Sunday 'Top Trumps'

[JD001]

Originally Posted by Ultramaroon

Lots of throttle blipping & clutch dragging? I'll bet it idles at 20 MPH in first gear.

It was very mechanical, and clattery. I'm sure once warmed through it probably settles down.

[Atmo]

Originally Posted by JD001

Visited my friend today, in his apartment I hear what sounds like a bag of spanners thrown down the stairs.. look out of the window and what do I see??

A real GT40!!! Followed by a 288GTO!! Followed by a F40!!

So once again I'm breaking my own rules, but I'm sure you'll forgive me.

Good God, man, might as well shut this thread down now.

[Ultramaroon]

Originally Posted by JD001

It was very mechanical, and clattery. I'm sure once warmed through it probably settles down.

A la Ducati top end, or Harley clutch?

[JD001]

Originally Posted by Ultramaroon

A la Ducati top end, or Harley clutch?

More like a Ducati with a dry racing clutch.. sounded like valve gear with transmission clatter.

[JD001]

Originally Posted by Atmo

Good God, man, might as well shut this thread down now.

I think that you may have a good point.. Where we live is a real hot spot for stupidly expensive cars..

[Ultramaroon]

Originally Posted by JD001

More like a Ducati with a dry racing clutch.. sounded like valve gear with transmission clatter.

I've always thought that the Ducati sound came from its valves. Just googled for the first time.

[EAGLE5]

Originally Posted by Ultramaroon

I need a bubble like that in the roof of my FRS.

I bet you can cut into the floor pan and drop the seat a bit more. Add in a low profile seat rail and you're doing awesome.

[JD001]

Originally Posted by jsimon7777

I bet you can cut into the floor pan and drop the seat a bit more. Add in a low profile seat rail and you're doing awesome.

Having a bubble on the roof is more fun.. Double bubble even better..

[Sapphireho]

Originally Posted by Ultramaroon

I need a bubble like that in the roof of my FRS.

I'll bring my rubber mallet when I visit. Should be no problem.

[Ultramaroon]

Originally Posted by jsimon7777

I bet you can cut into the floor pan and drop the seat a bit more. Add in a low profile seat rail and you're doing awesome.

I've considered it but not for a long time. Now I have to pull the seat and take a good, hard look.

[Ultramaroon]

Originally Posted by JD001

Having a bubble on the roof is more fun.. Double bubble even better..

dat rollover doe

[EAGLE5]

Originally Posted by Ultramaroon

I've considered it but not for a long time. Now I have to pull the seat and take a good, hard look.

https://www.trackjunkies.org/topic/5...ped-floor-pan/

Fuck being on topic.

Seat mods are easier, if you can get it to fit.

[Sapphireho]

Originally Posted by Ultramaroon

dat rollover doe

Your going to rollover?

[Ultramaroon]

Originally Posted by jsimon7777

https://www.trackjunkies.org/topic/5...ped-floor-pan/

Fuck being on topic.

Seat mods are easier, if you can get it to fit.

Would be a challenge to preserve structure in the spirit of the design. The rails mount to those very nice beams.

https://i.imgur.com/7grgAFx.png