Fog Light Bezel Blank or CAD Model
 

Hello,
Looking to see if there is an actual FR-S foglight bezel blank for sale or CAD model of the OEM foglight bezel. I essentially want to get rid of the hole that is in the bezel due to the foglight. I have CAD experience and am more than fine making one to 3D print, but do not have access to a 3D scanner. In the end I want it to be flat outside of the indicator, similar to what is on the Griffon bumper.

https://phxspec.com/products/scion-f...g-light-delete
Not sure how reputable this company is but you can try them out.

Besides being reputable, cannot find any of their contact info. That is close to what I want (no option for turn signal), but if they would be able to provide the car file to modify id pay them the $20 or so the blemished ones cost.

If you have Instagram you can try messaging them on there.
https://www.instagram.com/phx.spec/

It is strange that there's no contact info on their site.

Yeah, already messaged them there. On their 'terms' page they have a list of terms and then "contact info"...with no info haha

Can report that they are not willing to sell the CAD file (nor the OEM bezel file)