Random Thoughts - Part Deux [NO POLITICS]

[Dadhawk]

Originally Posted by humfrz

I'm ah gonna start using the same password for everything:

1234@AAaa



humfrz

In some systems you could do that (although most systems these days won't allow the sequential numbers or the same characters repeated). What you can do is come up with two phrases and then change the center character (the "@") whenever a change is required.

Then you can just go straight across the keyboard each time for the change.

I would recommend the phrases be between 6 and 8 characters (not a dictionary word) each though for a total 13 to 17 character password.

[Spuds]

Originally Posted by Dadhawk

In somesystems you could do that (although most systems these days won't allow the sequential numbers or the same characters repeated). What you can do is come up with two phrases and then change the center character (the "@") whenever a change is required.

Then you can just go straight across the keyboard each time for the change.

I would recommend the phrases be between 6 and 8 characters (not a dictionary word) each though for a total 13 to 17 character password.

CorrectHorseBatteryStaple1!


From xkcd:

[qcbaker]

Originally Posted by Spuds

CorrectHorseBatteryStaple1!


From xkcd:

https://diogomonica.com/2014/10/11/p...s-not-correct/

[JD001]

Originally Posted by humfrz

I'm ah gonna start using the same password for everything:

1234@AAaa

:

humfrz

Oi!! That's my password. Get your own!!

[Ultramaroon]

Make up a password that's easy to remember like mom's first name


Mu@pte2rlmfn


Then use a password manager like the article in @qcbaker's link suggests.

[Spuds]

Originally Posted by qcbaker

https://diogomonica.com/2014/10/11/p...s-not-correct/

Originally Posted by Ultramaroon

Make up a password that's easy to remember like mom's first name


Mu@pte2rlmfn


Then use a password manager like the article in @qcbaker's link suggests.

What if someone cracks your password manager?

[qcbaker]

Originally Posted by Spuds

What if someone cracks your password manager?

[p1l0t]

Originally Posted by p1l0t

Hmmm... P000B (again even after a reset) in my Fiancée's Impreza. The oil level is good, I doubled checked its the correct oil. Time to test some sensors. Although the 2nd time there was a pending P0300 cyl misfire but plugs are new. So possibly a bad wire or coil pack but maybe that's an effect not a cause? Checking the camshaft position sensors now because they are cheaper to replace than coil packs.


Sent from my SM-G975U using Tapatalk

Soooo I made it worse. But that's a good thing. Because I put them all back in different places. This time I got P0365 and P0366 which is Sensor B bank 1 (exhaust cylinder 1 according to Google). So now I know which one it is! That's right I'm playing chess not checkers ya lil bish. Too bad the new one doesn't arrive till Mon. Megan is actually happy about it because now I have chauffer her around everywhere this weekend in the sleeper.

Sent from my SM-G975U using Tapatalk

[NoHaveMSG]

Originally Posted by Ultramaroon

lol x2

You probably would have had better questions then I did. I thought the critical phase transformation temperature was 1525F min., turns out I am good as long as I am not holding 1300-1400F before quenching for an extended period of time. So it was better news then I was expecting. The only processing change I need to make is preheating the forming patterns so they are not soaking so much out of the first few pieces.

Now to highlight the report and give it to the guys in the back as "homework."

[Ultramaroon]

Originally Posted by NoHaveMSG

You probably would have had better questions then I did.

I doubt it. The only good questions are those directly addressing your needs. I'm just ghey for cool smart people that enjoy sharing. Sounds like it was time well spent.

[NoHaveMSG]

Originally Posted by Ultramaroon

I doubt it. The only good questions are those directly addressing your needs. I'm just ghey for cool smart people that enjoy sharing. Sounds like it was time well spent.

lol Oh I get it.

I enjoy picking up what I can and learning from people who know as well. One of the guys I regularly see at the track is a retired Boeing NVH engineer. He's been helping me with some crude practical solutions to some issues I have been having. Basically he believes duct tape is the answer to the vibration issue with my one piece aluminum drive shaft I haven't been under the car yet to try to apply the magic fix.

[Ultramaroon]

Originally Posted by NoHaveMSG

lol Oh I get it.

I enjoy picking up what I can and learning from people who know as well. One of the guys I regularly see at the track is a retired Boeing NVH engineer. He's been helping me with some crude practical solutions to some issues I have been having. Basically he believes duct tape is the answer to the vibration issue with my one piece aluminum drive shaft I haven't been under the car yet to try to apply the magic fix.

Sounds like my kind of guy. Vibration control and acoustics is yet another field in which I've professionally dabbled. ...in the past. I've settled down since then. Now I just tinker in my spare time. My day gig isn't anything glorious but it's good honest work.

[humfrz]

Originally Posted by JD001

Oi!! That's my password. Get your own!!

Oh, I see you don't have much money in your bank account -


humfrz

[p1l0t]

Originally Posted by humfrz

Oh, I see you don't have much money in your bank account -





humfrz

Yeah I was going take some but it's not even worth the risk over $37.50

Sent from my SM-G975U using Tapatalk