WHAT DID YOU DO TO YOUR FRS TODAY? - Page 1630 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Wally86 · 02-08-2021, 09:58 AM

Quote:

Originally Posted by auryn79

Bled/replaced the clutch fluid and did clutch pedal adjustments due to possible clutch dragging. Did not work and still will not shift into 1st or reverse when engine is on. Not sure what to do next.

How many miles? That's always been a sign to me that a pressure plate was failing.

MJones_RB · 02-08-2021, 02:30 PM

New set of tires. Bridgestone S-04 Pole Position 215/45 R17s.

I liked my Michelin Pilot Super Sports but they don't offer that size anymore.

auryn79 · 02-08-2021, 05:40 PM

Quote:

Originally Posted by Wally86

How many miles? That's always been a sign to me that a pressure plate was failing.

140k
Put in a new Clutch Kit FX300 last February.

Shop is going to look at it this Wednesday.

arxm · 02-10-2021, 09:08 PM

so I tried to look and couldn't find an straight answer and didnt think it worth to start a new thread so ill ask here.

I have a K&N panel filter and I found a perrin intake tube for sale, the one from the filter box to tb, would I need to calibrate my maf if I installed it. I dont have an OFT or anything so I dont want to buy the tube if I cant really use it.

jflogerzi · 02-10-2021, 11:35 PM

Quote:

Originally Posted by arxm

so I tried to look and couldn't find an straight answer and didnt think it worth to start a new thread so ill ask here.

I have a K&N panel filter and I found a perrin intake tube for sale, the one from the filter box to tb, would I need to calibrate my maf if I installed it. I dont have an OFT or anything so I dont want to buy the tube if I cant really use it.

If its this one: Then Yes MAF needs to be re-scaled
https://www.perrin.com/shop/air-indu...old-air-intake

If this one: Then no tune adjustments are needed
https://www.perrin.com/shop/air-indu...brz-inlet-hose

arxm · 02-11-2021, 06:41 AM

Quote:

Originally Posted by jflogerzi

If its this one: Then Yes MAF needs to be re-scaled
https://www.perrin.com/shop/air-indu...old-air-intake

If this one: Then no tune adjustments are needed
https://www.perrin.com/shop/air-indu...brz-inlet-hose

its this one

aFe Power TT-2016B Takeda Black Torque Booster Tube (Non-CARB Compliant) https://www.amazon.ca/dp/B0168Y8G9I/...ing=UTF8&psc=1

also i don't see people talk much about the different ones, perrin, mishimoto, takeda etc I guess they're all the same mainly?

Cephas · 02-11-2021, 07:56 AM

Quote:

Originally Posted by arxm

its this one

aFe Power TT-2016B Takeda Black Torque Booster Tube (Non-CARB Compliant) https://www.amazon.ca/dp/B0168Y8G9I/...ing=UTF8&psc=1

also i don't see people talk much about the different ones, perrin, mishimoto, takeda etc I guess they're all the same mainly?

Yeah, not a lot of difference in the tubes. As long as the airbox itself is unmodified you should be fine without MAF rescaling.

arxm · 02-11-2021, 10:07 AM

thanks guys!

jflogerzi · 02-11-2021, 10:09 AM

Basically of the stock box and maf is not relocated. The tube does nothing. Just modify the OEM to clean up the engine bay.

Sent from my GM1915 using Tapatalk

DarkSunrise · 02-11-2021, 03:40 PM

I like the mishimoto one because it retains the resonator chamber. They did multiple dyno runs with and without it and found it adds a few hp above 7000 rpm. From what I’ve seen, resonator chambers aren’t there for sound but rather to help reduce the slowing of intake air velocity from resonance or reversion. Not sure if that’s true or not but since they had the dyno sheets to show it, I figure why not.

Purist · 02-12-2021, 02:03 AM

Quote:

Originally Posted by arxm

also i don't see people talk much about the different ones, perrin, mishimoto, takeda etc I guess they're all the same mainly?

