JDL 4-2-1 EL header - Page 13 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

RayRay88 · 04-17-2019, 09:45 AM

Ugh this is not what I wanted to hear.

Bye bye money...

I've been following this header since the beginning and it seems like a perfect alternative to the ACE, not to mention I was probably going to get Sasha to tune it too.

I'm assuming Ecutek and 94 Octane?

JBezugs · 04-17-2019, 10:22 AM

Quote:

Originally Posted by RayRay88

Ugh this is not what I wanted to hear.

Bye bye money...

I've been following this header since the beginning and it seems like a perfect alternative to the ACE, not to mention I was probably going to get Sasha to tune it too.

I'm assuming Ecutek and 94 Octane?

Yes sir, ECUTek and Ultra94. Stock over pipe and front pipe, Invidia R400 catback.

86MLR · 04-17-2019, 10:30 AM

Quote:

Originally Posted by JBezugs

Got my header installed at Touge Tuning and tuned with OnPoint Dyno today!

Sasha said that it’s one of the highest HP NA BRZ’s he’s ever had. Car pulls strong right to redline and the torque dip is all but gone. These numbers are with the stock overpipe and front pipe still in place.

For reference, this dyno is a bit of a heartbreaker... stock BRZ’s typically make anywhere from 140 to 155hp on this dyno.

https://instagram.com/p/BwVoVQAAqN_/ Dyno pull is on my Instagram!

Those numbers are typical for pre-tuned cars here in AU, mine pre-tuned was 155hp with intake and exhaust mods.

Enjoy

tobin · 04-17-2019, 10:38 AM

Quote:

Originally Posted by JBezugs

Yes sir, ECUTek and Ultra94. Stock over pipe and front pipe.

Sound clips, please.

RayRay88 · 04-17-2019, 11:07 AM

Quote:

Originally Posted by tobin

Sound clips, please.

Check out his instagram link in the post, he has a dyno video up.

CounterSpace Garage · 04-17-2019, 04:53 PM

Quote:

Originally Posted by RayRay88

Ugh this is not what I wanted to hear.

Bye bye money...

I've been following this header since the beginning and it seems like a perfect alternative to the ACE, not to mention I was probably going to get Sasha to tune it too.

I'm assuming Ecutek and 94 Octane?

Sasha at OnPoint is a beast. Absolutely cool guy and we're very impressed with his work. We've been in contact with JDL for some time and we know he has been putting a lot of effort to ensure the fitment is spot on. Hope to get some for our clients soon!

StraightOuttaCanadaEh · 04-17-2019, 08:52 PM

I guess being an EL header, this would be loud as hell with a Corsa exhaust eh?

Roadcone · 04-17-2019, 09:00 PM

Quote:

Originally Posted by StraightOuttaCanadaEh

I guess being an EL header, this would be loud as hell with a Corsa exhaust eh?

Any catless header will be loud.

Sent from my Pixel 2 XL using Tapatalk

JBezugs · 04-17-2019, 09:01 PM

Here’s a little clip with my Invidia R400; stock over pipe and front pipe by the way.

jflogerzi · 04-18-2019, 10:23 AM

Quote:

Originally Posted by JBezugs

Here’s a little clip with my Invidia R400; stock over pipe and front pipe by the way.

That's not bad at all. It has a stock ish sound. I am kinda getting tired of the UEL sound.

Sent from my ONEPLUS A5010 using Tapatalk

RToyo86 · 04-18-2019, 10:39 AM

Quote:

Originally Posted by StraightOuttaCanadaEh

I guess being an EL header, this would be loud as hell with a Corsa exhaust eh?

I had the same thought run through my head.
I think we're pretty much stuck with the FT86SF catted UEL.

I haven't heard the JDL catted EL with a Corsa yet. That could work.

StraightOuttaCanadaEh · 04-18-2019, 04:08 PM

Quote:

Originally Posted by RToyo86

I had the same thought run through my head.
I think we're pretty much stuck with the FT86SF catted UEL.

I haven't heard the JDL catted EL with a Corsa yet. That could work.

Yeah the FT86SF is already borderline too loud for me but then I hear most other high performance cars on the road and I don’t even know why I’m worried.

