TEIN Street basis Z, not satisfied, want to go lower - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

DubBoomin · 08-13-2020, 06:50 AM

I got TEIN street basis z coilovers for my 13 Scion FR-S and I’m not satisfied with how low they go. Is there anyway I can make them go lower and how? The coilovers aren’t maxed out because when I max them out the springs move around and I’m not sure if that’s normal or not.

Joveen · 08-13-2020, 03:35 PM

To get a lower look get more rubber. Lower control arms work too. I have the street basis z and plan on upgrading because they are bumpy and with going lower i would want to set damping which you can't with these teins. My car is almost maxed out. The front could be better but because of the roads and no damping I won't risk it.

My setup is: 18x9.5 +35 on 255/35/18 no rub. Still need to do an alignment tho. Lol.

Sent from my SM-N960U using Tapatalk

strat61caster · 08-14-2020, 05:06 PM

Quote:

Originally Posted by DubBoomin

The coilovers aren’t maxed out because when I max them out the springs move around and I’m not sure if that’s normal or not.

If you want the looks without spending the money and don't give a shit about ride quality then slam the coilovers. You won't die because the springs are loose when the car is in the air.

Drive safe.

NARFALICIOUS · 08-15-2020, 03:34 AM

Quote:

Originally Posted by Joveen

To get a lower look get more rubber. Lower control arms work too. I have the street basis z and plan on upgrading because they are bumpy and with going lower i would want to set damping which you can't with these teins. My car is almost maxed out. The front could be better but because of the roads and no damping I won't risk it.

My setup is: 18x9.5 +35 on 255/35/18 no rub. Still need to do an alignment tho. Lol.

Sent from my SM-N960U using Tapatalk

What is your drop in inches from stock, if you don't mind me asking?

08-13-2020, 06:50 AM	#1
DubBoomin Junior Member Join Date: Aug 2020 Drives: 2013 Scion FR-S Location: California Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	TEIN Street basis Z, not satisfied, want to go lower I got TEIN street basis z coilovers for my 13 Scion FR-S and I’m not satisfied with how low they go. Is there anyway I can make them go lower and how? The coilovers aren’t maxed out because when I max them out the springs move around and I’m not sure if that’s normal or not.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ST vs Tein Street Basis Z	RustyS14	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	9	11-29-2017 02:34 AM
Tein Street-basis	Slammillionaire	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	2	07-26-2017 05:15 PM
(LA/OC) FS: Tein Street Basis	xais	Brakes, Suspension, Chassis	1	05-05-2016 07:07 PM
Tein Street Basis	dito	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	6	09-12-2015 08:40 PM
Tein street basis, not satisfied, want to go lower	Vancityfrs	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	14	09-06-2015 08:11 PM

08-13-2020, 03:35 PM	#2
Joveen Senior Member Join Date: Mar 2018 Drives: Bone stock Location: Windsor, CT Posts: 776 Thanks: 535 Thanked 234 Times in 164 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	To get a lower look get more rubber. Lower control arms work too. I have the street basis z and plan on upgrading because they are bumpy and with going lower i would want to set damping which you can't with these teins. My car is almost maxed out. The front could be better but because of the roads and no damping I won't risk it. My setup is: 18x9.5 +35 on 255/35/18 no rub. Still need to do an alignment tho. Lol. Sent from my SM-N960U using Tapatalk

User Name		Remember Me?
Password