Because their effect is minimal, there's not much to discuss. It's a cosmetic thing.

Sent from my SM-G973F using Tapatalk

FLIPDADY · 02-14-2021, 01:32 AM

Went 1 piece today. Fitment is just right.

FT86MS overpipe and front pipe combo

Sent from my LM-G900 using Tapatalk

mrg666 · 02-15-2021, 01:03 PM

Replaced the steering wheel.

RToyo86 · 02-15-2021, 02:08 PM

Quote:

Originally Posted by FLIPDADY

Went 1 piece today. Fitment is just right.

FT86MS overpipe and front pipe combo

Sent from my LM-G900 using Tapatalk

They're doing full exhaust now header back.
I haven't checked the site to see if headers are listed yet but I was told about 2 months ago when I went into the their store that it's coming.

02-10-2021, 09:08 PM	#22810
arxm Senior Member Join Date: Jan 2017 Drives: 2013 FR-S, 2023 BRZ Location: Toronto Posts: 249 Thanks: 108 Thanked 74 Times in 46 Posts Mentioned: 0 Post(s)	so I tried to look and couldn't find an straight answer and didnt think it worth to start a new thread so ill ask here. I have a K&N panel filter and I found a perrin intake tube for sale, the one from the filter box to tb, would I need to calibrate my maf if I installed it. I dont have an OFT or anything so I dont want to buy the tube if I cant really use it. __________________ 2013 Whiteout FRS 6MT with a JRSC @ 330ish WHP on E98 2023 Ignition Red BRZ 6MT awaiting boost

02-11-2021, 10:07 AM	#22814
arxm Senior Member Join Date: Jan 2017 Drives: 2013 FR-S, 2023 BRZ Location: Toronto Posts: 249 Thanks: 108 Thanked 74 Times in 46 Posts Mentioned: 0 Post(s)	thanks guys! __________________ 2013 Whiteout FRS 6MT with a JRSC @ 330ish WHP on E98 2023 Ignition Red BRZ 6MT awaiting boost

02-11-2021, 03:40 PM	#22816
DarkSunrise Senior Member Join Date: Apr 2012 Drives: 22 BRZ (Previously 13 FR-S) Location: USA Posts: 5,798 Thanks: 2,187 Thanked 4,243 Times in 2,221 Posts Mentioned: 48 Post(s)	I like the mishimoto one because it retains the resonator chamber. They did multiple dyno runs with and without it and found it adds a few hp above 7000 rpm. From what I’ve seen, resonator chambers aren’t there for sound but rather to help reduce the slowing of intake air velocity from resonance or reversion. Not sure if that’s true or not but since they had the dyno sheets to show it, I figure why not. __________________ "Never run out of real estate, traction, and ideas at the same time." 2022 BRZ Build 2013 FR-S Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saw My First FR-S Today	Marrk	Scion FR-S / Toyota 86 GT86 General Forum	26	05-15-2013 12:40 PM
Got My Car Today!!!!! First 86!! #81	Juanito08	Scion FR-S / Toyota 86 GT86 General Forum	7	05-22-2012 04:54 PM
If my FRS was here already, today I would...	bestwheelbase	Scion FR-S / Toyota 86 GT86 General Forum	101	05-12-2012 06:20 PM
Sat in a FRS today!!	Ladnerd	Scion FR-S / Toyota 86 GT86 General Forum	12	04-30-2012 01:48 PM
Got my VIN today...	Enemies	BRZ First-Gen (2012+) — General Topics	63	04-12-2012 10:19 PM

02-14-2021, 01:32 AM	#22818
FLIPDADY Member Join Date: Jan 2017 Drives: 2015 Subaru BRZ Sport Tech Location: Toronto Posts: 89 Thanks: 148 Thanked 80 Times in 36 Posts Mentioned: 1 Post(s)	Went 1 piece today. Fitment is just right. FT86MS overpipe and front pipe combo Sent from my LM-G900 using Tapatalk

User Name		Remember Me?
Password