JBezugs · 04-18-2019, 06:03 PM

Following up as I think I have the same clearance issue that others have had with the aluminum underbody shield. My header was a first run.

Hearing a buzzing noise at low-mid rpm under load with my new header; and you can also hear it on cold starts. Video for reference, is it the shield?

EDIT: Fixed skid plate, "thrumming noise" still there. Leaky header perhaps? Check my most recent post.

Roadcone · 04-18-2019, 06:08 PM

I don't hear anything lol

Sent from my Pixel 2 XL using Tapatalk

04-17-2019, 08:52 PM	#175
StraightOuttaCanadaEh Wes Join Date: Feb 2017 Drives: Artisan Spirits '17 86 Location: Toronto Posts: 2,871 Thanks: 1,255 Thanked 1,734 Times in 1,025 Posts Mentioned: 21 Post(s) Tagged: 0 Thread(s)	I guess being an EL header, this would be loud as hell with a Corsa exhaust eh? __________________ Instagram: @gt86ws

04-17-2019, 09:01 PM	#177
JBezugs Good Job Subaru! Join Date: Mar 2016 Drives: '24 CX-50 Meridian Location: Toronto, Ontario, Canada Posts: 355 Thanks: 146 Thanked 336 Times in 157 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Here’s a little clip with my Invidia R400; stock over pipe and front pipe by the way. __________________ My (no longer Green) 2017 BRZ Build Thread Last edited by JBezugs; 06-03-2020 at 01:53 PM.

04-18-2019, 06:03 PM	#181
JBezugs Good Job Subaru! Join Date: Mar 2016 Drives: '24 CX-50 Meridian Location: Toronto, Ontario, Canada Posts: 355 Thanks: 146 Thanked 336 Times in 157 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Following up as I think I have the same clearance issue that others have had with the aluminum underbody shield. My header was a first run. Hearing a buzzing noise at low-mid rpm under load with my new header; and you can also hear it on cold starts. Video for reference, is it the shield? EDIT: Fixed skid plate, "thrumming noise" still there. Leaky header perhaps? Check my most recent post. __________________ My (no longer Green) 2017 BRZ Build Thread Last edited by JBezugs; 08-08-2022 at 10:06 PM.

04-18-2019, 06:08 PM	#182
Roadcone StreetKart Join Date: Jul 2013 Drives: 2014 Scion FR-S Monogram Location: Upstate, SC Posts: 477 Thanks: 43 Thanked 181 Times in 111 Posts Mentioned: 10 Post(s) Tagged: 1 Thread(s)	I don't hear anything lol Sent from my Pixel 2 XL using Tapatalk __________________ TRD\|Verus Engineering\|Titan7\|DEZOD Motorsports\|JDL Auto Design

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
JDL UEL header/Nameless header-back exhaust (Atlanta area)	carbon_raven	Engine, Exhaust, Bolt-Ons	16	05-09-2015 03:26 AM
Who has Open Flash Header (or aftermarket UEL header) in the GTA with stock exhaust?	alanhung85	CANADA	6	10-21-2014 11:41 PM
RevWorks UEL Header + Nameless Catted Front Pipe VS Stock Gutted Header + FP	NickFRS	Engine, Exhaust, Transmission	44	04-19-2014 06:42 PM
Top Gear Solutions\| HKS Header \|Borla EL & UEL Headers\| Agency Power Header\| + MORE!	TopGearSolutions	Engine, Exhaust, Bolt-Ons	82	04-14-2014 09:16 PM
Gutted cat stock header vs aftermarket catless header NA application	stevo585	Engine, Exhaust, Transmission	8	04-04-2014 05:12 PM

04-17-2019, 09:45 AM	#169
RayRay88 Senior Member Join Date: Feb 2018 Drives: 2017 86 860 Special Edition Location: Toronto Posts: 559 Thanks: 198 Thanked 462 Times in 241 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Ugh this is not what I wanted to hear. Bye bye money... I've been following this header since the beginning and it seems like a perfect alternative to the ACE, not to mention I was probably going to get Sasha to tune it too. I'm assuming Ecutek and 94 Octane?

User Name		Remember Me?
Password