WHAT DID YOU DO TO YOUR FRS TODAY? - Page 1635 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

new2subaru · 03-05-2021, 06:43 PM

A bit installed. Getting my feet wet. The top side, bottom corner mucked up a bit. I think the seam folded over underneath. I used double sided after that to secure it. Not my side lol

Stonehorsw · 03-05-2021, 10:38 PM

Instalei Pedal extension. Kind of confined place to install, but thanks to the experience from others, I did check which were the best and smallest tools that I could use. Took me 15 minutes and Inam not mechanically inclined.

theneptune86 · 03-06-2021, 09:57 AM

Mounted and wired my reverse light pod. Also test fitted the TRD style spoiler that I recently had painted up. Very excited to get the spoiler installed finally, scared to drill, but excited still. (Dunno why pic with spoiler goes upside down when I upload...)

alex87f · 03-06-2021, 12:20 PM

Quote:

Originally Posted by Stonehorsw

Instalei Pedal extension. Kind of confined place to install, but thanks to the experience from others, I did check which were the best and smallest tools that I could use. Took me 15 minutes and Inam not mechanically inclined.

I found it a heck of a lot easier to just remove the pedal altogether ;-)

Stonehorsw · 03-06-2021, 01:01 PM

Quote:

Originally Posted by alex87f

I found it a heck of a lot easier to just remove the pedal altogether ;-)

Yes, this was one of the alternatives, probably quicker than the way I did.

Most of people I saw trying, they used plyers and stuff like that. I just got a very small wrench and allen key and it was fine. Did not have issues reaching any location.

BrahmaBull1990 · 03-06-2021, 04:25 PM

Corsa exhaust is installed! Man it sounds mean, coupled with the Tomei UEL header. It is a bit loud when you stomp on it, but I love it.

StraightOuttaCanadaEh · 03-06-2021, 04:38 PM

Quote:

Originally Posted by BrahmaBull1990

Corsa exhaust is installed! Man it sounds mean, coupled with the Tomei UEL header. It is a bit loud when you stomp on it, but I love it.

that must be deafening

BrahmaBull1990 · 03-06-2021, 04:39 PM

Quote:

Originally Posted by StraightOuttaCanadaEh

that must be deafening

Not bad, actually. I kept the stock catted front pipe. When I drove home I needed room for the stock exhaust and had the back seats down - that was deafening.

It is okay now with the seats up. Also, Corsa isn’t known for being deafening, that’s why I grabbed this one and not like a Tomei Xpreme

StraightOuttaCanadaEh · 03-06-2021, 04:43 PM

Quote:

Originally Posted by BrahmaBull1990

Not bad, actually. I kept the stock catted front pipe. When I drove home I needed room for the stock exhaust and had the back seats down - that was deafening.

It is okay now with the seats up. Also, Corsa isn’t known for being deafening, that’s why I grabbed this one and not like a Tomei Xpreme

I know it's known for being deafening when paired with a catless header. I've had it on my car for 4 years now and still enjoy it. I like the sound so much that I feel like pairing it with a header, especially UEL, would ruin that delicious howl.

BrahmaBull1990 · 03-06-2021, 04:46 PM

Quote:

Originally Posted by StraightOuttaCanadaEh

I know it's known for being deafening when paired with a catless header. I've had it on my car for 4 years now and still enjoy it. I like the sound so much that I feel like pairing it with a header, especially UEL, would ruin that delicious howl.

It sounds so mean, which is exactly what I wanted. I live in a small town, so I’ll need to shift sooner when it’s late

FLIPDADY · 03-06-2021, 08:38 PM

Loaded her up so I could head to the shop and slap on some newer rubber on her

Sent from my LM-G900 using Tapatalk

BrahmaBull1990 · 03-07-2021, 01:07 PM

Finally did my after video today:

The first video here my BRZ with stock exhaust behind my Tomei UEL header and overpipe:

Here is my final exhaust setup I finished yesterday; Tomei UEL header/over pipe, stock catted front pipe, and Corsa catback exhaust:

Sorry for the weird angles

humfrz · 03-07-2021, 03:05 PM

Quote:

Originally Posted by FLIPDADY

Loaded her up so I could head to the shop and slap on some newer rubber on her...........

