WHAT DID YOU DO TO YOUR BRZ TODAY?

[JonAvalon]

Originally Posted by norcalpb

Have you noticed any vibrations with the project kics hub adapters? I want to buy them, but the “Subaru” version lists a 56mm bore instead of the 56.1mm that we actually have. I’m sure it can’t make too crazy of a difference, but I am paranoid about that kinda stuff

Nope none at all, it's been good so far. Yea that confused me as well when I was buying them, but it seems like just list the whole number instead of putting the ".1 etc" for any of the sizes. It fit just like any other hub ring with no issues.

[spcmafia]

Got my 18 BRZ about a month ago, and it wasnt long until I started throwing money at the car like a horny 18 year old soldier, at the strip club, straight out from basic.
Last week after a long wait on parts I ordered, I got a K&N drop filter, Perrin Inlet Hose, Perrin Rear Shifter Bushing (Amazing), Changed LSD/Trans fluids with Motul, Invidia Q300 catback with a HKS double Resonated Frontpipe, and finally got my OFT Stage One tune.

I decided that I can't know that I'm broke if I don't look into my bank account. Do I regret it? Absolutely not. I'm in love with this car.

[marky]

been a while but my brz ts 2020... clear marker,sti aero oem jdm,toms,shift boot,3d floor mats,3rd break light fog rear,led back up, led door sides, little carbon trims inside and red ac vents..also making a little micro replica drift car rc of it im number 54 made a custom heat shrink

my custom plates came in but due to this virus thing going on very hard to get a hold of dmv now so ill rock fresh dealer tags forever

need to install sti exhaust and hks coils

[N_Raged]

I added two cylinders. What kind of power gains can I expect?

[dpfarr]

Put the front piece of my sti kit on.

[marky]

Originally Posted by dpfarr

Put the front piece of my sti kit on.

that was the worse part lol.. the sides and rear and diffuser is the easy ones...i did feel the aero kit when i went over 70+mph but got use to it fast lol.. not even a day of driving

[dpfarr]

Right on. That makes me feel better cause I drilled a shit ton of holes in my car tonight.

[marky]

Originally Posted by dpfarr

Right on. That makes me feel better cause I drilled a shit ton of holes in my car tonight.

Yeah lots of holes on the front under the bumper.. i kinda miss ailing a like 3 holes made it a tiny bit bigger lol.. all good cant see it under anyways.. and plus the front bumper will not stay new perfect lol.. nust enjoy life of what you have and have fun with the car not worry about little things

[NoHaveMSG]

Installed a fresh set of friction rings on the front. Got 3 years and a bunch of track days out of my stoptech 328x28 setup. Also installed new gopro mount, that mounts to the bar of the headrest. Seems pretty sturdy, hopefully the new angle works out better then mounting to the back window.

[MJones_RB]

Originally Posted by marky

..also making a little micro replica drift car rc of it

Where do you get those little RC drift cars?

[soundman98]

Originally Posted by marky

been a while but my brz ts 2020... clear marker,sti aero oem jdm,toms,shift boot,3d floor mats,3rd break light fog rear,led back up, led door sides, little carbon trims inside and red ac vents..also making a little micro replica drift car rc of it im number 54 made a custom heat shrink

my custom plates came in but due to this virus thing going on very hard to get a hold of dmv now so ill rock fresh dealer tags forever

need to install sti exhaust and hks coils

DETAILS!!!

it's not a mini z, too large. and it's not a tamiya design variant, too small!

[spike021]

A friend of mine spent several hours across the past three days doing a full detail, paint correction, and a couple layers of ceramic on the car. I figured after a little more than 3 years of ownership, the car was due for a more thorough cleaning than I'm capable of. Especially important since it's a 24/7 outdoors, daily car so it gets shat on and whatnot every day regardless of how recently I've cleaned it/wiped it down.

I've got a couple different external parts going on tomorrow, which I'll share photos of later, but I took a few photos this evening while the car is still pristine:

[marky]

Originally Posted by MJones_RB

Where do you get those little RC drift cars?

Originally Posted by soundman98

DETAILS!!!

this a crazy one lol BMRX its kit car. havey modding needs to be done for this its not a typical rc ones out there they make like mini z thats pretty much easy to just get going...

it's not a mini z, too large. and it's not a tamiya design variant, too small!

its 1/24 scale adjustable bmrx kit.. using tamiya body model scale for it. its like 5 times the cost of a mini z lol kit alone was like 420 and then motor/esc/servo/gyro another 200$ then body paint lights ect.... already have a radio futaba 7px and lots of batteries ect.. this thing almost the cost of my yokomo 1/10 drift cars lol

[DGMlJDlBRZ]

Took it out of the garage today for the first time since the first week of April. Had been slowly putting the car back to stock since then during the whole Stay at Home Order crap, even though my job still had me working lol.


Top pic was what it looked like before April. Bottom pic was taken today right after I picked it up from the alignment shop to get it closer to being put up for sale. Was fun while it lasted!