Factory Clear Paint Protection - What is it exactly? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

JohnATL · 07-25-2012, 07:25 PM

Factory Clear Paint Protection $199

This is listed as an accessory on my car that's due to arrive at the dealer tomorrow. My question is, what exactly is this? Does it compare to Opti-Coat? Should I still get Clear-bra and Opti-Coat?

JohnATL · 07-25-2012, 10:10 PM

Has anyone who had this factory accessory had Clear-Bra or Opti-Coat installed? I'm thinking this isn't much of anything but want to be sure.

86_ZN6 · 07-25-2012, 10:13 PM

It's a half cut hood and fender clear bra

JohnATL · 07-25-2012, 10:26 PM

Quote:

Originally Posted by 86_ZN6

It's a half cut hood and fender clear bra

So no need for another Clear-Bra but Opti-Coat would still be needed for the rest of the body.

W2 · 07-25-2012, 11:34 PM

Quote:

Originally Posted by JohnATL

So no need for another Clear-Bra but Opti-Coat would still be needed for the rest of the body.

There are 2 standard options. The hood/fender set and then front bumper alone. Judging by the price you are getting the hood/fender set and these cover very little.

Opti-Coat is a great way to go and can be used right over top of a clear bra. It will not help with rock chips and etc. like a clear bra but it is an amazing product.

TPO · 07-26-2012, 12:33 AM

Quote:

Originally Posted by 86_ZN6

It's a half cut hood and fender clear bra

Wrong, it's door edge protection, door handle under guads, lower quarterpanel protection and rear bumper protection. It is installed at the port in Jacksonville FL.

Hawaiian · 07-26-2012, 12:41 AM

Quote:

Originally Posted by Toyotapartsoutlet

Wrong, it's door edge protection, door handle under guads, lower quarterpanel protection and rear bumper protection. It is installed at the port in Jacksonville FL.

Correct, the hood and fender option cost $400 while the bumper is another $600.

jarviz · 07-26-2012, 01:01 AM

Quote:

Originally Posted by Toyotapartsoutlet

Wrong, it's door edge protection, door handle under guads, lower quarterpanel protection and rear bumper protection. It is installed at the port in Jacksonville FL.

So sounds like it's not putting protection on the most important part, hood and front bumper. I heard dealership paint protection isn't he best quality either.

86_ZN6 · 07-26-2012, 01:33 AM

Quote:

Originally Posted by Toyotapartsoutlet

Wrong, it's door edge protection, door handle under guads, lower quarterpanel protection and rear bumper protection. It is installed at the port in Jacksonville FL.

hmmm... never heard of that option. when i bought my car back in may, there was only the hood and fender protection and rear bumper applique

JohnATL · 07-26-2012, 11:32 AM

I appreciate all the feedback. Sounds like I still need to protect the front and hood.

l0xns0cks · 07-29-2012, 02:48 PM

Im in the same boat. I had the factory protection put on. It indeed only protects certain parts. Now its time to add the opti-coat.

DaJo · 07-29-2012, 03:06 PM

Just don't tailgate on the highway/freeway and you'll be fine!...

07-25-2012, 07:25 PM	#1
JohnATL Senior Member Join Date: Jul 2012 Drives: 2013 Scion FR-S MT Raven Location: Atlanta, GA Posts: 133 Thanks: 26 Thanked 62 Times in 24 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Factory Clear Paint Protection - What is it exactly? Factory Clear Paint Protection $199 This is listed as an accessory on my car that's due to arrive at the dealer tomorrow. My question is, what exactly is this? Does it compare to Opti-Coat? Should I still get Clear-bra and Opti-Coat?

07-29-2012, 03:06 PM	#12
DaJo FT86Club Vancouver Join Date: Jun 2012 Drives: BRZ Sport-Tech; Drove: MR-S, AE86 Location: Vancouver, BC Posts: 2,533 Thanks: 391 Thanked 1,180 Times in 634 Posts Mentioned: 16 Post(s) Tagged: 2 Thread(s)	Just don't tailgate on the highway/freeway and you'll be fine!... __________________ 1984 AE86 BT 20V 5MT 2007-2012 2000 MR-S 5MT 2010-2012 2013 BRZ Sport-Tech 6AT Since '12 (OEM+ STI tS Build) 2015 Lexus IS250 AWD F-Sport 2 2015-2018 2018 Lexus NX300 F-Sport 3 Since '18

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Factory Paint Protection Film	F1point4	Cosmetic Maintenance (Wash, Wax, Detailing, Body Repairs)	15	01-28-2013 07:49 PM
Toyota Paint Protection Package	AGM6789	AUSTRALIA	16	06-29-2012 01:46 AM
Paint Protection Anyone?	Marloon	Scion FR-S / Toyota 86 GT86 General Forum	27	05-11-2012 03:17 PM
Mandatory Paint Protection	ant08	BRZ First-Gen (2012+) — General Topics	15	04-05-2012 11:30 PM

07-25-2012, 10:10 PM	#2
JohnATL Senior Member Join Date: Jul 2012 Drives: 2013 Scion FR-S MT Raven Location: Atlanta, GA Posts: 133 Thanks: 26 Thanked 62 Times in 24 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Has anyone who had this factory accessory had Clear-Bra or Opti-Coat installed? I'm thinking this isn't much of anything but want to be sure.

07-25-2012, 10:13 PM	#3
86_ZN6 Senior Member Join Date: Apr 2012 Drives: 86 ZN6 Location: SF Bay Area, NorCal Posts: 4,682 Thanks: 1,317 Thanked 2,072 Times in 1,222 Posts Mentioned: 126 Post(s) Tagged: 1 Thread(s)	It's a half cut hood and fender clear bra

07-26-2012, 11:32 AM	#10
JohnATL Senior Member Join Date: Jul 2012 Drives: 2013 Scion FR-S MT Raven Location: Atlanta, GA Posts: 133 Thanks: 26 Thanked 62 Times in 24 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I appreciate all the feedback. Sounds like I still need to protect the front and hood.

07-29-2012, 02:48 PM	#11
l0xns0cks Member Join Date: Jul 2012 Drives: 2013 Scion FRS Raven Location: Tustin, Ca Posts: 11 Thanks: 0 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Im in the same boat. I had the factory protection put on. It indeed only protects certain parts. Now its time to add the opti-coat.

User Name		Remember Me?
Password