xcelir8brz's Stock Intake Tube Rubber Delete - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

xcelir8brz · 07-24-2012, 10:34 PM

Quote:

Originally Posted by StarsGarrador

Why you live so far away lol

FR-S Twin and myself, working on some other ideas. This weekend/next weekend should be interesting. We're looking at stage 2 and stage 3 on top of what we got.

*KID* · 07-25-2012, 02:47 PM

nice work. how much would this run for

Bg8780 · 07-26-2012, 11:26 AM

xcelir8brz, If you are building these for sale I would definitely be interested. Would it be possible to paint the couplers red (same red as Perrin's lightweight pulley) instead of black? If so, how much would I be looking at shipped?

Great mod and looking forward to your future projects! Cheers!

xcelir8brz · 07-26-2012, 12:38 PM

Quote:

Originally Posted by Bg8780

xcelir8brz, If you are building these for sale I would definitely be interested. Would it be possible to paint the couplers red (same red as Perrin's lightweight pulley) instead of black? If so, how much would I be looking at shipped?

Great mod and looking forward to your future projects! Cheers!

PM'd you!

xcelir8brz · 07-26-2012, 12:46 PM

Next weekend, I'll have time to fabricate a few more tubes.

I'll also be working with TBBandit (FR-S) to make a different intake system based on this design. What we will do is build a new extended pipe, connect it to the throttle body with a coupler, will be longer by a few inches towards the front of the car, then a 90 degree coupler on that towards the drivers side, a MAF adapter, then a cone filter. We will retain the front side of the stock airbox and will be putting a heatshield on the rear of the filter. This will pretty much encase the filter to have the stock CAI blow on it, and yet, provide a very deep growl and added horsepower. We've got all the raw materials inbound for this project next weekend. Thanks for the support!

xcelir8brz · 07-26-2012, 12:47 PM

Quote:

Originally Posted by *KID*

nice work. how much would this run for

PM'd you.

xcelir8brz · 07-26-2012, 12:47 PM

I also have not heard from the moderators or know the process to 'officially sell these public'. So any help to get this official and posted would be beneficial to everyone.

Thanks!

xcelir8brz · 07-26-2012, 02:32 PM

Intake Parts List
1-My Custom Finished Pipe w/Grommet
1-Rustoleum Bedliner Paint (or other)
1-Spectre 8791 Black 3" Low Profile 90° Elbow Boot with 2.5" Insert and Band Clamps
1-Spectre 8771 Black Intake Tube Coupler and Band Clamps

About $100/parts worst case cost w/shipping (including cost of my pipe) + time.

xcelir8brz · 07-26-2012, 05:11 PM

>>
1-Spectre 8791 Black 3" Low Profile 90° Elbow Boot with 2.5" Insert and Band Clamps
1-Spectre 8771 Black Intake Tube Coupler and Band Clamps
>>

$41 shipped to my door from Summit Racing. Add a can of paint and my pipe and you're done!

FRSPirate · 07-26-2012, 06:40 PM

Quote:

Originally Posted by xcelir8brz

>>
1-Spectre 8791 Black 3" Low Profile 90° Elbow Boot with 2.5" Insert and Band Clamps
1-Spectre 8771 Black Intake Tube Coupler and Band Clamps
>>

$41 shipped to my door from Summit Racing. Add a can of paint and my pipe and you're done!

Did you use the 2.5" insert?

xcelir8brz · 07-26-2012, 06:58 PM

Nope.

FRSPirate · 07-26-2012, 07:14 PM

K, just making sure. Thx

xcelir8brz · 07-26-2012, 07:16 PM

3 inch system through and through

86design · 07-26-2012, 07:25 PM

Quote:

Originally Posted by xcelir8brz

Hi. Another member on this board, TBBandit, who has an bone stock FR-S, met up with me today and we gave his ride the 'xcelir8brz custom intake pipe and deletes' treatment. I'll let him provide his feedback, but from what I can tell, he is extremely happy with not only the kit I built, but the effects of what it has done to his ride as well.

Here are some pix from today's adventures:

Now, who else wants one?

I want one!!