Wait one ....... I count 8 tires (used) plus 4 that's on your car? You're going to the shop to get 4 new tires?

How many wheels does your car have?

FLIPDADY · 03-07-2021, 03:48 PM

One rim is brand new and the other 3 have worn out rubber

Sent from my LM-G900 using Tapatalk

03-05-2021, 06:43 PM	#22877
new2subaru Weight Weenie Join Date: Aug 2015 Drives: 15 FR-S Location: Canada Posts: 2,660 Thanks: 5,238 Thanked 2,434 Times in 1,397 Posts Mentioned: 12 Post(s) Tagged: 0 Thread(s)	A bit installed. Getting my feet wet. The top side, bottom corner mucked up a bit. I think the seam folded over underneath. I used double sided after that to secure it. Not my side lol Attached Images

03-05-2021, 10:38 PM	#22878
Stonehorsw Senior Member Join Date: Jul 2020 Drives: 18 Brz (Sold) / 22 BRZ Location: Michigan Posts: 671 Thanks: 1,139 Thanked 445 Times in 261 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Cusco pedal extension Instalei Pedal extension. Kind of confined place to install, but thanks to the experience from others, I did check which were the best and smallest tools that I could use. Took me 15 minutes and Inam not mechanically inclined. Attached Images

03-06-2021, 04:25 PM	#22882
BrahmaBull1990 Howdy Join Date: Feb 2021 Drives: 2020 BRZ PP Location: Snohomish, WA Posts: 589 Thanks: 1,271 Thanked 446 Times in 248 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Corsa exhaust is installed! Man it sounds mean, coupled with the Tomei UEL header. It is a bit loud when you stomp on it, but I love it. __________________ There's a point at 7,000 RPM... where everything fades. The machine becomes weightless. Just disappears. And all that's left is a body moving through space and time. 7,000 RPM. That's where you meet it. You feel it coming. It creeps up on you, close in your ear. Asks you a question. The only question that matters. Who are you?

03-07-2021, 01:07 PM	#22888
BrahmaBull1990 Howdy Join Date: Feb 2021 Drives: 2020 BRZ PP Location: Snohomish, WA Posts: 589 Thanks: 1,271 Thanked 446 Times in 248 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Finally did my after video today: The first video here my BRZ with stock exhaust behind my Tomei UEL header and overpipe: Here is my final exhaust setup I finished yesterday; Tomei UEL header/over pipe, stock catted front pipe, and Corsa catback exhaust: Sorry for the weird angles __________________ There's a point at 7,000 RPM... where everything fades. The machine becomes weightless. Just disappears. And all that's left is a body moving through space and time. 7,000 RPM. That's where you meet it. You feel it coming. It creeps up on you, close in your ear. Asks you a question. The only question that matters. Who are you?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saw My First FR-S Today	Marrk	Scion FR-S / Toyota 86 GT86 General Forum	26	05-15-2013 01:40 PM
Got My Car Today!!!!! First 86!! #81	Juanito08	Scion FR-S / Toyota 86 GT86 General Forum	7	05-22-2012 05:54 PM
If my FRS was here already, today I would...	bestwheelbase	Scion FR-S / Toyota 86 GT86 General Forum	101	05-12-2012 07:20 PM
Sat in a FRS today!!	Ladnerd	Scion FR-S / Toyota 86 GT86 General Forum	12	04-30-2012 02:48 PM
Got my VIN today...	Enemies	BRZ First-Gen (2012+) — General Topics	63	04-12-2012 11:19 PM

03-06-2021, 08:38 PM	#22887
FLIPDADY Member Join Date: Jan 2017 Drives: 2015 Subaru BRZ Sport Tech Location: Toronto Posts: 89 Thanks: 148 Thanked 80 Times in 36 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Loaded her up so I could head to the shop and slap on some newer rubber on her Sent from my LM-G900 using Tapatalk

03-07-2021, 03:48 PM	#22890
FLIPDADY Member Join Date: Jan 2017 Drives: 2015 Subaru BRZ Sport Tech Location: Toronto Posts: 89 Thanks: 148 Thanked 80 Times in 36 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	One rim is brand new and the other 3 have worn out rubber Sent from my LM-G900 using Tapatalk

User Name		Remember Me?
Password