FR-S Debadging Tutorial - Page 10 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Trojan_SC · 07-31-2012, 12:42 AM

Quote:

Originally Posted by eriktherod

As much as I wish the steering wheel was mod-able (at least the logo portion), and it will bother me being the last Scion piece, I am still rebadging it Toyota on the front/rear and wheel caps.

Maybe eventually I'll give in and get the JDM steering wheel in red trim but not likely.

See pic above.

Trojan_SC · 07-31-2012, 12:43 AM

Quote:

Originally Posted by imravenit

huh? I already put goo gone and im having a hard time taking it off

You mean the bumper appliqué right? Just start peeling it off at the edge and pull hard lol. Seriously. It just peels off don't need Goo gone.

imravenit · 07-31-2012, 12:49 AM

Quote:

Originally Posted by Trojan_SC

You mean the bumper appliqué right? Just start peeling it off at the edge and pull hard lol. Seriously. It
just peels off don't need Goo gone.

So try to just peel off from the side of the letters?

Trojan_SC · 07-31-2012, 12:54 AM

Quote:

Originally Posted by imravenit

So try to just peel off from the side of the letters?

No. Look closely at the whole thing. It's a strip of clear bra with the letter printed on it. Find the edge of it and peel from there.

AlexT · 07-31-2012, 01:01 AM

I know this is an FR-S Debadging Tutorial, But could someone tell me if the toyota logo would fit over the subaru logo? everywhere i look its a scion debadging just curious if its possible for the brz

Trojan_SC · 07-31-2012, 01:03 AM

Quote:

Originally Posted by AlexT

I know this is an FR-S Debadging Tutorial, But could someone tell me if the toyota logo would fit over the subaru logo? everywhere i look its a scion debadging just curious if its possible for the brz

Pretty sure it can be done considering both cars are practically identical.

Trojan_SC · 07-31-2012, 01:16 AM

Quote:

Originally Posted by lbroskee

For 750+ that is def not a airbag solution in my book lol

Eh, looks 10000x better than any other alternative. But to each their own. :happy0180:

lbroskee · 07-31-2012, 01:47 AM

Quote:

Originally Posted by Trojan_SC

Eh, looks 10000x better than any other alternative. But to each their own. :happy0180:

o i totally agree, but at that price i could go buy a catback. its just alot of money for a "badge swap"

Trojan_SC · 07-31-2012, 01:54 AM

Quote:

Originally Posted by lbroskee

o i totally agree, but at that price i could go buy a catback. its just alot of money for a "badge swap"

Much truth! I'll just do both.

imravenit · 07-31-2012, 01:56 AM

Quote:

Originally Posted by Trojan_SC

No. Look closely at the whole thing. It's a strip of clear bra with the letter printed on it. Find the edge of it and peel from there.

Haha took me awhile to find the edge i was too focus on the edges of the lettering.. stood back a bit since im getting frustrated.. N blah saw a slight shadow of line at the very edge of the whole thing just below the right or left corner of the trunk door.. Thanks man! Finally done!

Trojan_SC · 07-31-2012, 01:58 AM

Quote:

Originally Posted by imravenit

Haha took me awhile to find the edge i was too focus on the edges of the lettering.. stood back a bit since im getting frustrated.. N blah saw a slight shadow of line at the very edge of the whole thing just below the right or left corner of the trunk door.. Thanks man! Finally done!

Nice! Good work!

imravenit · 07-31-2012, 02:28 AM

So i followed the flossing technique... I did not use a blow dryer.. I was afraid if i heat it up a bit i might chip the paint specially in the front badge..

Tools used:

1. Applied goo gone around badges..

2. Flossed badges in a sawing motion while pulling towards me

3. Quick waxed after all goos are gone!

(notice the reflection and tell me what you see!)

KRAZYK · 08-02-2012, 10:46 AM

Debadged the FRS and the Tundra yesterday.. my fingers are sore from rolling up all that adhesive haha.

Method that worked for me was:
-Heat up the emblem slightly with a heat gun or hair dryer
-use some fishing line (and gloves) and using a saw motion back and forth, cut the adhesive behind the emblem.
-Use your fingers to roll/peel the left over glue
-Use some Goo-Gone to remove any left over glue
-Use some spay polish to make the area nice and clean

Now I just have to order some Toyota emblems..

KRAZYK · 08-02-2012, 10:51 AM

Anyone know where to get these emblems?

I looked for Carson Toyota on the search but his threads show up as inactive.. maybe he got banned?

07-31-2012, 02:28 AM	#138
imravenit give us this day Join Date: Jul 2012 Drives: AE86 - FRS Location: Three Stars & A Sun Posts: 404 Thanks: 138 Thanked 161 Times in 37 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	So i followed the flossing technique... I did not use a blow dryer.. I was afraid if i heat it up a bit i might chip the paint specially in the front badge.. Tools used: 1. Applied goo gone around badges.. 2. Flossed badges in a sawing motion while pulling towards me 3. Quick waxed after all goos are gone! (notice the reflection and tell me what you see!) __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Debadging - How difficult will it be?	Dadhawk	Scion FR-S / Toyota 86 GT86 General Forum	86	06-24-2014 11:49 PM

07-31-2012, 01:01 AM	#131
AlexT Member Join Date: Jul 2012 Drives: 2013 BRZ Location: Kansas Posts: 33 Thanks: 0 Thanked 3 Times in 3 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	I know this is an FR-S Debadging Tutorial, But could someone tell me if the toyota logo would fit over the subaru logo? everywhere i look its a scion debadging just curious if its possible for the brz

08-02-2012, 10:46 AM	#139
KRAZYK Self Entitled Join Date: Jul 2012 Drives: 13' Red FR-S, 12' Toyota Tundra Location: Dallas, TX Posts: 122 Thanks: 17 Thanked 13 Times in 13 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Debadged the FRS and the Tundra yesterday.. my fingers are sore from rolling up all that adhesive haha. Method that worked for me was: -Heat up the emblem slightly with a heat gun or hair dryer -use some fishing line (and gloves) and using a saw motion back and forth, cut the adhesive behind the emblem. -Use your fingers to roll/peel the left over glue -Use some Goo-Gone to remove any left over glue -Use some spay polish to make the area nice and clean Now I just have to order some Toyota emblems..

08-02-2012, 10:51 AM	#140
KRAZYK Self Entitled Join Date: Jul 2012 Drives: 13' Red FR-S, 12' Toyota Tundra Location: Dallas, TX Posts: 122 Thanks: 17 Thanked 13 Times in 13 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Anyone know where to get these emblems? I looked for Carson Toyota on the search but his threads show up as inactive.. maybe he got banned?

User Name		Remember Me?
Password