07-25-2012, 02:47 PM	#16
KID 86-er Join Date: May 2012 Drives: BRZ tS Location: Laredo, TX Posts: 970 Thanks: 195 Thanked 253 Times in 175 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	nice work. how much would this run for __________________ 2018 Subaru BRZ ts 020/500 - My Daily, work car, and track car

07-26-2012, 02:32 PM	#22
xcelir8brz Senior Member Join Date: Jun 2012 Drives: 2013 BRZ Limited Location: Earth Posts: 1,029 Thanks: 45 Thanked 235 Times in 157 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Intake Parts List 1-My Custom Finished Pipe w/Grommet 1-Rustoleum Bedliner Paint (or other) 1-Spectre 8791 Black 3" Low Profile 90° Elbow Boot with 2.5" Insert and Band Clamps 1-Spectre 8771 Black Intake Tube Coupler and Band Clamps About $100/parts worst case cost w/shipping (including cost of my pipe) + time. Last edited by xcelir8brz; 07-26-2012 at 02:54 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Removing and Replacing BRZ/FR-S Intake, Air Filter and Noise Generator Delete	GrimmSpeed	DIY (Do-It-Yourself) Guides	99	01-25-2015 02:24 AM
Dynosty FR-S/BRZ Sound Tube Delete Kit	Dustin@Dynosty	Engine, Exhaust, Bolt-Ons	104	02-11-2014 11:35 AM
86 rubber floormats	denverizzles	Scion FR-S / Toyota 86 GT86 General Forum	30	05-06-2013 06:10 PM
xcelir8brz's - 2013 Subaru BRZ Limited	xcelir8brz	Member's Car Journals	4	06-03-2012 06:44 PM
The intake sound tube	MrVito	Scion FR-S / Toyota 86 GT86 General Forum	8	12-09-2011 08:32 PM

07-26-2012, 11:26 AM	#17
Bg8780 Senior Member Join Date: Jun 2012 Drives: '13 Black Subaru BRZ Limited Location: All over Posts: 479 Thanks: 439 Thanked 156 Times in 96 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	xcelir8brz, If you are building these for sale I would definitely be interested. Would it be possible to paint the couplers red (same red as Perrin's lightweight pulley) instead of black? If so, how much would I be looking at shipped? Great mod and looking forward to your future projects! Cheers!

07-26-2012, 12:46 PM	#19
xcelir8brz Senior Member Join Date: Jun 2012 Drives: 2013 BRZ Limited Location: Earth Posts: 1,029 Thanks: 45 Thanked 235 Times in 157 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Next weekend, I'll have time to fabricate a few more tubes. I'll also be working with TBBandit (FR-S) to make a different intake system based on this design. What we will do is build a new extended pipe, connect it to the throttle body with a coupler, will be longer by a few inches towards the front of the car, then a 90 degree coupler on that towards the drivers side, a MAF adapter, then a cone filter. We will retain the front side of the stock airbox and will be putting a heatshield on the rear of the filter. This will pretty much encase the filter to have the stock CAI blow on it, and yet, provide a very deep growl and added horsepower. We've got all the raw materials inbound for this project next weekend. Thanks for the support!

07-26-2012, 12:47 PM	#21
xcelir8brz Senior Member Join Date: Jun 2012 Drives: 2013 BRZ Limited Location: Earth Posts: 1,029 Thanks: 45 Thanked 235 Times in 157 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	I also have not heard from the moderators or know the process to 'officially sell these public'. So any help to get this official and posted would be beneficial to everyone. Thanks!

07-26-2012, 05:11 PM	#23
xcelir8brz Senior Member Join Date: Jun 2012 Drives: 2013 BRZ Limited Location: Earth Posts: 1,029 Thanks: 45 Thanked 235 Times in 157 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	>> 1-Spectre 8791 Black 3" Low Profile 90° Elbow Boot with 2.5" Insert and Band Clamps 1-Spectre 8771 Black Intake Tube Coupler and Band Clamps >> $41 shipped to my door from Summit Racing. Add a can of paint and my pipe and you're done!

07-26-2012, 06:58 PM	#25
xcelir8brz Senior Member Join Date: Jun 2012 Drives: 2013 BRZ Limited Location: Earth Posts: 1,029 Thanks: 45 Thanked 235 Times in 157 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Nope.

07-26-2012, 07:16 PM	#27
xcelir8brz Senior Member Join Date: Jun 2012 Drives: 2013 BRZ Limited Location: Earth Posts: 1,029 Thanks: 45 Thanked 235 Times in 157 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	3 inch system through and through

User Name		Remember Me?
Password