM
FS: Oem fog light/bezel	nguyen_er	Exterior Parts (Aero, Lighting, Etc.)	8	09-18-2013 06:01 PM

04-11-2024, 11:14 AM	#2
Joon525 Senior Member Join Date: Jun 2016 Drives: 2016 BRZ Location: NJ Posts: 369 Thanks: 55 Thanked 166 Times in 108 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	https://phxspec.com/products/scion-f...g-light-delete Not sure how reputable this company is but you can try them out.

User Name		Remember Me?
Password